

SPROJ3G2 Controller PCB
SPROJ3G2 PTX PCB - KiCad files
- Size
- 100 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 69
- Nets
- 78
- Pads
- 251
- Tracks, vias
- 523, 221
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 9 Dec 2024
- Updated
- 20 Dec 2024
Overview
SPROJ3G2 Controller PCB is an open-source printed circuit board by boenike, from the boenike/SPROJ3G2_PTX_PCB repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 60 mm with 69 parts on 78 nets, routed with 523 tracks and 221 vias.
It is built around the RP2040, W25Q128JVSIQ and AMS1117-3.3, with the THB001P, ZXMN3A03E6TA and ABM8-272-T3 among its other parts. Its parts include 17 capacitors, 14 resistors, 5 connectors, 5 switches and 3 ICs. It belongs with the RP2040 boards of this library.
Main components
6RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTHB001P
插件-14P,21x17mm插件-14P,21x17mm Multi-Directional Switches ROHSC&KMulti-Directional SwitchesZXMN3A03E6TA
SOT-26-55℃~+150℃ 1 N-channel 1.7W 104pF 12.6nC@10V 1V 30V 4.6A 50mΩ@10V 58.5pF 600pF N-Channel ±20V SOT-26 MOSFETs ROHSDiodes IncorporatedMOSFETsABM8-272-T3
SMD3225-4P-40℃~+85℃ 10pF 12MHz 50Ω SMD crystal oscillator ±30ppm ±30ppm SMD3225-4P Crystals ROHSAbraconCrystals
README
README.mdSPROJ3G2_PTX_PCB
SPROJ3EEG2 PTX PCB - KiCad files
Author: Bence Tóth
Course: BEng in Electronics
Campus: SDU Sonderborg
Semester: 3rd
Finish date: 2024/12/23
Parts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100n | Capacitor_SMD:C_0805_2012Metric | C1, C6, C7, C8, C9, C10, C12, C13, C16 |
| 8 | 5K1 | Resistor_SMD:R_0805_2012Metric | R1, R2, R5, R6, R7, R9, R13, R14 |
| 3 | 1u | Capacitor_SMD:C_0805_2012Metric | C11, C14, C17 |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 2 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 2 | 15p | Capacitor_SMD:C_0805_2012Metric | C4, C5 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric | R4, R10 |
| 2 | 27 | Resistor_SMD:R_0805_2012Metric | R11, R12 |
| 2 | 431183015816 | Switch_431183015816:431183015816 | S3, S4 |
| 2 | GNDTP | TestPoint:TestPoint_Pad_D1.0mm | TP5, TP9 |
| 2 | THB001P | Joystick_THB001P:THB001P | S1, S2 |
| 2 | ZXMN3A03E6TA | NMOS_ZXMN3A03E6TA:ZXMN3A03E6TA | Q1, Q2 |
| 1 | +5VTP | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C15 |
| 1 | 2137160001 | USB_C_Port_213716-0001:2137160001 | J3 |
| 1 | ABM8-272-T3 | Crystal_12MHz:ABM8-272-T3_ABR | X1 |
| 1 | ADC2 | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | ADC3 | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | BMS Con | Connector_JST:JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J2 |
| 1 | CETP | TestPoint:TestPoint_Pad_D1.0mm | TP17 |
| 1 | CSNTP | TestPoint:TestPoint_Pad_D1.0mm | TP14 |
| 1 | DNP | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | GPIO12 | TestPoint:TestPoint_Pad_D1.0mm | TP10 |
| 1 | GPIO13 | TestPoint:TestPoint_Pad_D1.0mm | TP11 |
| 1 | GPIO14 | TestPoint:TestPoint_Pad_D1.0mm | TP12 |
| 1 | GPIO15 | TestPoint:TestPoint_Pad_D1.0mm | TP13 |
| 1 | MISOTP | TestPoint:TestPoint_Pad_D1.0mm | TP15 |
| 1 | MOSITP | TestPoint:TestPoint_Pad_D1.0mm | TP18 |
| 1 | MTS-102 | Toggle_Switch_MTS-102:Toggle_Switch_MTS-102 | SW1 |
| 1 | OLED Con | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | RF_Con | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J5 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U3 |
| 1 | SCKTP | TestPoint:TestPoint_Pad_D1.0mm | TP16 |
| 1 | SWCLKTP | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | SWDIO Con | Connector_JST:JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | J1 |
| 1 | SWDTP | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | UARTRXTP | TestPoint:TestPoint_Pad_D1.0mm | TP7 |
| 1 | UARTTXTP | TestPoint:TestPoint_Pad_D1.0mm | TP8 |
| 1 | W25Q128JVSIQ | SPI_Flash_W25Q128JVSIQ:W25Q128JVSIQ | U1 |
The 68 most common of 69 parts.
Similar boards
- 2 layers65.1 × 60 mm

- 2 layers110 × 52 mm

- 2 layers62 × 47 mm

- 4 layers279.5 × 97 mm

Alpha centauri pcb
jacob-w-gable/alpha_centauri
A split, ergonomic, mechanical keyboard with 40 keys, designed for typing speed and comfort.
224 parts1MIT - 4 layers51.1 × 40.7 mm

- 4 layers91 × 91 mm

- 4 layers45 × 76 mm

- 4 layers30.2 × 53.2 mm

TGC Core Pico v2
ThatGuyCodes605/TGC-Core-2040-v2
A Raspberry-PI-Pico-Like devboard based around the RP2040 microcontroller
32 partsGPL-3.0
Questions
How big is the SPROJ3G2 Controller PCB PCB?
It measures 100 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SPROJ3G2 Controller PCB use?
69 parts, built around the RP2040, W25Q128JVSIQ, AMS1117-3.3 and THB001P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SPROJ3G2 Controller PCB KiCad files?
From the boenike/SPROJ3G2_PTX_PCB repository on GitHub, at the commit this page was made from: the board is SPROJ3G2_Controller_PCB.kicad_pcb and its schematic SPROJ3G2_Controller_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SPROJ3G2 Controller PCB design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).