

TGC Core Pico v2
A Raspberry-PI-Pico-Like devboard based around the RP2040 microcontroller
- Size
- 30.2 × 53.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 55
- Pads
- 185
- Tracks, vias
- 1,313, 77
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 31 May 2026
- Updated
- 7 Jun 2026
Overview
TGC Core Pico v2 is an open-source printed circuit board by ThatGuyCodes605, from the ThatGuyCodes605/TGC-Core-2040-v2 repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 30.2 × 53.2 mm with 32 parts on 55 nets, routed with 1,313 tracks and 77 vias.
It is built around the RP2040, W25Q128JVSIQ and AMS1117-3.3, with the ABM8-272-T3 among its other parts. Its parts include 16 capacitors, 7 resistors, 3 ICs, 3 connectors and 1 diode. It belongs with the microcontroller boards boards and the RP2040 boards of this library.
Main components
4RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsABM8-272-T3
SMD3225-4P-40℃~+85℃ 10pF 12MHz 50Ω SMD crystal oscillator ±30ppm ±30ppm SMD3225-4P Crystals ROHSAbraconCrystals
README
README.mdTGC-Core-Pico-v2

Overview
The TGC-Core-Pico-v2 is an open-source, IoT-ready hardware development board designed around the Pico architecture (e.g., RP2040). Engineered for high performance, modern connectivity, and sensor [...]
This repository contains the complete set of KiCad EDA files (version 10.0) necessary to view, modify, and manufacture the printed circuit board (PCB).
Key Hardware Features
Based on the schematic and board layout, this board includes the following integrated components and capabilities:
- Microcontroller: Pico-compatible architecture featuring a built-in Temperature Sensor for internal environmental monitoring.
- Wireless Connectivity: Integrated Wi-Fi (802.11n) and Bluetooth (Classic & BLE), making it perfectly suited for IoT nodes, remote telemetry, and wireless control.
- Modern Interface: Upgraded with a USB Type-C connector for reliable data transfer and power delivery.
- Onboard Motion Tracking: Integrated ICM-20602 6-axis MEMS motion tracking device (accelerometer and gyroscope) for robotics, drones, or motion-sensitive applications.
- Power Regulation: Onboard AMS1117-3.3 Low Dropout (LDO) regulator providing a stable 3.3V supply across the board.
- PCB Specs: Designed as a 4-layer FR4 board for optimal signal integrity, thermal dissipation, and power routing.
Repository Structure
The project is entirely self-contained within the following native KiCad design files:
| File Name | Description |
|---|---|
TGC-Core-Pico-v2.kicad_pro | The main KiCad Project file. Open this file to load the entire workspace. |
TGC-Core-Pico-v2.kicad_sch | The Schematic file. Contains the logical connections, USB-C wiring, wireless modules, regulator, and IMU configuration. |
TGC-Core-Pico-v2.kicad_pcb | The PCB Layout file. Contains the physical 4-layer board routing, copper pours, and silkscreen definitions. |
image_78bedf.png | A visual render of the top board design. |
Getting Started
1. Viewing and Editing the Hardware
To view or modify the hardware design:
- Download and install KiCad EDA (Ensure you are using a modern version compatible with KiCad v10 files).
- Open the
TGC-Core-Pico-v2.kicad_profile. - Use the Schematic Editor to view component wiring or the PCB Editor to inspect the board stackup, wireless antenna keep-outs, and routing.
2. Manufacturing
You can generate standard manufacturing files (Gerbers, Drill files, BOM, and CPL/Pos files for PCBA) directly from the TGC-Core-Pico-v2.kicad_pcb file using KiCad's fabrication output tools.
License
This hardware design and its accompanying documentation are licensed under the GNU General Public License v3.0 (GPL-3.0-or-later).
Summary of your rights under GPLv3:
- You are free to use, study, share, and modify the material.
- If you distribute the work (or a derivative), you must license the whole work under GPLv3 as well (share-alike).
- You must provide source for distributed derivative works and include the GPLv3 license text and copyright notices.
For the full legal text, see the GNU licenses page: https://www.gnu.org/licenses/gpl-3.0.html
Note: To make the change complete, consider adding a LICENSE file containing the full GPLv3 text and an explicit copyright line (for example: "Copyright (c) 2026 ThatGuyCodes605"). I can add that file for you if you want.
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100nF | Capacitor_SMD:C_0805_2012Metric | C2, C3, C4, C5, C6, C7, C8, C10, C11, C16 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C12, C15 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C13, C14 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R5, R7 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C1, C9 |
| 2 | 27.4Ω | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | Conn_01x18 | Connector_PinHeader_2.54mm:PinHeader_1x18_P2.54mm_Vertical | J2, J3 |
| 1 | 220R | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 5.1K | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | ABM8-272-T3 | custom:XTAL_ABM8-272-T3 | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | DNF | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | LED | LED_SMD:LED_1210_3225Metric_Pad1.42x2.65mm_HandSolder | D1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1 |
| 1 | USB_C_Plug_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | P1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U3 |
Similar boards
- 2 layers110 × 52 mm

- 2 layers62 × 47 mm

- 4 layers279.5 × 97 mm

Alpha centauri pcb
jacob-w-gable/alpha_centauri
A split, ergonomic, mechanical keyboard with 40 keys, designed for typing speed and comfort.
224 parts1MIT - 4 layers51.1 × 40.7 mm

- 2 layers65.1 × 60 mm

- 2 layers100 × 60 mm

- 4 layers91 × 91 mm

- 4 layers45 × 76 mm

Questions
How big is the TGC Core Pico v2 PCB?
It measures 30.2 × 53.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the TGC Core Pico v2 use?
32 parts, built around the RP2040, W25Q128JVSIQ, AMS1117-3.3 and ABM8-272-T3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TGC Core Pico v2 KiCad files?
From the ThatGuyCodes605/TGC-Core-2040-v2 repository on GitHub, at the commit this page was made from: the board is TGC-Core-Pico-v2.kicad_pcb and its schematic TGC-Core-Pico-v2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TGC Core Pico v2 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).