2 layers30 × 20 mm
2 layers30 × 50 mm
Template
bobsrac/esp-progesp32 programmer - USBC to custom DF13-7 connector
- Size
- 30 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 34
- Pads
- 117
- Tracks, vias
- 131, 25
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 30 Jul 2024
- Updated
- 30 Jul 2024
Overview
Template is an open-source printed circuit board by bobsrac, from the bobsrac/esp-prog repository on GitHub, published under the MIT licence. It is a 2-layer board of 30 × 50 mm with 28 parts on 34 nets, routed with 131 tracks and 25 vias.
It is built around the ESP32-C6-WROOM-1-N8 and S-13A1C33-U5T1U3. Its parts include 6 capacitors, 6 resistors, 2 ICs and 2 connectors. It belongs with the ESP32 and RISC-V boards of this library.
Main components
2
ESP32-C6-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -99.2dBm 2.4GHz 20.5dBm 382mA 3V~3.6V 78mA ESP32-C6 On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
S-13A1C33-U5T1U3
SOT-89-5-40℃~+85℃@(Ta) 1 1A 3.3V 5.5V 60dB@(1kHz) Fixed Over Current Protection Positive SOT-89-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSABLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
target-template/README.mdesp-prog target-template
PCA design for a board with a ESP32-C6-WROOM-1, power-only USB-C connector, 3.3V LDO, programming connector for the esp-prog, and some testpoints.
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 |
| 4 | 5K1 | Resistor_SMD:R_0603_1608Metric | R1, R4, R5, R12 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C2, C7 |
| 2 | DNP | Capacitor_SMD:C_0603_1608Metric | C6, C8 |
| 1 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 100R, 1.5W | Resistor_SMD:R_0612_1632Metric | R11 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 47K5 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | ESP32-C6-WROOM-1 | HVAC:ESP32-C6-WROOM-1 | U1 |
| 1 | S-13A1C33-U5T1U3 | HVAC:SOT-89-5 | U3 |
| 1 | USB_C_Receptacle_PowerOnly_24P | HVAC:UJC-HP-G-5-SMT-TR | J1 |
| 1 | ~ | HVAC:Hirose_DF13-7P-1.25V | J2 |
Questions
How big is the Template PCB?
It measures 30 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Template use?
28 parts, built around the ESP32-C6-WROOM-1-N8 and S-13A1C33-U5T1U3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Template KiCad files?
From the bobsrac/esp-prog repository on GitHub, at the commit this page was made from: the board is target-template/template.kicad_pcb and its schematic esp-prog.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Template design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from bobsrac/esp-prog
1Similar boards
- 2 layers69.4 × 113 mm
- 2 layers64 × 50 mm
EverAliveSensor PCB
jfm92/everAliveSensor
Solar-powered BLE environmental sensor (temp, humidity, pressure) with a 50F supercapacitor — potentially infinite lifetime, 19-day dark autonomy. ESP32 + BME680. Experimental.
54 parts28 - 2 layers62.4 × 113.8 mm
- 2 layers99.9 × 40 mm
- 4 layers136.3 × 71.1 mm
- 4 layers114.9 × 129.9 mm
Tanmatsu
Nicolai-Electronics/tanmatsu-hardware
Hardware design of the Tanmatsu mainboard
372 parts9CERN-OHL-P-2.0 - 2 layers53 × 93 mm
- 2 layers100 × 60.5 mm
WizServoTester
Abean2k/WizServoTester
A servo controller PCB that can control up to 4 servos using onboard controls and a simple web app.
40 parts5MIT