

Esp prog
esp32 programmer - USBC to custom DF13-7 connector
- Size
- 30 × 20 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 34
- Pads
- 101
- Tracks, vias
- 179, 42
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 30 Jul 2024
- Updated
- 30 Jul 2024
Overview
Esp prog is an open-source printed circuit board by bobsrac, from the bobsrac/esp-prog repository on GitHub, published under the MIT licence. It is a 2-layer board of 30 × 20 mm with 20 parts on 34 nets, routed with 179 tracks and 42 vias.
It is built around the S-13A1C33-U5T1U3, BC846 and USB4110-GF-A. Its parts include 8 resistors, 6 capacitors, 2 ICs, 2 transistors and 2 connectors.
Main components
3S-13A1C33-U5T1U3
SOT-89-5-40℃~+85℃@(Ta) 1 1A 3.3V 5.5V 60dB@(1kHz) Fixed Over Current Protection Positive SOT-89-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSABLICVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsBC846
SOT-23-65℃~+150℃ 1 NPN 100mA 110 15nA 250mW 400mV 65V 6V 770MHz NPN SOT-23 Bipolar (BJT) ROHSNexperiaBipolar (BJT)USB4110-GF-A
SMD-40℃~+85℃ 1 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
README
target-template/README.mdesp-prog target-template
PCA design for a board with a ESP32-C6-WROOM-1, power-only USB-C connector, 3.3V LDO, programming connector for the esp-prog, and some testpoints.
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10K | Resistor_SMD:R_0603_1608Metric | R2, R3, R8 |
| 3 | 10u | Capacitor_SMD:C_0603_1608Metric | C1, C2, C7 |
| 2 | 5K1 | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | BC846 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 2 | DNP | Capacitor_SMD:C_0603_1608Metric | C6, C8 |
| 1 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 1K0 | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 22K1 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 47K5 | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | CP2102N-Axx-xQFN24 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U1 |
| 1 | S-13A1C33-U5T1U3 | HVAC:SOT-89-5 | U2 |
| 1 | USB4110-GF-A | HVAC:USB4110-GF-A | J2 |
| 1 | ~ | HVAC:Hirose_DF13-7P-1.25V | J1 |
More from bobsrac/esp-prog
1- 2 layers30 × 50 mm

Similar boards
- 2 layers73 × 139 mm

OpenRPNCalc
apoluekt/OpenRPNCalc
Open-source and open-hardware scientific RPN calculator
141 parts414CERN-OHL-P-2.0 - 4 layers151.7 × 39.8 mm

- 4 layers30 × 18 mm

- 6 layers29 × 33 mm

MINIREX G4
mathieupommery/MINIREX_G473
The following table demonstrates the estimated component costs based on Mouser volume pricing. The unit price of each component dynamically adapts to the total quantity required for the entire production batch (1, 100…
109 parts10 - 2 layers40 × 125 mm

- 4 layers87.2 × 22.6 mm

Sagittarius S1
GeneralSyb/Sagittarius-Headtracker
Project files for the Sagittarius S1 Prototype
45 parts6MIT - 6 layers22.7 × 19 mm

- 4 layers43 × 95 mm

Oe commutator controller
open-ephys/commutators
Active coaxial commutator for electrophysiology
92 parts5
Questions
How big is the Esp prog PCB?
It measures 30 × 20 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp prog use?
20 parts, built around the S-13A1C33-U5T1U3, BC846 and USB4110-GF-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp prog KiCad files?
From the bobsrac/esp-prog repository on GitHub, at the commit this page was made from: the board is esp-prog.kicad_pcb and its schematic esp-prog.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp prog design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).