

Mod synth adsr
Modular Synth PCBs and Firmware
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 31
- Pads
- 115
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 26 Jun 2019
- Updated
- 27 Sep 2019
Overview
Mod synth adsr is an open-source printed circuit board by bobbarnes1981, from the bobbarnes1981/mod_synth repository on GitHub. It is a 2-layer board with 36 parts on 31 nets.
It is built around the LM358, ICM7555N and BC547. Its parts include 10 resistors, 9 capacitors, 5 diodes, 3 transistors and 3 connectors. It belongs with the audio and music boards of this library.
Main components
3LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational AmplifierICM7555N
DIP-8-40℃~+85℃ 1 30uA 4.5V~15V Adjustable duty cycle oscillation DIP-8 555 Timers / Counters ROHSHGSEMITimers / CountersBC547
TO-92Bipolar (BJT)Jiangsu Changjing Electronics Technology (CJ)
README
README.mdmod_synth
Modular Synth
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10 |
| 7 | C_Small | Capacitor_THT:C_Disc_D9.0mm_W2.5mm_P5.00mm | C1, C2, C3, C6, C7, C8, C9 |
| 5 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5 |
| 3 | BC547 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2, Q3 |
| 2 | AudioJack2 | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J1, J2 |
| 2 | CP_Small | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C4, C5 |
| 1 | Attack | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical_CircularHoles | RV2 |
| 1 | Conn_02x08_Odd_Even | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J3 |
| 1 | Decay | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical_CircularHoles | RV4 |
| 1 | ICM7555 | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U2 |
| 1 | LM358 | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U1 |
| 1 | Release | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical_CircularHoles | RV1 |
| 1 | Sustain | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical_CircularHoles | RV3 |
More from bobbarnes1981/mod_synth
12- 2 layers141 × 109.2 mm

- 2 layers62.2 × 109.2 mm

- 2 layers62.2 × 109.2 mm

- 2 layers50.8 × 109.2 mm

- 2 layers81.9 × 109.2 mm

- 2 layers62.2 × 109.2 mm

- 2 layers41.9 × 109.2 mm

- 2 layers62.2 × 109.2 mm

- 2 layers62.2 × 109.2 mm

- 2 layers41.9 × 109.2 mm

- 2 layers38.1 × 109.2 mm

- 2 layers41.3 × 109.2 mm

Similar boards
- 2 layers98.4 × 93.8 mm

- 2 layers14.5 × 8.6 mm

Getting to blinky
ALeggeUp/getting-to-blinky
This work is licensed under the Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/ or send a letter to Creative Commons, PO Box…
17 partsCC-BY-SA-4.0 - 2 layers74.9 × 65 mm

- 2 layers54.9 × 85.9 mm

- 2 layers43.2 × 43.2 mm

Test1
PStinno/led-spinner-pcb
My first two layer PCB, spinning LED effect with no micro-controller or code.
27 partsCC-BY-SA-4.0 - 2 layers63 × 88 mm

Paragon
timbalicious/netrunner_paragon_pcb
Possibly functional PCB alt-art Paragon for the Netrunner LCG
128 parts - 2 layers80 × 110 mm

- 2 layers41.9 × 45.7 mm

Questions
What parts does the Mod synth adsr use?
36 parts, built around the LM358, ICM7555N and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mod synth adsr KiCad files?
From the bobbarnes1981/mod_synth repository on GitHub, at the commit this page was made from: the board is mod_synth_adsr/schematic/mod_synth_adsr.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mod synth adsr design in my own project?
Its repository states no licence, so its author keeps all rights: ask bobbarnes1981 before reusing the design.