

EinsteinCE
Tatung Einstein TC-01
- Size
- 170 × 170.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 174
- Nets
- 317
- Pads
- 1,209
- Tracks, vias
- 6,261, 418
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 1 Nov 2025
- Updated
- 25 Sep 2026
Overview
EinsteinCE is an open-source printed circuit board by Board-Folk, from the Board-Folk/Einstein-TC-01 repository on GitHub. It is a 2-layer board of 170 × 170.1 mm with 174 parts on 317 nets, routed with 6,261 tracks and 418 vias.
It is built around the 74LS384N, ATMEGA328-PU and 74LS245SC, with the 74LS373SC, BC517 and 74LS32SC among its other parts. Its parts include 45 resistors, 33 capacitors, 8 ICs, 6 transistors and 5 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1274LS384N
-- Digital Signal Processors (DSP/DSC) ROHSRochester Electronics, LLCDigital Signal Processors (DSP/DSC)ATMEGA328-PU
PDIP-28-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH PDIP-28 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)74LS245SC
-0℃~+70℃ 12ns@5V,45pF 15mA 24mA 4.75V~5.25V 74LS 8 Bidirectional Output enable Schmitt trigger Tri-State - Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers74LS373SC
--55℃~+125℃ 1 2.6mA 24mA 38ns@5V,150pF 4.75V~5.25V 74LS 8 Output enable Tri-State - Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversBC517
TO-9230V 1A NPN Silicon Darlington TransistoronsemiUncategorised74LS32SC
-- Logic Gates ROHSTexas InstrumentsLogic Gates74LS02PC
DIP-140℃~+70℃ 15ns@5V,15pF 2 2.7V 2V 4 4.75V~5.25V 400uA 500mV 74LS 800mV 8mA 8mA NOR Gate DIP-14 Logic Gates ROHSonsemiLogic Gates74LS04PC
PDIP-140℃~+70℃ 4.75V~5.25V 6 6.6mA 74LS PDIP-14 InvertersonsemiInverters74LS157PC
PDIP-160℃~+70℃ 4.75V~5.25V Single Supply PDIP-16 Signal Switches, Multiplexers, Decoders ROHSTexas InstrumentsSignal Switches, Multiplexers, DecodersBAT85
DO-341 Independent 200mA 2uA@25V 30V 5A 800mV@100mA DO-34 Schottky Diodes ROHSNexperiaSchottky Diodes74LS00SC
-0℃~+70℃ 15ns@5V,50pF 2 2.7V 2V 4 4.75V~5.25V 400uA 500mV 74LS 800mV 8mA NAND Gate - Logic Gates ROHSTexas InstrumentsLogic Gates74LS132P-E
DIP-14-20℃~+75℃ 2 2.7V 22ns@5V,15pF 4 4.75V~5.25V 400uA 500mV 74LS 8mA NAND Gate Schmitt trigger DIP-14 Logic Gates ROHSRenesas ElectronicsLogic Gates
README
README.mdEinstein TC-01
Repository for the 2025 Board Folk recreation of the main board of the Einstein TC-01 computer from Tatung.

This repository contains the Bill-of-Materials (iBOM), Gerbers and Kicad files for a remake of the Tatung Einstein TC-01 main board.
Projects are in Kicad 9.
Revisions
- Version 1.1 Initial Public Release
Modifications
- The 3 digit references have been abridged so they work in Kicad
- The factory modifications (cuts and bodge wires) for the reset circuit have been included on the board
- Bodge capacitor C70 included on board for printer port strobe delay
- A solder jumper next to socket M16 provides the common modification of 5V power to pin 6 on the video output socket as you'd have on a BBC Micro
- Some small silkscreen improvements have been made to avoid confusion
Build Notes
- Power connectors are 5.08mm pin headers
- M6 keyboard pin header is 2.5mm not 2.54mm pitch
- Corner line indicator on transistor footprints signifies flat front side direction, NOT pin 1
- BC307 can be subtituted for BC557
- BC308 can be subtituted for BC558
- Reset switch is the same as the one found on the TRS-80 Model I
- The ADC0844 alternative footprint is a µPD7002 which requires C13 populating with 33nF (untested)
- The value/range of L101 "Chrominance Rejector" is at this time unknown
Archive
Currently contains the original copy of the v1.1 main board, which hasn't changed. The updated main Kicad folder now contains additional symbols and footprints only.
Credit
Mainboard PCB layout by Rob Taylor @peepouk. Schematics recreated by Ian Cudlip @grandoldian.
Expansions
TMSAdapterTC01
Adapter board to allow the use of a TMS9929 chip on the Tatung Einstein TC-01.
EinsteinTC01PS2
Arduino Nano based PS/2 Keyboard Adapter for the TC-01.
EinsteinTC01PS2Mini
ATMEGA328 based PS/2 Keyboard Adapter for the TC-01.
V9958AdapterTC01
Yamaha V9958/V9938 Adapter with 192K Video RAM for the TC-01.
TC02Mini
Simple non-replica remake of the TC-02 80 column adapter for the TC01.
Joystick Adapters
TC01AtariJoystick
Dual Atari Digital Joystick Adapter.
Withdrawn Tandy Joystick Adapter
It turns out the y axis on Tandy joysticks is connected the other way round, which means it will require circuitry to make it work for Einstein games. Trying to think of something clever for that.
Remixes
Einstein CE
Simplified Einstein with bits removed to fit on a small board. See description in folder.
Coming Soon
- Another, comprehensive remix with expansions
Links
10.6875MHz HC-49U Crystal
5 pin "Domino" DIN Socket for Serial Port
Modifyable bracket for holding standard Volume Pot
Thanks
- The rest of the Board Folk Team
Legal
As the product of this project is a replica of a proprietary product, the the author makes no claim of copyright to the schematics nor PCB layouts and releases these into the public domain, solely for the purposes of study and historical preservation.
You are free to produce PCBs based on this project's designs at your own risk and without limitation, for your own use or for sale and/or repair at a reasonable price. Attribution is appreciated. The authors are not obliged to provide support of any kind.
Under no circumstances will the authors be held responsible or liable in any way for losses, damages or costs resulting from the use of the information and/or resources of this project.
The resources are provided "as-is" without warranty of any kind, either expressed or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
Parts
174| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 100nF | Einstein:C_Disc_5.08mm | C27, C28, C30, C31, C32, C33, C34, C35, C36, C37, C38, C40, C41, C42, C44, C121 +3 |
| 8 | MB8118 | Einstein:DIP-16_W7.62mm | IC151, IC152, IC153, IC154, IC155, IC156, IC157, IC158 |
| 7 | 1K | Einstein:Resistor 10.16mm | R81, R82, R83, R123, R124, R127, R128 |
| 7 | 2K2 | Einstein:Resistor 10.16mm | R1, R2, R3, R4, R7, R40, R50 |
| 7 | Seed | harry:Seed6mm | G10, G11, G12, G13, G15, G16, G17 |
| 6 | 220R | Einstein:Resistor 10.16mm | R27, R28, R30, R31, R35, R53 |
| 6 | Egg | harry:Egg5mm | G3, G4, G5, G6, G18, G19 |
| 5 | 470R | Einstein:Resistor 10.16mm | R51, R121, R122, R125, R126 |
| 4 | 10K | Einstein:Resistor 10.16mm | R54, R55, R84, R87 |
| 4 | 74LS244 | Einstein:DIP-20_W7.62mm | I2, I3, I5, I36 |
| 4 | BC517 | Einstein:Transistor - Box 1 (Leg Rear) | Q121, Q122, Q123, Q124 |
| 4 | MountingHole | Einstein:Hole3.81_Pad_Via | HA1, HA2, HA3, HA4 |
| 3 | 4K7 | Einstein:Resistor 10.16mm | R8, R10, R11 |
| 3 | 74LS32 | Einstein:DIP-14_W7.62mm | I17, I20, I32 |
| 2 | 20pF | Einstein:C_Disc_2.54mm | C122, C123 |
| 2 | 22K | Einstein:Resistor 10.16mm | R85, R86 |
| 2 | 2764/128 | Einstein:DIP-28_W15.24mm | I23, I24 |
| 2 | 330R | Einstein:Resistor 10.16mm | R52, R90 |
| 2 | 390R | Einstein:Resistor 10.16mm | R5, R6 |
| 2 | 74LS02 | Einstein:DIP-14_W7.62mm | I28, I34 |
| 2 | 74LS04 | Einstein:DIP-14_W7.62mm | I21, I47 |
| 2 | 74LS138 | Einstein:DIP-16_W7.62mm | I26, I27 |
| 2 | 74LS157 | Einstein:DIP-16_W7.62mm | I6, I7 |
| 2 | 74LS38 | Einstein:DIP-14_W7.62mm | I44, I45 |
| 2 | 820R | Einstein:Resistor 10.16mm | R32, R33 |
| 2 | BAT85 | Einstein:Diode 10.16mm | D4, D5 |
| 2 | TMS4464 | Einstein:DIP-18_W7.62mm | I60, I61 |
| 1 | 10.7386MHz | Einstein:Crystal | X1 |
| 1 | 100R | Einstein:Resistor 10.16mm | R89 |
| 1 | 100pF | Einstein:C_Disc_5.08mm | C2 |
| 1 | 100uF | Einstein:Elec_2.5mm - Box | C82 |
| 1 | 100uF 25V | Einstein:Elec_5.08mm - Box | C20 |
| 1 | 10uH | Einstein:Resistor 12.70mm | L81 |
| 1 | 16MHz | Einstein:Crystal | X121 |
| 1 | 1K | Einstein:Pot Straight | R88 |
| 1 | 1K2 | Einstein:Resistor 10.16mm | R34 |
| 1 | 1nF | Einstein:C_Disc_5.08mm | C10 |
| 1 | 22R | Einstein:Resistor 10.16mm | R36 |
| 1 | 2N3906 | Einstein:Transistor - Box 1 (Alt 1+3) No corner marking | Q4 |
| 1 | 33pF | Einstein:C_Disc_2.54mm | C7 |
| 1 | 33pF | Einstein:C_Disc_5.08mm | C11 |
| 1 | 470K | Einstein:Resistor 10.16mm | R91 |
| 1 | 470uF 16V | Einstein:Elec_5.08mm - Big Box | C23 |
| 1 | 47nF | Einstein:C_Disc_5.08mm | C81 |
| 1 | 47uF 16V | Einstein:Elec_5.08mm - Box | C25 |
| 1 | 47uF TANT | Einstein:Elec_2.5mm - Box | C43 |
| 1 | 5-40pF | Einstein:CVN6500 | C8 |
| 1 | 5V | Einstein:Power Header 3.96mm | M60 |
| 1 | 5V DC IN | Einstein:BarrelJack_Horizontal | M7 |
| 1 | 74LS00 | Einstein:DIP-14_W7.62mm | I22 |
| 1 | 74LS08 | Einstein:DIP-14_W7.62mm | I18 |
| 1 | 74LS132 | Einstein:DIP-14_W7.62mm | I52 |
| 1 | 74LS245 | Einstein:DIP-20_W7.62mm | I4 |
| 1 | 74LS293 | Einstein:DIP-14_W7.62mm | I48 |
| 1 | 74LS373 | Einstein:DIP-20_W7.62mm | I43 |
| 1 | 74LS74 | Einstein:DIP-14_W7.62mm | I25 |
| 1 | 8MHz | Einstein:Crystal | X2 |
| 1 | ATMEGA328 | Einstein:DIP-28_W7.62mm | I121 |
| 1 | AY-3-8910 | Einstein:DIP-40_W15.24mm | I30 |
| 1 | BC549 | Einstein:Transistor - Box 1 (Leg Rear) | Q81 |
| 1 | Board Folk Logo | Einstein:BF8 | G2 |
| 1 | COMPOSITE | Einstein:RCA | M81 |
| 1 | CTRL | Einstein:LED_D3.0mm | D121 |
| 1 | DRIVE A POWER | Einstein:M10 PinHeader_1x04_P2.54mm | M8 |
| 1 | DRIVE B POWER | Einstein:M10 PinHeader_1x04_P2.54mm | M9 |
| 1 | Duck Rear | harry:Duck166mm | G14 |
| 1 | Einstein CE Logo | harry:EinsteinCELogo28mm | G1 |
| 1 | GRPH | Einstein:LED_D3.0mm | D124 |
| 1 | Harry | harry:Harry8mm | G7 |
| 1 | Hen | harry:Hen_Left_8mm | G9 |
| 1 | Hen | harry:Hen8mm | G8 |
| 1 | INTERNAL | Einstein:PinHeader_2x17_P2.54mm | M5 |
| 1 | KEYBOARD | Einstein:Keyboard | M6 |
| 1 | LED ASSY | Einstein:M12 PinHeader_1x03_P2.54mm | M12 |
| 1 | LOGO | harry:Ladder | G20 |
| 1 | MT8816 | Einstein:DIP-40_W15.24mm | I122 |
| 1 | NF | Einstein:C_Disc_5.08mm | C1 |
| 1 | PS/2 | Einstein:Connector_Mini-DIN_Female_6Pin_2rows | M121 |
| 1 | RESET | Einstein:LED_D3.0mm | D122 |
| 1 | ROM | Einstein:M18 PinHeader_1x03_P2.54mm | M18 |
The 166 most common of 174 parts.
More from Board-Folk/Einstein-TC-01
7- 2 layers299.7 × 320 mm

- 2 layers199.6 × 74.2 mm

- 2 layers131.1 × 91.4 mm

- 2 layers77.9 × 86.5 mm

- 2 layers55.9 × 88.9 mm

- 2 layers69.8 × 60.9 mm

- 2 layers63.8 × 53.3 mm

Similar boards
- 2 layers364 × 203 mm

- 2 layers379.1 × 273.4 mm

NE Delta
frubem/NE_Delta_Schematics
Forked from https://codeberg.org/hkzlab/NE_Delta_Schematics
185 parts - 2 layers365.1 × 203.2 mm

DIAG
Nakazoto/CenturionComputer
This is just a simple backup of all the files related to the Centurion that I have stored on my HD. The Wiki itself has far more in-depth information about the Centurion and it's individual cards.
150 parts172 - 4 layers304.8 × 215.9 mm

64 256KB SYSTEM BOARD
kev-ju/PC-Retro-MTM
Modern KiCad version of the IBM 5150 system board originally created by MTM Scientific, Inc.
197 parts4 - 2 layers407 × 184 mm

TRS-80-Model I Jap50-E1
RetroStack/TRS-80-Model-I-Jap50-E1
Hardware Replica of the TRS-80 Model I Revision HE11E011550
253 parts1MIT - 2 layers320.7 × 155.8 mm

- 2 layers426 × 307 mm

I7000
felipesanches/Itautec_I7000_KICAD
Esquemáticos do computador Itautec I-7000 G desenhados a partir de inspeção do circuito das PCBs
115 parts - 4 layers298.9 × 270 mm

Dino v0 0 2
robertrico/dino-homebrew
A perfboard with the bus edge and the slot decode every DINO card repeats. Plug it into any of J1-J8 on the Rev 1.0 mainboard, pick the slot with one shunt, bodge the card on the grid.
239 parts
Questions
How big is the EinsteinCE PCB?
It measures 170 × 170.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the EinsteinCE use?
174 parts, built around the 74LS384N, ATMEGA328-PU, 74LS245SC and 74LS373SC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EinsteinCE KiCad files?
From the Board-Folk/Einstein-TC-01 repository on GitHub, at the commit this page was made from: the board is Remix/EinsteinCE/Kicad/EinsteinCE.kicad_pcb and its schematic Archive/MainBoard/v1.1/Kicad/EinsteinTC01.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the EinsteinCE design in my own project?
Its repository states no licence, so its author keeps all rights: ask Board-Folk before reusing the design.