Skip to the content
2 layers51.4 × 31.8 mmVM4, the printed circuit board in 3D

JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.

Size
51.4 × 31.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
45
Nets
30
Pads
106
Tracks, vias
321, 30
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
16 Apr 2026
Updated
1 Nov 2026

Overview

VM4 is an open-source printed circuit board by blue-wind-25, from the blue-wind-25/JxMake repository on GitHub. It is a 2-layer board of 51.4 × 31.8 mm with 45 parts on 30 nets, routed with 321 tracks and 30 vias.

It is built around the TLV2372IP, AP2112K-3.3 and SS14, with the BAT85 among its other parts. Its parts include 10 capacitors, 7 resistors, 4 diodes, 3 connectors and 2 ICs.

Main components

4

README

README.md

JxMake

Language: Java Language: C/C++ Primary_License: LGPL v3+

JxMake is primarily licensed under LGPL v3+.

Copies of the licenses for third-party libraries/components included in this repository are located in the 3rd_party_library_licenses directory. Please refer to individual sub-directories of the libraries/components for specific author credits and copyright headers.


JxMake is a Java-based cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.

Additionally, JxMake supports several features not typically found in other console-based build systems, including a simple built-in GUI, a serial console, a serial plotter, and integrated programmers for some commonly used MCUs. The JxMake repository also includes hardware schematics and PCB designs ranging from simple to moderately complex, covering generic GPIO, basic programmers, and various tools.

Building JxMake requires Java SDK 8 or later (note that Java SDK 8 is an LTS version).

This project is mirrored on both SourceForge and GitHub:


Please refer to the JxMake usage page (run it with the -h or --browse-docs option) for how to use the program.

Please refer to docs/*.txt, test/*.jxm, and test/src/*/JxMakeFile for the scripting language syntax and examples.


All preprocessed *.java files generated from their corresponding *.java.in files (and optionally some *.java.inc files) are preprocessed using PCPP (3rd_party/tools/pcpp/pcmd.py) and GNU sed.

Currently, JxMake's loadable libraries (build scripts) are primarily focused on embedded systems development. Future updates will enhance support for building desktop applications. However, please note that these libraries are quite basic, so you may prefer to create custom libraries tailored to your projects.


If you like this software (or part of this software), please consider donating to:
    PayPal: aloysius.indrayanto@gmail.com
to support the software development.


Parts

45
QtyValueFootprintReferences
8, , , , , , ,
3100nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC3, C6, C10
310uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC7, C8, C9
3SS14Diode_SMD:D_SMAD1, D2, D3
2100RResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR6, R7
21uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC4, C5
22.2nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2
222MResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR4, R5
250kPotentiometer_THT:Potentiometer_Bourns_3296W_VerticalRV1, RV2
2Conn_01x01Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_VerticalJVSW1, JVSW2
2Conn_01x12Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_VerticalJP_PM1, JP_PM2
10RResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderRb1
110kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2
1180kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3
14M7Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1
1AP2112K-3.3Package_TO_SOT_SMD:SOT-23-5U2
1AVR-ISP6Connector_IDC:IDC-Header_2x03_P2.54mm_HorizontalJ2
1BAT85Diode_SMD:D_SMAD4
1BypassJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP2
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP_PM3
1Connect_3V3Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP1
1InputConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_HorizontalJ1
1SSD1306 - 128x64Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ3
1SW_SPSTButton_Switch_THT:SW_PUSH_1P1T_6x3.5mm_H4.3_APEM_MJTP1243SW1
1TLV2372Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU1

More from blue-wind-25/JxMake

12
  • 2 layers195.6 × 113 mmHVA, the printed circuit board in 3D

    HVA

    blue-wind-25/JxMake

    JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.

    228 parts
  • 2 layers130.2 × 101 mmASV, the printed circuit board in 3D

    ASV

    blue-wind-25/JxMake

    JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.

    184 parts
  • 2 layers167.6 × 134.6 mmVMP, the printed circuit board in 3D

    VMP

    blue-wind-25/JxMake

    JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.

    170 parts
  • 2 layers129.5 × 92.7 mmHVA, the printed circuit board in 3D

    HVA

    blue-wind-25/JxMake

    JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.

    108 parts
  • 2 layers77.5 × 79.6 mmUSH, the printed circuit board in 3D

    USH

    blue-wind-25/JxMake

    JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.

    104 parts
  • 2 layers132.1 × 141 mmVMP, the printed circuit board in 3D

    VMP

    blue-wind-25/JxMake

    JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.

    101 parts
  • 2 layers238.8 × 106.7 mmVMP, the printed circuit board in 3D

    VMP

    blue-wind-25/JxMake

    JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.

    94 parts
  • 2 layers94 × 75.7 mmPSC, the printed circuit board in 3D

    PSC

    blue-wind-25/JxMake

    JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.

    79 parts
  • 2 layers66 × 61.1 mmUSH, the printed circuit board in 3D

    USH

    blue-wind-25/JxMake

    JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.

    76 parts
  • 2 layers87.6 × 39.4 mmABC, the printed circuit board in 3D

    ABC

    blue-wind-25/JxMake

    JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.

    53 parts
  • 2 layers76.2 × 61 mmUGM, the printed circuit board in 3D

    UGM

    blue-wind-25/JxMake

    JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.

    42 parts
  • 2 layers62.2 × 41.9 mmICS, the printed circuit board in 3D

    ICS

    blue-wind-25/JxMake

    JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.

    35 parts

Similar boards

  • 4 layers99.8 × 115 mmIgnitionController, the printed circuit board in 3D

    IgnitionController

    MiroslavMitrovic/IgnitionController_STM32

    Ignition controller implementation for 4T Single Cylinder/V-Twin motorcycle.

    226 partsGPL-3.0
  • 2 layers101.6 × 53.3 mmBatteryAnalyzer MkII, the printed circuit board in 3D

    BatteryAnalyzer MkII

    Moragor/BatteryAnalyzer_MkII

    Updated Version of the battery analyzer, now with constant current

    25 parts12MIT
  • 2 layers105.5 × 86 mmECE302 Lab8, the printed circuit board in 3D

    ECE302 Lab8

    alexcjang/20V-5V-Buck-Converter

    41 parts
  • 2 layers52 × 48 mmSTM32-Based Programmable Waveform Generator, the printed circuit board in 3D

    STM32-Based Programmable Waveform Generator

    devjamescollier/STM-32_Based_Waveform_Generator

    USB-powered programmable function generator built around an STM32C031K6T6 microcontroller and MCP4901 DAC. Generates clean sine, triangle, and square waveforms with amplitude control via potentiometer, mode selection…

    48 partsCERN-OHL-P-2.0
  • 2 layers30 × 30 mmSteering Sensor (1), the printed circuit board in 3D

    Steering Sensor (1)

    dnz1666/impedance-buffer-pcb

    Analog circuit design (impedance buffer + LP filter) – KiCad schematic & PCB layout for a student EV project at RWTH Aachen

    14 parts
  • 4 layers160 × 70 mmAfternoonBlend, the printed circuit board in 3D

    AfternoonBlend

    dumaiss/PercolatorLabs

    Repo for all the Coffee Series pBITz multimedia cards

    81 parts
  • 2 layers53.3 × 99.8 mmAdapater a, the printed circuit board in 3D

    Adapater a

    jensboe/Modellbahn

    columns 1 block:selfmade block:base columns 1 nucleo adapter["adapter board A"] end space expansion1["expansion board A 1"] space expansionn["expansion board A n"] space expansionb["expansion board B"] adapter…

    58 parts
  • 4 layers70 × 30 mmHarm meas using os, the printed circuit board in 3D

    Harm meas using os

    jkbkwcn/harm_meas_using_os

    An electronic circuit project designed to measure mains current harmonics with amplitudes below one Least Significant Bit (LSB) of an Analog-to-Digital Converter.

    67 parts

Questions

How big is the VM4 PCB?

It measures 51.4 × 31.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the VM4 use?

45 parts, built around the TLV2372IP, AP2112K-3.3, SS14 and BAT85. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the VM4 KiCad files?

From the blue-wind-25/JxMake repository on GitHub, at the commit this page was made from: the board is hardware/Tools/KiCad8/4Digit_Voltmeter_II/VM4.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the VM4 design in my own project?

Its repository states no licence, so its author keeps all rights: ask blue-wind-25 before reusing the design.