

Stm32l151 breakout
Blake's embedded projects
- Size
- 43.2 × 45.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 56
- Pads
- 137
- Tracks, vias
- 468, 52
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 16 Feb 2019
- Updated
- 13 Jun 2023
Overview
Stm32l151 breakout is an open-source printed circuit board by blakesmith, from the blakesmith/embedded repository on GitHub. It is a 2-layer board of 43.2 × 45.7 mm with 15 parts on 56 nets, routed with 468 tracks and 52 vias.
It is built around the STM32L151CCT6 and LD1117-3.3. Its parts include 4 connectors, 2 ICs, 1 resistor and 1 diode. It belongs with the interfaces and adapters boards and the STM32 boards of this library.
Main components
2STM32L151CCT6
LQFP-48(7x7)-40℃~+85℃ 1.8V~3.6V 12bit 12bit 256KB 32 Bit 32KB 32MHz 37 8KB ARM Cortex-M3 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)LD1117-3.3
SOT-223-40℃~+125℃@(Tj) 0.003%Vout 1 1.3V@(1A) 10mA 18V 1A 3.3V 60dB@(120Hz) Fixed Over Current Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSUMWVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x24_Male | Pin_Headers:Pin_Header_Straight_2x12_Pitch2.54mm | J2, J4 |
| 1 | 300 | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | C1 | Capacitors_SMD:C_0805_HandSoldering | 0.1uF1 |
| 1 | C2 | Capacitors_SMD:C_0805_HandSoldering | 0.1uF2 |
| 1 | C3 | Capacitors_SMD:C_0805_HandSoldering | 0.1uF3 |
| 1 | C4 | Capacitors_SMD:C_0805_HandSoldering | 0.1uF4 |
| 1 | C5 | Capacitors_SMD:C_0805_HandSoldering | 0.1uF5 |
| 1 | C6 | Capacitors_SMD:C_0805_HandSoldering | 10uF1 |
| 1 | Conn_ARM_JTAG_SWD_10 | Pin_Headers:Pin_Header_Straight_2x05_Pitch1.27mm | J3 |
| 1 | LD1117-3.3 | TO_SOT_Packages_SMD:SOT-223 | U1 |
| 1 | LED | LEDs:LED_0805_HandSoldering | D1 |
| 1 | STM32L151C | Housings_QFP:LQFP-48_7x7mm_Pitch0.5mm | U2 |
| 1 | USB_B_Micro | fci:USB-MICRO-B-FCI-10118192 | J1 |
The 14 most common of 15 parts.
More from blakesmith/embedded
9- 2 layers275 × 103 mm

- 2 layers22.9 × 81.3 mm

- 2 layers91.4 × 91.4 mm

- 2 layers20.8 × 61 mm

- 2 layers31 × 38 mm

- 2 layers27.9 × 37.3 mm

- 2 layers45.7 × 58.4 mm

- 2 layers61 × 21.6 mm

- 2 layers44.4 × 21.6 mm

Similar boards
- 2 layers235 × 119.4 mm

Siemens Sinumerik840C Maschinensteuertafel Adaptor
PedPEx/Siemens-LinuxCNC-Interface
Siemens Sinumerik840C Maschinensteuertafel Adaptor for LinuxCNC
104 parts5GPL-3.0 - 4 layers70.8 × 108 mm

- 2 layers

- 2 layers42.4 × 42.4 mm

Nema17 driver
fremsoft/impara-giocando-2
Seconda stagione di impara giocando, laboratorio di robotica e meccatronica
48 partsGPL-3.0 - 2 layers44.3 × 28.7 mm

Lin bus adapter esp32
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915 - 2 layers100 × 100 mm

- 2 layers75 × 120 mm

- 2 layers19 × 76 mm

Sub
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
15 parts3kApache-2.0
Questions
How big is the Stm32l151 breakout PCB?
It measures 43.2 × 45.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Stm32l151 breakout use?
15 parts, built around the STM32L151CCT6 and LD1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Stm32l151 breakout KiCad files?
From the blakesmith/embedded repository on GitHub, at the commit this page was made from: the board is hardware/breakout_boards/stm32l151_breakout/stm32l151_breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Stm32l151 breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask blakesmith before reusing the design.