

CorboIron
Software for solder iron using weller RT-tips
- Size
- 78.7 × 99.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 101
- Nets
- 81
- Pads
- 313
- Tracks, vias
- 1,214, 389
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 3 Oct 2015
- Updated
- 9 Sep 2018
Overview
CorboIron is an open-source printed circuit board by bjohan, from the bjohan/CorboIron repository on GitHub. It is a 2-layer board of 78.7 × 99.1 mm with 101 parts on 81 nets, routed with 1,214 tracks and 389 vias.
It is built around the LM324. Its parts include 51 resistors, 14 diodes, 11 connectors, 10 capacitors and 5 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdCorboIron
Soldering station with one pencil holder on bench.
Soldering station with both pencil holders hanging.
Side view
Front view
Parts
101| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100K | Resistors_SMD:R_0805 | R1, R5, R9, R13, R17, R18, R19, R20, R21, R22, R23 |
| 10 | D | Diodes_SMD:SOD-123 | D1, D3, D4, D5, D7, D9, D11, D12, D13, D14 |
| 9 | 4K7 | Resistors_SMD:R_0805 | R7, R11, R15, R34, R35, R40, R41, R46, R47 |
| 4 | 150K | Resistors_SMD:R_0805 | R26, R32, R38, R44 |
| 4 | 1K | Resistors_SMD:R_0805 | R4, R8, R12, R16 |
| 4 | 1uF | Discret:CV3-30PF | C1, C4, C5, C6 |
| 4 | 22K | Resistors_SMD:R_0805 | R24, R30, R36, R42 |
| 4 | 27K | Resistors_SMD:R_0805 | R48, R49, R50, R51 |
| 4 | 2K7 | Resistors_SMD:R_0805 | R27, R33, R39, R45 |
| 4 | 5K | SMD_Packages:POT_SMD | RV1, RV3, RV5, RV7 |
| 4 | 680K | Resistors_SMD:R_0805 | R2, R6, R10, R14 |
| 4 | 6K8 | Resistors_SMD:R_0805 | R25, R31, R37, R43 |
| 4 | CONN_01X03 | Connect:bornier3 | P1, P2, P3, P5 |
| 4 | IPS6041RPBF | SMD_Packages:DPAK5 | Q1, Q2, Q3, Q4 |
| 4 | LED | LEDs:LED_1206 | D2, D6, D8, D10 |
| 4 | LM324 | SMD_Packages:SO14N | U1, U2, U3, U4 |
| 3 | 4k7 | Resistors_SMD:R_0805 | R3, R28, R29 |
| 3 | CONN_01X04 | Pin_Headers:Pin_Header_Straight_1x04 | P6, P10, P11 |
| 2 | 100u | Discret:CV3-30PF | C7, C10 |
| 2 | 10n | Capacitors_SMD:C_1206_HandSoldering | C8, C9 |
| 2 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03 | P8, P9 |
| 2 | Jumper_NO_Small | Pin_Headers:Pin_Header_Straight_1x02 | JP1, JP2 |
| 1 | 220u | Discret:CV3-30PF | C3 |
| 1 | 4u7 | Discret:CV3-30PF | C2 |
| 1 | 7805 | TO_SOT_Packages_THT:TO-220_Neutral123_Vertical | U14 |
| 1 | Arduino_nano | Housings_DIP:DIP-32_W15.24mm_LongPads | P4 |
| 1 | CONN_01X02 | Connect:bornier2 | P7 |
More from bjohan/CorboIron
1- 2 layers158.8 × 99.1 mm

Similar boards
- 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 2 layers36.8 × 34.7 mm

Tinylab proto1
espotek-org/Labrador
EspoTek Labrador is a USB device that transforms your PC or smartphone into a fully-featured electronics lab. This repo holds all of the source code!
79 parts1.2k - 4 layers82.6 × 82.5 mm

- 2 layers231.1 × 106.7 mm

- 4 layers82.6 × 82.6 mm

- 4 layers72.4 × 95.3 mm

DingoPDM
corygrant/dingoPDM
Hardware - dingoPDM is an open source, affordable automotive PDM (Power Distribution Module). Pre-assembled and tested units are available or the design can be used to build a DIY version.
156 parts128MIT - 2 layers191.5 × 76 mm

Pcb project
CrashOverride85/zc95
4 channel EStim box inspired by the mk312bt, with Lua scripting support
337 parts117GPL-3.0 - 4 layers292.1 × 88.3 mm

Snark barker mca
schlae/snark-barker-mca
A Sound Blaster compatible sound card for Micro Channel bus computers
177 parts69
Questions
How big is the CorboIron PCB?
It measures 78.7 × 99.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CorboIron use?
101 parts, built around the LM324. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CorboIron KiCad files?
From the bjohan/CorboIron repository on GitHub, at the commit this page was made from: the board is hw/CorboIron.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CorboIron design in my own project?
Its repository states no licence, so its author keeps all rights: ask bjohan before reusing the design.