2 layers68.6 × 53.3 mm
StupidDogFocuserPCB
jeff-voight/StupidDogFocuser
As open-source electronic telescope focuser
21 parts2GPL-3.0
2 layers111.8 × 68.6 mm
KICAD project for a simple temperature display on a 4 7-segment display
- Size
- 111.8 × 68.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 20
- Pads
- 84
- Tracks, vias
- 150, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 24 Nov 2018
- Updated
- 24 Nov 2018
Overview
As1108 is an open-source printed circuit board by bit4man, from the bit4man/temperature-display repository on GitHub. It is a 2-layer board of 111.8 × 68.6 mm with 10 parts on 20 nets, routed with 150 tracks and 0 vias.
It is built around the ARDUINO UNO R3 and DHT11. Its parts include 4 ICs, 3 capacitors, 1 resistor and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nF | Capacitors_THT:CP_Radial_D5.0mm_P2.50mm | C2, C3 |
| 1 | 10K | Resistors_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R1 |
| 1 | 330nF | Capacitors_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | Arduino_UNO_R3 | Modules:Arduino_Nano_WithMountingHoles | A1 |
| 1 | CA56-12CGKWA | Displays_7-Segment:Cx56-12 | U4 |
| 1 | DHT11 | Socket_Strips:Socket_Strip_Straight_1x04_Pitch2.00mm | U1 |
| 1 | Jack-DC | Connectors:BARREL_JACK | J1 |
| 1 | LM7805_TO220 | TO_SOT_Packages_THT:TO-220_Vertical | U2 |
| 1 | as1108 | Housings_DIP:DIP-20_W7.62mm_Socket | U3 |
Questions
How big is the As1108 PCB?
It measures 111.8 × 68.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the As1108 use?
10 parts, built around the ARDUINO UNO R3 and DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the As1108 KiCad files?
From the bit4man/temperature-display repository on GitHub, at the commit this page was made from: the board is as1108.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the As1108 design in my own project?
Its repository states no licence, so its author keeps all rights: ask bit4man before reusing the design.
Similar boards
- 2 layers98.1 × 101.3 mm
Climatecontrolpcb
Sharan21-cmd/climate-control-pcb-design
A compact and efficient Climate Control PCB designed for monitoring and regulating temperature and humidity using embedded electronics.
16 parts1 - 2 layers
- 2 layers248 × 122.6 mm
Project 1
rajsandeep2410-maker/NRF24L01-Wireless-Communication-PCB
Designed a wireless communication system using NRF24L01 modules and Arduino, with a custom PCB layout in KiCad including transmitter and receiver sections.
16 parts - 2 layers79.2 × 76.9 mm
Temper
garvit07122005-art/electronics-projects
This repository contains multiple Arduino-based projects:
5 parts - 2 layers68.8 × 53.6 mm
Relatively Universal ROM Programmer
AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.
149 parts257GPL-3.0 - 2 layers69.1 × 53.8 mm
Motor controller
AlanFord/self-balancing-stick
Dual Axis Reaction Wheel Inverted Pendulum
25 parts79MIT - 2 layers68.6 × 53.3 mm
Protogasm Board V2
Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.
14 parts67MIT