Skip to the content
2 layers79.2 × 76.9 mmTemper, the printed circuit board in 3D

This repository contains multiple Arduino-based projects:

Size
79.2 × 76.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
5
Nets
33
Pads
45
Tracks, vias
42, 0
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
17 Mar 2026
Updated
27 Mar 2026

Overview

Temper is an open-source printed circuit board by garvit07122005-art, from the garvit07122005-art/electronics-projects repository on GitHub. It is a 2-layer board of 79.2 × 76.9 mm with 5 parts on 33 nets, routed with 42 tracks and 0 vias.

It is built around the ARDUINO UNO R3 and DHT11. Its parts include 1 IC and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

This repository contains multiple Arduino-based projects:

Projects:

  1. DC Voltmeter
  2. Temperature Monitoring System and its modified version
  3. Metal Detector
  4. Smart Energy Meter (In Progress)

Tools Used:

  • Arduino
  • Embedded C
  • KiCad (PCB Design)

Basic description of every project :

Smart Energy Meter (Arduino + KiCad

Designed and developed a smart energy meter using Arduino to measure voltage, current, and power consumption. Interfaced sensors for real-time monitoring and displayed output on Serial Monitor. Designed PCB using KiCad for circuit implementation. Project currently under development.

DC Voltmeter

Developed a DC voltmeter using Arduino and a voltage divider circuit to measure input voltage. Converted analog signals into digital values using ADC. Displayed output on LCD/Serial Monitor. Achieved stable and accurate readings.

Temperature Monitoring System

Built a temperature monitoring system using LM35 sensor and Arduino. Measured real-time temperature and displayed it on LCD/Serial Monitor. Implemented analog signal processing for accurate readings. System responds effectively to temperature variations.

Modified Temperature Monitoring System

Modified the previous temperature system bt adding some components , added relay module for automatic switching when the real time temperature hits above the threshold temperature set by the potentiometer . added a external fan to make the temp of the surrounding cool and also added the hystresis control to avoid the flickering of switching neear around the threshold temparature

Metal Detector

Designed a metal detector using a coil-based sensing mechanism and Arduino. Detected changes in magnetic field caused by nearby metal objects. Triggered a buzzer as an alert on detection. Demonstrated basic electromagnetic sensing principles.

Parts

5
QtyValueFootprintReferences
1Arduino_UNO_R3Module:Arduino_UNO_R3A1
1BuzzerBuzzer_Beeper:Buzzer_12x9.5RM7.6BZ1
1Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1
1DHT11Sensor:Aosong_DHT11_5.5x12.0_P2.54mmU1
1R_Potentiometer_USPotentiometer_THT:Potentiometer_Bourns_3386H_HorizontalRV1

More from garvit07122005-art/electronics-projects

4
  • 2 layers105.5 × 78 mmEnergy meter arduino, the printed circuit board in 3D

    Energy meter arduino

    garvit07122005-art/electronics-projects

    This repository contains multiple Arduino-based projects:

    13 parts
  • 2 layers84 × 77.5 mmMetal detector using arduino, the printed circuit board in 3D

    Metal detector using arduino

    garvit07122005-art/electronics-projects

    This repository contains multiple Arduino-based projects:

    9 parts
  • 2 layers74.5 × 77 mmTemperature sensor modified, the printed circuit board in 3D

    Temperature sensor modified

    garvit07122005-art/electronics-projects

    This repository contains multiple Arduino-based projects:

    9 parts
  • 2 layers82.6 × 77.4 mmDc voltemeter kicad, the printed circuit board in 3D

    Dc voltemeter kicad

    garvit07122005-art/electronics-projects

    This repository contains multiple Arduino-based projects:

    5 parts

Similar boards

  • 2 layers68.6 × 53.3 mmStupidDogFocuserPCB, the printed circuit board in 3D

    StupidDogFocuserPCB

    jeff-voight/StupidDogFocuser

    As open-source electronic telescope focuser

    21 parts2GPL-3.0
  • 2 layers98.1 × 101.3 mmClimatecontrolpcb, the printed circuit board in 3D

    Climatecontrolpcb

    Sharan21-cmd/climate-control-pcb-design

    A compact and efficient Climate Control PCB designed for monitoring and regulating temperature and humidity using embedded electronics.

    16 parts1
  • 2 layers111.8 × 68.6 mmAs1108, the printed circuit board in 3D

    As1108

    bit4man/temperature-display

    KICAD project for a simple temperature display on a 4 7-segment display

    10 parts
  • 2 layersTemperature, the printed circuit board in 3D

    Temperature

    kirprapfr/DHT11-Demo

    Simple demo for the DHT11

    11 partsMIT
  • 2 layers248 × 122.6 mmProject 1, the printed circuit board in 3D

    Project 1

    rajsandeep2410-maker/NRF24L01-Wireless-Communication-PCB

    Designed a wireless communication system using NRF24L01 modules and Arduino, with a custom PCB layout in KiCad including transmitter and receiver sections.

    16 parts
  • 2 layers68.8 × 53.6 mmRelatively Universal ROM Programmer, the printed circuit board in 3D

    Relatively Universal ROM Programmer

    AndersBNielsen/Relatively-Universal-ROM-Programmer

    Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.

    149 parts257GPL-3.0
  • 2 layers69.1 × 53.8 mmMotor controller, the printed circuit board in 3D

    Motor controller

    AlanFord/self-balancing-stick

    Dual Axis Reaction Wheel Inverted Pendulum

    25 parts79MIT
  • 2 layers68.6 × 53.3 mmProtogasm Board V2, the printed circuit board in 3D

    Protogasm Board V2

    Edging-Machines/Edging-Machines

    This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.

    14 parts67MIT

Questions

How big is the Temper PCB?

It measures 79.2 × 76.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Temper use?

5 parts, built around the ARDUINO UNO R3 and DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Temper KiCad files?

From the garvit07122005-art/electronics-projects repository on GitHub, at the commit this page was made from: the board is project_garvit/temerature_monitoring_system/temper.kicad_pcb and its schematic project_garvit/dc_voltmeter/dc_voltemeter_kicad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Temper design in my own project?

Its repository states no licence, so its author keeps all rights: ask garvit07122005-art before reusing the design.