

SchrackMulticlock
SPS na Proseku repo for SchrackTechink projects.
- Size
- 140 × 60 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 83
- Nets
- 91
- Pads
- 344
- Tracks, vias
- 489, 396
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 17 Aug 2024
- Updated
- 19 Aug 2026
Overview
SchrackMulticlock is an open-source printed circuit board by bismarx-v1, from the bismarx-v1/SchrackProjects repository on GitHub. It is a 4-layer board of 140 × 60 mm with 83 parts on 91 nets, routed with 489 tracks and 396 vias.
It is built around the ESP32-S3-WROOM-1-N8, MAX7219M and 74HC14, with the LM1117DT-3.3 and USBLC6-2SC6 among its other parts. Its parts include 25 resistors, 18 capacitors, 9 switches, 8 ICs and 8 diodes. It belongs with the ESP32 boards of this library.
Main components
5ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesMAX7219M
SOP-24-300mil10MHz 150uA 3-Wire Serial Interface 30mA 320mA 4V~5.5V 8 Segment x 8 Digit Built-in display RAM、PWM dimming、BCD input latch function、Power-up display blanking、Lamp test function、Cascadable function SOP-24-300mil Digital Tube Drivers ROHSHGSEMIDigital Tube Drivers74HC14
SOP-14-40℃~+85℃ 1.9V、3.98V、4.4V、5.48V、5.9V 100mV、260mV、260mV 20uA 25ns@4.5V,50pF 2V~6V 6 74HC Noise suppression function Schmitt trigger SOP-14 Inverters ROHSJSMSEMIInvertersLM1117DT-3.3
TO-2520℃~+125℃@(Tj) 1 1.2V@(800mA) 15V 3.3V 5mA 75dB@(120Hz) 800mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive TO-252 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
README
README.mdSchrackProjects
SPS na Proseku repo for SchrackTechink projects.
Parts
83| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26 |
| 13 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C6, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18 |
| 6 | 220R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R7, R8, R12, R13 |
| 6 | SW_Push | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | SW2, SW3, SW4, SW5, SW6, SW7 |
| 5 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C1, C2, C4, C5, C7 |
| 4 | LED | LED_THT:LED_D5.0mm | D6, D7, D8, D9 |
| 4 | Mounting Hole M3 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | LDD080AUE-101A | Schrack_brd:WENRUN_LDD080x_7segment_2dig | U2, U3, U4 |
| 2 | 15R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R11 |
| 2 | Conn_01x02_Pin | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | D_EXT1, D_EXT2 |
| 2 | D_Schottky | Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3, D4 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_EVQPE1 | SW8, SW9 |
| 1 | 0R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 74HC14 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U8 |
| 1 | Battery | Schrack_brd:SOLDER_PADS | BTss1 |
| 1 | Buzzer | Schrack_brd:BUZZER_CUI_CPT | BZ1 |
| 1 | ESP32-S3-WROOM-1 | PCM_Espressif:ESP32-S3-WROOM-1 | U6 |
| 1 | LM1117DT-3.3 | Package_TO_SOT_SMD:TO-252-3_TabPin2 | U1 |
| 1 | MAX7219 | Package_SO:SOP-24_7.5x15.4mm_P1.27mm | U5 |
| 1 | Polyfuse/50R | Fuse:Fuse_0805_2012Metric | F1 |
| 1 | Q_PMOS | Package_TO_SOT_SMD:SOT-23-3 | Q1 |
| 1 | SW_SPST | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | SW1 |
| 1 | TYPE-C-31-M-12 (USB C CONN) | sumec_brd:HRO_TYPE-C-31-M-12 | J1 |
| 1 | TestPoint | sumec_graphic:SCHRACK_LOGO_IMG | TP2 |
| 1 | TestPoint | sumec_graphic:SPS_LOGO_IMG | TP1 |
| 1 | TestPoint | sumec_graphic:BRAND_BERSERK | TP3 |
| 1 | TestPoint | sumec_graphic:BOCCHI_IMG | TP4 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:TSOT-23-6_HandSoldering | U7 |
More from bismarx-v1/SchrackProjects
3- 2 layers230 × 100 mm

- 4 layers98.5 × 88.5 mm

- 4 layers119.5 × 93.5 mm

SchrackCounterPrototype
bismarx-v1/SchrackProjects
SPS na Proseku repo for SchrackTechink projects.
26 parts2
Similar boards
- 4 layers51 × 51 mm

ESP32-S3
alisarpaksoy/ESP32-S3-Testboard
Custom ESP32-S3 test board designed in KiCad with USB-C, Si7021 temperature/humidity sensor, Qwiic I2C connector, RGB LED, and GPIO headers.
44 parts - 2 layers44.3 × 40.3 mm

VCU
KogantiAnoop/OTA-pcb-testing
Test PCB and code for OTA updates and wireless communication via s3 esp32
36 parts - 2 layers70 × 44.7 mm

Esp32-s3
n2048-creative-technology/butterflyeffect
Art installation: ESP32-S3 'leaf' PCBs with mmWave radar + TFT glitch-text display
40 partsMIT - 4 layers75 × 75 mm

- 2 layers98 × 57 mm

- 4 layers108.5 × 95.8 mm

- 2 layers

- 4 layers69 × 99 mm

Questions
How big is the SchrackMulticlock PCB?
It measures 140 × 60 mm and has 4 copper layers, 1.6 mm thick.
What parts does the SchrackMulticlock use?
83 parts, built around the ESP32-S3-WROOM-1-N8, MAX7219M, 74HC14 and LM1117DT-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SchrackMulticlock KiCad files?
From the bismarx-v1/SchrackProjects repository on GitHub, at the commit this page was made from: the board is SchrackMulticlock/PCB/SchrackMulticlock/SchrackMulticlock.kicad_pcb and its schematic SchrackCounter/PCB/SchrackCounter/CONNECTIVITY.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SchrackMulticlock design in my own project?
Its repository states no licence, so its author keeps all rights: ask bismarx-v1 before reusing the design.