
Air scales
beaked99/air-scales
2025-11-20. Updated all the footprints and symbols to their proper layouts. no more fkn errors. Hallefuckinglujah. Fucked up with LM74610 not using the right footprint. minor fix. 2025-11-16.

Futuresanchar-jaal is a custom, open-source digital walkie-talkie powered by ESP32-S3. Unlike traditional analog radios those suffer from static or require a central router to work, this device uses the ESP-NOW v2…
Sanchar is an open-source printed circuit board by birbh, from the birbh/future_sanchar-mesh repository on GitHub. It is a 2-layer board of 100.1 × 51.4 mm with 32 parts on 56 nets, routed with 372 tracks and 58 vias.
It is built around the ESP32-S3-WROOM-1U-N16R8, AMS1117-3.3 and WS2812B. Its parts include 7 capacitors, 4 ICs, 4 switches, 2 resistors and 1 diode. It belongs with the ESP32 boards of this library.
Future_sanchar-jaal is a custom, open-source digital walkie-talkie powered by ESP32-S3. Unlike traditional analog radios those suffer from static or require a central router to work, this device uses the ESP-NOW v2 protocol to create a direct p2p 2.4GHz network.
It is unique because it used i2s components alongside a massive 1440 bytes transmission buffer which helps to deliver a crisp voice with an ultra-low latency. Also it uses esp32-S3-wroom-1u which has ipex antenna connector in it which has drastically helped to increase the range of walkie talkie. It provides upto 800+ meters range under normal conditions and if with obstacles it provides upto 200 meters range.
Recently my country Nepal suffered a devastating flood which ruined so many human lives. So I thought that if I could make a Lo-Ra walkie-talkie, I could warn the people using the walkie-talkie along the long distance. Also in Nepal, due to difficult geography, the cellular network coverage could be unreliable when trekking and traveling through rural areas. In conclusion, I made this walkie-talkie to solve the real-world problem and help communicate over long distances easily.
fusion360 ::: Sanchar-jaal-cad
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | LOGO | LOGO | G***, G***, G***, G*** |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 100nf | Capacitor_SMD:C_0805_2012Metric | C3, C4, C6 |
| 3 | 10µF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C5 |
| 3 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_E-Switch_TL3301NxxxxxG | SW1, SW3-boot, SW4-reset |
| 1 | 100kΩ | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 10kΩ | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 1µF | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Battery_Cell | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | BT1 |
| 1 | Conn_01x04_Pin | Connector:FanPinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | ER_OLEDM0.91_1x-I2C | Display:ER_OLEDM0.91_1x-I2C | U2 |
| 1 | ESP32-S3-WROOM-1U-N16R8 | ESP32-S3-WROOM-1U-N16R8:XCVR_ESP32-S3-WROOM-1U-N16R8 | U1 |
| 1 | INMP441 Microphone | PCBLIB_INMP441_OMNIDIRECTIONAL_MICROPHONE_MODULE_2026-09-05:INMP441_OMNIDIRECTIONAL_MICROPHONE_MODULE | M1 |
| 1 | MAX98357A | Package_DFN_QFN:TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm | U4 |
| 1 | R_Potentiometer_MountingPin | Potentiometer_THT:Potentiometer_Bourns_PTV09A-1_Single_Vertical | RV1 |
| 1 | SW_SPDT | Button_Switch_THT:SW_Slide_SPDT_Straight_CK_OS102011MS2Q | SW2 |
| 1 | Speaker | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | LS1 |
| 1 | TP4056_cm | tp4056:TP4056-18650 | TP1 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1 |

beaked99/air-scales
2025-11-20. Updated all the footprints and symbols to their proper layouts. no more fkn errors. Hallefuckinglujah. Fucked up with LM74610 not using the right footprint. minor fix. 2025-11-16.



rastorc3v/emg-custom
New: - both hands control - new esp module (smaller size needed) - ne ADS1299 chip per hand - 8 channels - found at 30$ per chip - simpler infra - programmable gain - IMU chip per hand (gyro + accelerometer) - custom…

RaykiDan/PCB-Design-Project
Design PCB untuk monitoring kompor gas akan adanya kebocoran gas dan kemungkinan kondisi berbahaya

UbiTrich/home-assistant-poe-satellite
ESP32-S3 PoE voice satellite for Home Assistant


mx3353672833-debug/moto-gps-waveshare
MOTO GPS · Waveshare ESP32-S3 1.75C 圆屏导航 + iPhone App | Author: Maler X | Noncommercial, attribution required | Experimental
It measures 100.1 × 51.4 mm and has 2 copper layers, 1.6 mm thick.
32 parts, built around the ESP32-S3-WROOM-1U-N16R8, AMS1117-3.3 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the birbh/future_sanchar-mesh repository on GitHub, at the commit this page was made from: the board is pcb_sanchar/sanchar.kicad_pcb and its schematic pcb_sanchar/sanchar.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask birbh before reusing the design.