2 layers53.8 × 38.9 mm
ESP 32 LM
Quisqueya-Len/Electiva-LM
Repositorio correspondiente a la materia Electiva Mecatrónica C3-2024 Luis Molina
27 partsMIT
2 layers
PCB DESIGN
RaykiDan/PCB-Design-ProjectDesign PCB untuk monitoring kompor gas akan adanya kebocoran gas dan kemungkinan kondisi berbahaya
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 57
- Nets
- 65
- Pads
- 206
- Tracks, vias
- 214, 8
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 20 May 2025
- Updated
- 29 May 2025
Overview
PCB DESIGN is an open-source printed circuit board by RaykiDan, from the RaykiDan/PCB-Design-Project repository on GitHub. It is a 2-layer board with 57 parts on 65 nets, routed with 214 tracks and 8 vias.
It is built around the ESP32-S3-WROOM-1U-N16R8, AMS1117-3.3 and BC547B, with the LESD5D5.0CT1G, PTS810SJK250SMTRLFS and 1N5819HW-7-F-01 among its other parts. Its parts include 15 resistors, 12 capacitors, 10 diodes, 3 ICs and 2 connectors. It belongs with the ESP32 boards of this library.
Main components
12
ESP32-S3-WROOM-1U-N16R8
SMD,19.2x18mm-103.5dBm -40℃~+65℃ 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3R8 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、I2S、JTAG、USB SMD,19.2x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BC547B
TO-921 NPN 100mA 100nA 150MHz 200 300mV 45V 625mW 6V NPN TO-92 Bipolar (BJT) ROHSLGEBipolar (BJT)
LESD5D5.0CT1G
SOD-523-55℃~+150℃ 100W 12pF 16V 1uA 5V 7A 7V Bidirectional ESD IEC 61000-4-2 SOD-523 ESD and Surge Protection (TVS/ESD) ROHSGOODWORKUncategorised
PTS810SJK250SMTRLFS
SMD-4P,4.2x3.2mm-40℃~+85℃ 16V 2.5mm 2.6N 3.2mm 4.2mm 50mA J-Lead Round Button SPST Surface Mount,Vertical SMD-4P,4.2x3.2mm Tactile Switches ROHSC&KTactile Switches
1N5819HW-7-F-01
SOD-123Schottky DiodesDiodes Incorporated
3362P-1-503LF
插件-3P,7x6.6mm1 500mW 50kΩ ±10% ±100ppm/℃ 插件-3P,7x6.6mm Potentiometers, Variable Resistors ROHSBournsPotentiometers & Variable ResistorsCPI-3116-3-100T
插件,D=31mm-35℃~+80℃ 16.9mm 2.5V~3.5V 3.2kHz 31mm 97dB Active Buzzer (Built-in Driving Circuit) Piezoelectric 插件,D=31mm Buzzers ROHSCUIBuzzers
LM393AD
SOIC-8-18V~-2V、2V~18V 0℃~+70℃ 1.3us 100nA 1mA 2 2V~36V 2mV 36V 5nA Open-drain TTL SOIC-8 Comparators ROHSTexas InstrumentsComparators
SFH 4545
插件-40℃~+100℃ 1.5V 550mW/sr@IF=100mA 950nm Plugin Infrared LED Emitters ROHSOSRAM Opto SemiconInfrared LED Emitters
SK6812
SMD-4P,5.4x5mm-40℃~+85℃ 0.6mA 1.6mm 120° 160mcd~320mcd 1kHz 2000V 280mcd~515mcd 3.7V~5.5V 460nm~470nm 520nm~530nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Built-in power-on reset circuit Semi-transparent lens SMD-4P,5.4x5mm RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
TYPE-C-31-M-12
SMD-30℃~+80℃ 1 10,000 cycles 16P 20V 5A 7.35mm Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSHRO ElectronicsUSB Connectors
README
README.mdPCB-Design-Project
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | , , , , , | ||
| 5 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C4, C5, C8 |
| 5 | R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5, R6, R7, R8, R9 |
| 4 | 0u1F | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C7, C9, C10 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R11, R12, R13 |
| 3 | 220 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R10, R14, R15 |
| 3 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D7, D8, D10 |
| 3 | LESD5D5.0CT1G | Downloaded_from_internet:TVS_LESD5D5.0CT1G | D2, D3, D4 |
| 2 | 5K1 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | C | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C11, C12 |
| 2 | PTS810SJK250SMTRLFS | Downloaded_from_internet:PTS810SJG250SMTRLFS | S1, S2 |
| 1 | 1N5819HW-7-F | Downloaded_from_internet:SOD3715X145N | D1 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 3362P-1-503LF | footprints:TRIM_3362P-1-503LF | 3362P-1-503LF1 |
| 1 | 5k1 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | AMS1117-3.3 | Downloaded_from_internet:SOT229P700X180-4N | U1 |
| 1 | BC547B | footprints:TO127P254X732-3 | U4 |
| 1 | CPI-3116-3-100T | footprints:XDCR_CPI-3116-3-100T | LS1 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | ESP32-S3-WROOM-1U-N16R8 | Downloaded_from_internet:XCVR_ESP32-S3-WROOM-1U-N16R8 | U2 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D5 |
| 1 | LM393AD | footprints:SOIC127P599X175-8N | LM393AD1 |
| 1 | MQ-7 | footprints:XDCR_MQ-7 | MQ-7 |
| 1 | SFH_4545 | footprints:DIO_SFH_4545 | D9 |
| 1 | SK6812 | Downloaded_from_internet:LED_SK6812 | D6 |
| 1 | TYPE-C-31-M-12 | Downloaded_from_internet:HRO_TYPE-C-31-M-12 | J1 |
The 54 most common of 57 parts.
Similar boards
- 2 layers52.1 × 29.2 mm
- 2 layers65.1 × 52.9 mm
- 2 layers155 × 80 mm
- 2 layers84 × 46.3 mm
- 2 layers30 × 63 mm
- 2 layers80 × 46 mm
Main control board
StarweaverAudioLabs/main_control_board
Main controller board for Haruto's DAC
51 partsGPL-3.0 - 2 layers112.7 × 121.4 mm
Questions
What parts does the PCB DESIGN use?
57 parts, built around the ESP32-S3-WROOM-1U-N16R8, AMS1117-3.3, BC547B and LESD5D5.0CT1G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCB DESIGN KiCad files?
From the RaykiDan/PCB-Design-Project repository on GitHub, at the commit this page was made from: the board is PCB DESIGN.kicad_pcb and its schematic PCB DESIGN.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCB DESIGN design in my own project?
Its repository states no licence, so its author keeps all rights: ask RaykiDan before reusing the design.