4 layers290 × 133 mm
6 layers152.4 × 92 mm
Gpsrx
bgelb/gpsrx1- Size
- 152.4 × 92 mm
- Copper layers
- 6
- Thickness
- 1.56 mm
- Parts
- 289
- Nets
- 404
- Pads
- 1,259
- Tracks, vias
- 3,812, 887
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 2 Feb 2024
- Updated
- 27 May 2024
Overview
Gpsrx is an open-source printed circuit board by bgelb, from the bgelb/gpsrx repository on GitHub. It is a 6-layer board of 152.4 × 92 mm with 289 parts on 404 nets, routed with 3,812 tracks and 887 vias.
It is built around the 5M160ZE64C5N, AD8350ARZ20-REEL7 and ESP32-S3-WROOM-1-N8R2, with the LEA-M8T-0, PE43711B-Z and ADP7118AUJZ-R7 among its other parts. Its parts include 129 resistors, 97 capacitors, 24 ICs, 13 connectors and 7 inductors. It belongs with the ESP32 boards of this library.
Main components
10
5M160ZE64C5N
EQFP-64(7x7)0℃~+85℃ 1.71V~1.89V 128 160 54 7.5ns In-system programming MAX V Supports hot swap EQFP-64(7x7) Programmable Logic Device (CPLDs/FPGAs) ROHSIntel/AlteraProgrammable Logic Device (CPLDs/FPGAs)
AD8350ARZ20-REEL7
SOIC-8-40℃~+85℃ 0Hz~1GHz 1.8dBm 20dB 28mA 29dBm 5.9dB 5V~10V Low-power mode、Linearization design、Electrostatic protection SOIC-8 RF Amplifiers ROHSAnalog DevicesRF Amplifiers
ESP32-S3-WROOM-1-N8R2
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 97mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
LEA-M8T-0
SMD-28P,17.0x22.4-167dBm -40℃~+85℃ 2.7V~3.6V GPS、BeiDou、Galileo、GLONASS UART、I2C、USB、SPI SMD-28P,17.0x22.4 GNSS Modules ROHSu-bloxGNSS Modules
PE43711B-Z
QFN-24-EP(4x4)-40℃~+105℃ 0.25dB、0.5dB、1dB 0dB~31.75dB 1.5dB、1.85dB、2.4dB、2.8dB 50Ω 9kHz~6GHz Electrostatic protection、Digitally programmable attenuation、Multi-step attenuation、Digital control interface、Parallel control interface QFN-24-EP(4x4) RF Attenuators ROHSpSemiRF Attenuators
ADP7118AUJZ-R7
TSOT-5-40℃~+125℃@(Tj) 1 1.2V~19.8V 11uVrms 140uA 200mA 20V 420mV@(200mA) 88dB@(10kHz) Adjustable Over Current Protection、Over Temperature Protection、Soft Start、Enable Positive TSOT-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAnalog DevicesVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLMK1C1104
UncategorisedTexas InstrumentsT20Q100F3C3
QFP-100QFP-100 New Arrivals ROHSEfinixUncategorised
TDC7200PW
TSSOP-14-40℃~+85℃ 0.5uA 20MHz 2V~3.6V SPI TSSOP-14 ADCs/DACs - Special Purpose ROHSTexas InstrumentsADCs/DACs - Special Purpose
1N4448W
SOD-1231 Independent 1.25V@150mA 2.5uA 2A 4ns 500mA 500mW 75V SOD-123 Switching Diodes ROHSGuangdong HottechSwitching Diodes
README
README.mdgpsrx
gpsrx
Parts
289| Qty | Value | Footprint | References |
|---|---|---|---|
| 59 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C16, C17, C19, C20, C21, C23, C26, C27, C29, C30, C31, C34, C35 +43 |
| 30 | 22 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R13, R14, R15, R17, R33, R34, R35, R36, R37, R38, R39, R112, R113, R114 +14 |
| 26 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R5, R10, R16, R18, R29, R30, R49, R50, R78, R79, R115, R116, R117, R126, R127 +10 |
| 25 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R6, R11, R100, R101, R102, R103, R104, R105, R106, R107, R109, R111, R119, R120, R122 +9 |
| 16 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R19, R22, R25, R26, R55, R56, R65, R90, R99, R108, R110, R121, R128, R129, R130 |
| 9 | 4.7u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C10, C11, C12, C13, C14, C33, C36, C41 |
| 6 | Conn_Coaxial | Connector_Coaxial:SMA_Amphenol_901-143_Horizontal | J1, J2, J3, J4, J7, J12 |
| 5 | 100K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R53, R54, R123, R124, R125 |
| 5 | 2.2u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C18, C28, C43, C68, C70 |
| 4 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C32, C84, C85, C89 |
| 4 | 1N4448W | Diode_SMD:D_SOD-123 | D1, D2, D3, D4 |
| 4 | 4.7K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R31, R32, R91, R118 |
| 4 | 49.9 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20, R62, R63, R64 |
| 4 | ADP7118AUJZ | bgelb_footprint:UJ_5_ADI | U8, U9, U11, U22 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C69, C88 |
| 3 | 2K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21, R51, R52 |
| 2 | 1.8n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C49, C50 |
| 2 | 180p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C58, C60 |
| 2 | 2.4u | Inductor_SMD:L_1812_4532Metric_Pad1.30x3.40mm_HandSolder | L1, L2 |
| 2 | 3.3u | Inductor_SMD:L_1812_4532Metric_Pad1.30x3.40mm_HandSolder | L3, L4 |
| 2 | 3u | Inductor_SMD:L_1812_4532Metric_Pad1.30x3.40mm_HandSolder | L6, L7 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R27, R28 |
| 2 | 560p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C59, C61 |
| 2 | 74AUC1G79 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U18, U19 |
| 2 | Conn_01x06 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J13, J14 |
| 2 | LMK1C1104 | Package_SO:TSSOP-8_4.4x3mm_P0.65mm | U3, U6 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1, SW2 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2 |
| 1 | 1.1n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C22 |
| 1 | 1.2n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C52 |
| 1 | 1.6n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C24 |
| 1 | 10 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | 10.2K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R69 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R24 |
| 1 | 100u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C44 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C38 |
| 1 | 12.0K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R93 |
| 1 | 17.8K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R72 |
| 1 | 1n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C51 |
| 1 | 2.0K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R71 |
| 1 | 2.55K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R68 |
| 1 | 20.0K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R67 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | 3.6u | Inductor_SMD:L_1812_4532Metric_Pad1.30x3.40mm_HandSolder | L5 |
| 1 | 300p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C57 |
| 1 | 40.2K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12 |
| 1 | 43.2K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R76 |
| 1 | 430p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C55 |
| 1 | 453K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R74 |
| 1 | 47u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15 |
| 1 | 5M160ZE64 | bgelb_footprint:EQFP64_A-1P20_D2-4P5_INT | U2 |
| 1 | 6.34K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R70 |
| 1 | 78.7K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R77 |
| 1 | 820p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C25 |
| 1 | 9.09K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R75 |
| 1 | 91p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C54 |
| 1 | AD5689RxRUZ | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U16 |
| 1 | AD8350ARZ20-REEL7 | bgelb_footprint:SOIC127P600X175-8N | U10 |
| 1 | ADT4-6 | RF_Mini-Circuits:Mini-Circuits_CD637_H5.23mm | TR1 |
| 1 | AVR-JTAG-10 | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J10 |
| 1 | Battery_Cell | Battery:Battery_Panasonic_CR1025-VSK_Vertical_CircularHoles | BT1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | Conn_Coaxial_Power | Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal | J5 |
| 1 | ESP32-S3-WROOM-1-N8R2 | bgelb_footprint:ESP32-S3-WROOM-1_EXP | U12 |
| 1 | JAE_SIM_Card_SF72S006 | Connector_JAE:JAE_SIM_Card_SF72S006 | J11 |
| 1 | JTP32CSV | Oscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm_HandSoldering | U17 |
| 1 | LEA-M8T | bgelb_footprint:SMT_M8T-0_UBL | U4 |
| 1 | LTC2386CUH-16-PBF | bgelb_footprint:UH_32_ADI | U21 |
| 1 | LTM8074EY-PBF | bgelb_footprint:05-08-1566_ADI | U23 |
| 1 | LTM8078EY-PBF | bgelb_footprint:LTM8078IY-PBF_ADI | U7 |
| 1 | MCP23S17_SS | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U25 |
| 1 | MONARCH_2_GM02S | bgelb_footprint:XCVR_MONARCH_2_GM02S | U24 |
| 1 | OPA376xxDBV | Package_TO_SOT_SMD:SOT-23-5 | U15 |
| 1 | PE43711B-Z | bgelb_footprint:QFN24_4X4_PSM | U20 |
| 1 | Polyfuse | Fuse:Fuse_2920_7451Metric_Pad2.10x5.45mm_HandSolder | F1 |
| 1 | SIT5156A | bgelb_footprint:CQFN10L_5.000X3.200X0.950_SIT | U1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J6 |
| 1 | T20Q100F3C3 | bgelb_footprint:LQFP100_TRION_EFI | U13 |
| 1 | TDC7200 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U5 |
The 286 most common of 289 parts.
Similar boards
- 4 layers180 × 53 mm
- 4 layers84 × 51 mm
A500-sd plus controller
Mathesar/a500-sd-plus-controller
SD-card plus Ethernet controller for the Amiga 500
84 parts18 - 2 layers70 × 70 mm
EV MAX V E64
Gekkio/misc-hardware
Miscellaneous/utility/convenience hardware by Gekkio
34 parts6CC-BY-4.0 - 4 layers239.5 × 239.5 mm
Broadcast clock
espena/broadcast-clock
Digital precision studio/broadcast masterclock with WiFi configuration, acts as local NTP server with accurate GPS time sync.
440 parts28GPL-3.0 - 4 layers65 × 40 mm
HEXBERRY V-20Q100
logitiles/HEXBERRY-V-20Q100-0.91
Open Hardware FPGA platform
195 parts4CERN-OHL-S-2.0 - 4 layers53.3 × 85.1 mm
- 2 layers78.4 × 90.4 mm
IphoneFM panel
louisflakes/IphoneFM
KiCad project for IphoneFM Rev A. Built step by step from ../../design/rev-a/kicad-build-procedure.md; checked with ../../tools/kicadcheck.py.
134 parts
Questions
How big is the Gpsrx PCB?
It measures 152.4 × 92 mm and has 6 copper layers, 1.56 mm thick.
What parts does the Gpsrx use?
289 parts, built around the 5M160ZE64C5N, AD8350ARZ20-REEL7, ESP32-S3-WROOM-1-N8R2 and LEA-M8T-0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Gpsrx KiCad files?
From the bgelb/gpsrx repository on GitHub, at the commit this page was made from: the board is kicad/gpsrx.kicad_pcb and its schematic kicad/clocks.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Gpsrx design in my own project?
Its repository states no licence, so its author keeps all rights: ask bgelb before reusing the design.