
PE43711B-Z
pSemiExtended
-40℃~+105℃ 0.25dB、0.5dB、1dB 0dB~31.75dB 1.5dB、1.85dB、2.4dB、2.8dB 50Ω 9kHz~6GHz Electrostatic protection、Digitally programmable attenuation、Multi-step attenuation、Digital control interface、Parallel control interface QFN-24-EP(4x4) RF Attenuators ROHS
- Part id
- psemi/PE43711B-Z
- Category
- RF Attenuators
- Package
- QFN-24-EP(4x4)
- Pins
- 25
- In stock
- 1,406 at JLCPCB (C470929)
- Used on
- 5 open-source boards
Overview
The PE43711B-Z is a RF Attenuator made by pSemi in a QFN-24-EP(4x4) package with 25 pins. -40℃~+105℃ 0.25dB、0.5dB、1dB 0dB~31.75dB 1.5dB、1.85dB、2.4dB、2.8dB 50Ω 9kHz~6GHz Electrostatic protection、Digitally programmable attenuation、Multi-step attenuation、Digital control interface、Parallel control interface QFN-24-EP(4x4) RF Attenuators ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:PE43711B-Z, from EasyEDA) and its footprint (EasyEDA_Cloud:VQFN-24_L4.0-W4.0-P0.50-BL-EP2.3, from EasyEDA), ready for a KiCad board. 1,406 are in stock at JLCPCB (part C470929). 5 open-source boards in 4 repositories on GitHub use it.
Symbol
Footprint
Pinout
25| Pin | Name | Type |
|---|---|---|
| 1 | C0.25 | Unspecified |
| 2 | VDD | Unspecified |
| 3 | P#/S | Unspecified |
| 4 | GND | Unspecified |
| 5 | RF1 | Unspecified |
| 6 | GND | Unspecified |
| 7 | GND | Unspecified |
| 8 | GND | Unspecified |
| 9 | GND | Unspecified |
| 10 | GND | Unspecified |
| 11 | GND | Unspecified |
| 12 | GND | Unspecified |
| 13 | GND | Unspecified |
| 14 | RF2 | Unspecified |
| 15 | GND | Unspecified |
| 16 | LE | Unspecified |
| 17 | CLK | Unspecified |
| 18 | SI | Unspecified |
| 19 | C16 | Unspecified |
| 20 | C8 | Unspecified |
| 21 | C4 | Unspecified |
| 22 | C2 | Unspecified |
| 23 | C1 | Unspecified |
| 24 | C0.5 | Unspecified |
| 25 | EP | Unspecified |
Open-source boards using it
5- 6 layers152.4 × 92 mm

- 2 layers78.4 × 90.4 mm

IphoneFM panel
louisflakes/IphoneFM
KiCad project for IphoneFM Rev A. Built step by step from ../../design/rev-a/kicad-build-procedure.md; checked with ../../tools/kicadcheck.py.
134 parts - 4 layers100 × 100 mm

Amod n
gallicchio/AMOD-and-RFMOD
The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…
88 parts - 2 layers46.5 × 71.4 mm

IphoneFM
louisflakes/IphoneFM
KiCad project for IphoneFM Rev A. Built step by step from ../../design/rev-a/kicad-build-procedure.md; checked with ../../tools/kicadcheck.py.
106 parts - 2 layers125.5 × 90 mm

Parts like it
8PE4312C-Z
QFN-20-EP(4x4)-55℃~+105℃ 1MHz~4GHz 31.5dB 50Ω Digitally programmable attenuation、Multi-step attenuation、Digital control interface、Parallel control interface QFN-20-EP(4x4) RF Attenuators ROHSpSemiRF AttenuatorsHMC1122LP4METR
QFN-24-EP(4x4)-40℃~+85℃ 100MHz~6GHz 31.5dB 50Ω Electrostatic protection、Digitally programmable attenuation、Multi-step attenuation、Digital control interface、Parallel control interface、Integrated attenuator array QFN-24-EP(4x4) RF Attenuators ROHSAnalog DevicesRF AttenuatorsHMC472ALP4ETR
QFN-24-EP(4x4)-40℃~+85℃ 0.5dB 0Hz~3.8GHz 1.4dB 31.5dB 50Ω 560mW Electrostatic protection、Digitally programmable attenuation、Multi-step attenuation、Digital control interface QFN-24-EP(4x4) RF Attenuators ROHSAnalog DevicesRF AttenuatorsHMC542BLP4ETR
QFN-24-EP(4x4)-40℃~+85℃ 0Hz~4GHz 31.5dB 50Ω 560mW QFN-24-EP(4x4) RF Attenuators ROHSAnalog DevicesRF AttenuatorsPE43712B-Z
VFQFN-32-EP(5x5)-40℃~+105℃ 0.25dB、0.5dB、1dB 1.5dB、1.85dB、2.4dB、2.8dB 31.75dB 50Ω 9kHz~6GHz Electrostatic protection、Digitally programmable attenuation、Digital control interface、Parallel control interface VFQFN-32-EP(5x5) RF Attenuators ROHSpSemiRF AttenuatorsYAT-10A+
VDFN-6-EP-40℃~+85℃ 0Hz~18GHz 1.7W 50Ω Electrostatic protection VDFN-6-EP RF Attenuators ROHSMini-CircuitsRF AttenuatorsHMC802ALP3ETR
QFN-16-EP(3x3)-40℃~+85℃ 0Hz~10GHz 20dB 50Ω 840mW Electrostatic protection、Digitally programmable attenuation QFN-16-EP(3x3) RF Attenuators ROHSAnalog DevicesRF AttenuatorsRFSA2033TR7
QFN-16-EP(3x3)-40℃~+85℃ 1dB 25dB 50MHz~6GHz 50Ω Electrostatic protection、Voltage-controlled variable attenuation、Temperature compensation QFN-16-EP(3x3) RF Attenuators ROHSQorvoRF Attenuators
Questions
Is there a KiCad symbol and footprint for the PE43711B-Z?
Yes. The symbol is EasyEDA_Cloud:PE43711B-Z and the footprint EasyEDA_Cloud:VQFN-24_L4.0-W4.0-P0.50-BL-EP2.3, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the PE43711B-Z?
QFN-24-EP(4x4), with 25 pins. Its footprint is drawn on this page.
Where is the PE43711B-Z datasheet?
pSemi publishes it: the Datasheet link on this page opens it.
Where can I order the PE43711B-Z?
JLCPCB lists it as part C470929, with 1,406 in stock; the sellers' links on this page open their listings.
What can replace the PE43711B-Z?
Parts like it in the library: the PE4312C-Z by pSemi, the HMC1122LP4METR by Analog Devices, the HMC472ALP4ETR by Analog Devices and the HMC542BLP4ETR by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the PE43711B-Z?
5 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.