

BS Power
Oscilloscope
- Size
- 81.2 × 80.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 44
- Pads
- 168
- Tracks, vias
- 321, 41
- Pours
- 13
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 6 Nov 2022
- Updated
- 12 Dec 2022
Overview
BS Power is an open-source printed circuit board by bfiete, from the bfiete/BeefyScope repository on GitHub, published under the MIT licence. It is a 2-layer board of 81.2 × 80.9 mm with 43 parts on 44 nets, routed with 321 tracks and 41 vias.
It is built around the TPS54821RHLR, TLV62130RGTR and SMAJ16A. Its parts include 20 capacitors, 11 resistors, 4 connectors, 3 inductors and 1 IC.
Main components
3TPS54821RHLR
VQFN-14-EP(3.5x3.5)-40℃~+125℃@(TJ) 1 1.6MHz 4.5V~17V 600mV~15V 600uA 8A Adjustable Buck Buck Built-in Yes VQFN-14-EP(3.5x3.5) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTLV62130RGTR
QFN-16-EP(3x3)-40℃~+85℃@(TA) 1 19uA 2.5MHz 3A 3V~17V 900mV~5.5V Adjustable Buck Buck Built-in Yes QFN-16-EP(3x3) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersSMAJ16A
DO-214AC(SMA)-65℃~+150℃ 15.4A 15.4uA 16V 17.8V 26V 400W TVS Unidirectional DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHSLittelfuseESD And Surge Protection (TVS/ESD)
Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 22uF | Capacitor_SMD:C_0805_2012Metric | C1, C11, C12, C13, C14, C16, C20 |
| 4 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C5, C6, C7, C18 |
| 4 | 100k | Resistor_SMD:R_0603_1608Metric | R1, R3, R10, R13 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C2, C4, C17 |
| 2 | 2.2uH | Beefy:L_4.1x4.5 | L2, L3 |
| 2 | 3.3nF | Capacitor_SMD:C_0603_1608Metric | C8, C19 |
| 2 | TLV62130RGTR | SamacSys_Parts:QFN50P300X300X100-17N-D | PS2, PS3 |
| 1 | 0.022uF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 1.37k | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 150k | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 240k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 3.3uH | Beefy:L_6.7x7 | L1 |
| 1 | 3900pF | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 39pF | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 4.64k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 436500400 | Parts:MOLEX_436500400 | J4 |
| 1 | 470pF | Capacitor_SMD:C_0603_1608Metric | C15 |
| 1 | 750k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 75k | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | Barrel_Jack_Switch | Parts:CUI_PJ-202BH | J1 |
| 1 | Conn_02x07_Odd_Even | Connector_PinHeader_2.00mm:PinHeader_2x07_P2.00mm_Vertical | J3 |
| 1 | Fuse | Beefy:FUSE_C206912 | F1 |
| 1 | POWER | Connector_IDC:IDC-Header_2x10_P2.54mm_Vertical | J2 |
| 1 | SMAJ16A | Diode_SMD:D_SMA | D1 |
| 1 | TPS54821RHLR | Parts:IC_TPS54821RHLR | U1 |
More from bfiete/BeefyScope
1- 2 layers72.9 × 53.7 mm

Similar boards
- 6 layers99.5 × 100 mm

Zynq test
cropinghigh/zynq_a9_mb
Zynq 7z010 dev/main board based on components from Antminer S9 control board
528 parts17 - 2 layers30 × 50 mm

Chronos polaris hardware
Anish-Agarwall/Polaris-Flight-Computer
A flight computer designed during my freshman year in university for my Rocketry Organization
61 parts - 4 layers82 × 100 mm

PCB Kicad
ChristopherAwomolo/Nova-Micromouse
Newer version based off the Futura Micromouse
121 partsMIT - 2 layers87.5 × 70 mm

010 Implementation
NewTec-GmbH/esp32-can-iot
A ESP32 based interface between CAN-bus and IoT environments.
70 parts51BSD-3-Clause - 4 layers146 × 95 mm

- 2 layers75 × 75 mm

AD POWER DEVICE
R-Mutura/AD_POWER_DEVICE
Highly integrated Single board Computer with RK3566
593 parts3 - 4 layers195 × 45 mm

- 4 layers69 × 39 mm

JPBms2
jakepoz/jpbms
JPBms is a simple BMS for solar charging and balancing a 3-cell lithium ion battery.
132 parts2
Questions
How big is the BS Power PCB?
It measures 81.2 × 80.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BS Power use?
43 parts, built around the TPS54821RHLR, TLV62130RGTR and SMAJ16A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BS Power KiCad files?
From the bfiete/BeefyScope repository on GitHub, at the commit this page was made from: the board is pcb/BS_Power/BS_Power.kicad_pcb and its schematic pcb/BS_Power/BS_Power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BS Power design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).