

NOGLINK
PCB designs for Underwater Robotics at Berkeley (UR@B)
- Size
- 19.5 × 30.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 39
- Pads
- 108
- Tracks, vias
- 233, 38
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 1 Nov 2020
- Updated
- 12 Sep 2024
Overview
NOGLINK is an open-source printed circuit board by berkeleyauv, from the berkeleyauv/RoboSub_HW repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 19.5 × 30.8 mm with 22 parts on 39 nets, routed with 233 tracks and 38 vias.
It is built around the MIC5365-3.3YC5-TR and STLINK-V3MODS. Its parts include 8 resistors, 4 capacitors, 3 ICs, 3 connectors and 2 fuses.
Main components
2MIC5365-3.3YC5-TR
SC-70-5-40℃~+125℃ 1 150mA 200uVrms 3.3V 310mV@(150mA) 39uA 5.5V 65dB@(10kHz)、80dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SC-70-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSTLINK-V3MODS
SMD,30x15mmSMD,30x15mm Programmers, Emulators, and Debuggers ROHSSTMicroelectronicsProgrammers, Emulators, And Debuggers
README
MATE/BackplaneTest/README.mdBackplaneTest
Tests the ESCC and PCC along with a Molex Super Sabre for power.
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 47 | Resistor_SMD:R_0603_1608Metric | R3, R4, R5 |
| 2 | 0 | Resistor_SMD:R_0603_1608Metric | R2, R6 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 2.2k | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | 500mA | Fuse:Fuse_1206_3216Metric | F1, F2 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | ATA6561 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | CAN | extraparts:Molex_DuraClik_RH_5pin | J1 |
| 1 | LED_ARGB | LED_SMD:LED_Cree-PLCC4_2x2mm_CW | D1 |
| 1 | MIC5365-3.3YC5 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U1 |
| 1 | SPI/I2C/UART | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J3 |
| 1 | STLINK-V3MODS | extraparts:STLINK-V3MODS | U2 |
| 1 | SWD/VCP | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J2 |
| 1 | USR | Button_Switch_SMD:SW_SPST_PTS810 | SW1 |
More from berkeleyauv/RoboSub_HW
9- 4 layers31.3 × 34 mm

- 2 layers115.6 × 104.1 mm

Power distribution board
berkeleyauv/RoboSub_HW
PCB designs for Underwater Robotics at Berkeley (UR@B)
41 parts3GPL-3.0 - 2 layers33 × 13 mm

- 2 layers36 × 40 mm

- 2 layers

Noggin f072cb
berkeleyauv/RoboSub_HW
PCB designs for Underwater Robotics at Berkeley (UR@B)
26 parts3GPL-3.0 - 2 layers24 × 49 mm

- 2 layers

Noggin g0b1ke
berkeleyauv/RoboSub_HW
PCB designs for Underwater Robotics at Berkeley (UR@B)
21 parts3GPL-3.0 - 2 layers36 × 18 mm

- 2 layers83.5 × 22 mm

BackplaneTest
berkeleyauv/RoboSub_HW
PCB designs for Underwater Robotics at Berkeley (UR@B)
8 parts3GPL-3.0
Similar boards
- 2 layers32 × 48.6 mm

STLinkV3 Adapter
yingchaotw/STLinkV3_Adapter
This adapter board was designed to retain the STDC14 connector from stlink-v3.
11 parts9MIT - 4 layers92.5 × 101.6 mm

- 4 layers208 × 118 mm

SolenoidEngine4
atom-dispencer/SolenoidEngine4
My 4th attempt (though the first public one) at building a 4-cylinder USB-powered solenoid engine desk ornament.
121 parts - 4 layers99 × 82.4 mm

- 6 layers54.8 × 39.2 mm

- 4 layers

LightProcessor preFreeRoute
K0iNguyen/LightProcessor
PCB code and design for Optical chemical potential mapping research at Zeng Lab, Purdue University.
131 parts - 2 layers31.6 × 45.3 mm

- 6 layers100 × 70 mm

Questions
How big is the NOGLINK PCB?
It measures 19.5 × 30.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the NOGLINK use?
22 parts, built around the MIC5365-3.3YC5-TR and STLINK-V3MODS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NOGLINK KiCad files?
From the berkeleyauv/RoboSub_HW repository on GitHub, at the commit this page was made from: the board is General/NOGLINK/NOGLINK.kicad_pcb and its schematic General/ESCB/ESCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the NOGLINK design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).