2 layers364.4 × 167.3 mm
2 layers109.5 × 121 mm
Domo pool hard
benoitlx/Domo-Pool- Size
- 109.5 × 121 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 126
- Pads
- 389
- Tracks, vias
- 616, 11
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Dec 2020
- Updated
- 2 Aug 2021
Overview
Domo pool hard is an open-source printed circuit board by benoitlx, from the benoitlx/Domo-Pool repository on GitHub. It is a 2-layer board of 109.5 × 121 mm with 33 parts on 126 nets, routed with 616 tracks and 11 vias.
It is built around the TIP120. Its parts include 17 connectors, 4 capacitors, 3 ICs, 2 resistors and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdDomo-Pool
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Pow | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-8-2.54_1x08_P2.54mm_Horizontal | J4, J7, J8 |
| 2 | C | Capacitor_THT:C_Disc_D8.0mm_W2.5mm_P5.00mm | C1, C2 |
| 2 | C | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4 |
| 2 | D | Diode_THT:D_5W_P10.16mm_Horizontal | D1, D2 |
| 2 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | 10k1, 10k2 |
| 2 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 2 | TCA9555DBR | Package_SO:SSOP-24_5.3x8.2mm_P0.65mm | U2, U3 |
| 2 | TIP120 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2 |
| 1 | Ana Pow | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J9 |
| 1 | Analog | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-8-2.54_1x08_P2.54mm_Horizontal | J10 |
| 1 | Arduino_Mega2560_Shield | Arduino:Arduino_Mega2560_Shield | XA1 |
| 1 | Aux Relay | Connector_PinHeader_2.54mm:PinHeader_2x09_P2.54mm_Vertical | J16 |
| 1 | DIN | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-12-2.54_1x12_P2.54mm_Horizontal | J12 |
| 1 | Dout | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-11-2.54_1x11_P2.54mm_Horizontal | J14 |
| 1 | Dout Pow | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J13 |
| 1 | MP2307mod | MP2307:MP2307mod | U1 |
| 1 | Main relay | Connector_PinHeader_2.54mm:PinHeader_2x09_P2.54mm_Vertical | J15 |
| 1 | Mega IO | Connector_PinHeader_2.54mm:PinHeader_1x24_P2.54mm_Vertical | J2 |
| 1 | Mega IO | Connector_PinHeader_2.54mm:PinHeader_2x18_P2.54mm_Vertical | J3 |
| 1 | Mega IO | Connector_PinHeader_2.54mm:PinHeader_1x26_P2.54mm_Vertical | J11 |
| 1 | Pow | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J17 |
| 1 | Pow In | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J1 |
| 1 | pH pump | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J5 |
| 1 | redox pump | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J6 |
Questions
How big is the Domo pool hard PCB?
It measures 109.5 × 121 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Domo pool hard use?
33 parts, built around the TIP120. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Domo pool hard KiCad files?
From the benoitlx/Domo-Pool repository on GitHub, at the commit this page was made from: the board is hardware/domo_pool_hard/domo_pool_hard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Domo pool hard design in my own project?
Its repository states no licence, so its author keeps all rights: ask benoitlx before reusing the design.
Similar boards
- 2 layers148.8 × 132.2 mm
Usbflashprog
robsonsmartins/usbflashprog
A memory device programmer (Flash/EPROM/E2PROM) board and software, connected to PC by USB port.
125 parts36 - 2 layers489.6 × 170.7 mm
Mission control
dcpedit/mission-control
Modern replacement PCB for the IBM Model M 122
286 parts31CC-BY-4.0 - 2 layers168 × 123 mm
V2 - 2
RudgeLab/FluoPi
Code and teaching materials for UC/BackyardBrains raspberry pi "macro" scope.
131 parts26 - 2 layers
Catozap
jones139/catocam
Uses a custom trained YoloV8 model on a Raspberry Pi to Detect Cats in CCTV images and Unleash a Cat Deterrent
3 parts18GPL-3.0 - 2 layers32.5 × 21.2 mm
Taptap
dcpedit/taptap
TapTap is a solenoid breakout board for those who are interested in adding a solenoid to their existing project. All you need are the following components, and an extra data pin on your microcontroller.
9 parts13CC-BY-4.0 - 2 layers323.8 × 169.8 mm
- 2 layers57.1 × 102.9 mm
Synthwave
alexose/synthwave
An open-source experiment in carbon removal based on the electrochemical pH swing of seawater.
70 parts10CERN-OHL-P-2.0