Skip to the content
2 layers88.9 × 50.8 mmSynthCard, the printed circuit board in 3D

I designed this project with the help of PCBWay. You can get a copy of these cards through the PCBWay Shared Projects page.

Size
88.9 × 50.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
12
Pads
43
Tracks, vias
28, 0
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
21 Jun 2022
Updated
29 Dec 2023

Overview

SynthCard is an open-source printed circuit board by benjiaomodular, from the benjiaomodular/SynthCard repository on GitHub, published under the MIT licence. It is a 2-layer board of 88.9 × 50.8 mm with 12 parts on 12 nets, routed with 28 tracks and 0 vias.

It is built around the NE555P. Its parts include 3 capacitors, 2 resistors, 2 ICs, 1 diode and 1 connector.

Main components

1

README

README.md

SynthCard

A businesscard-sized synthesizer module based on the Atari Punk Console.

I designed this project with the help of PCBWay. You can get a copy of these cards through the PCBWay Shared Projects page.

Schematics under /KiCAD. Gerber files under /Fabrication. Panel design under /Inkscape.

A fully assembled SynthCard

Features

This module produces a pulse/square wave at 9Vpp.

There are two knobs. Knob 1 controls the frequency. Knob 2 controls the pulse width.

The module can be powered using a 9V power supply. A battery should work too.

Parts

12
QtyValueFootprintReferences
2500kbenjiaomodular:Potentiometer_RV09RV1, RV2
2NE555PPackage_DIP:DIP-8_W7.62mmU1, U2
1100nFbenjiaomodular:Capacitor_Rect_L7.2mm_W2.5mm_P5.00mmC2
110kbenjiaomodular:Resistor_L6.3mm_D2.5mm_P7.62mm_HorizontalR2
110nFbenjiaomodular:Capacitor_Rect_L7.2mm_W2.5mm_P5.00mmC1
110uFbenjiaomodular:Capacitor_Radial_D5.0mm_P2.5mmC3
11kbenjiaomodular:Resistor_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
15MM LEDLED_THT:LED_D5.0mmD1
1AudioJack2_SwitchTbenjiaomodular:AudioJack_3.5mmJ2
1BatteryConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalBT1

More from benjiaomodular/SynthCard

1
  • 2 layers88.9 × 50.8 mmSynthCard, the printed circuit board in 3D

    SynthCard

    benjiaomodular/SynthCard

    I designed this project with the help of PCBWay. You can get a copy of these cards through the PCBWay Shared Projects page.

    16 parts19MIT

Similar boards

  • 2 layers327.9 × 139 mmCoco2, the printed circuit board in 3D

    Coco2

    baldengineer/bit-preserve

    Project for capturing vintage, classic, aka old computer schematics in KiCad.

    147 parts446
  • 2 layers370.8 × 298.5 mm8 Bit Computer, the printed circuit board in 3D

    8 Bit Computer

    The-Invent0r/8-bit-Computer-PCB

    These are the KiCAD files for my 8-Bit Computer.

    323 parts142
  • 2 layers200 × 96 mmTouchtone555, the printed circuit board in 3D

    Touchtone555

    DarcyJProjects/touchtone555

    An open-source DIY, NE555-based analogue synthesizer - play notes with a stylus

    73 parts33
  • 4 layers340 × 210 mmYddraig, the printed circuit board in 3D

    Yddraig

    ddraig68k/hardware

    Schematic and CAD files for my 68K based computer

    224 parts29MIT
  • 2 layers152.9 × 74.9 mmClock, the printed circuit board in 3D

    Clock

    erikvanzijst/clock

    24H digital quartz clock from scratch

    82 parts21
  • 4 layers194.5 × 188.6 mmMyCpu, the printed circuit board in 3D

    MyCpu

    fortinsylvain/MyCpu

    Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.

    162 parts18MIT
  • 2 layers145.3 × 129.9 mmC128Diag, the printed circuit board in 3D

    C128Diag

    hackup/C128Diag

    Replica of the Commodore C128 Diagnostic Test cartridge Assy No. 325093-01.

    61 parts16
  • 2 layers200.7 × 149.9 mmDtz80-complete, the printed circuit board in 3D

    Dtz80-complete

    soster/dtZ80

    A simple 8 Bit computer based on the Z80 CPU

    107 parts15

Questions

How big is the SynthCard PCB?

It measures 88.9 × 50.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SynthCard use?

12 parts, built around the NE555P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SynthCard KiCad files?

From the benjiaomodular/SynthCard repository on GitHub, at the commit this page was made from: the board is KiCAD/SynthCard v1.0/SynthCard.kicad_pcb and its schematic KiCAD/SynthCard v1.0/SynthCard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the SynthCard design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).