

Magnetic board
- Size
- 40 × 60 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 83
- Nets
- 90
- Pads
- 318
- Tracks, vias
- 830, 214
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 18 Nov 2025
- Updated
- 26 Jun 2026
Overview
Magnetic board is an open-source printed circuit board by Benjamin-girard-1, from the Benjamin-girard-1/magnetometer-node-old repository on GitHub. It is a 4-layer board of 40 × 60 mm with 83 parts on 90 nets, routed with 830 tracks and 214 vias.
It is built around the INA851RGTR, HMC1001-RC and HMC1002-TR, with the LM324DT, MCP4728-E/UN and D882 among its other parts. Its parts include 31 capacitors, 26 resistors, 10 transistors, 7 ICs and 1 diode.
Main components
9INA851RGTR
VQFN-16-18V~-4V、4V~18V -40℃~+125℃ 1 100nV/℃ 106dB 10uV 110dB 15MHz 240ns 3.2nV/√Hz@1kHz 36V 37V/us 5.5nA 5nA 5pA/℃ 6mA 8V~36V Differential VQFN-16 Instrumentation Amplifiers ROHSTexas InstrumentsInstrumentation AmplifiersHMC1001-RC
SIP-8-40℃~+85℃ 2V~12V SIP-8 Magnetic Angle Sensors ROHSHoneywellMagnetic Angle SensorsHMC1002-TR
SOIC-20-300mil-40℃~+85℃ 2V~12V SOIC-20-300mil Magnetic Angle Sensors ROHSHoneywellMagnetic Angle SensorsLM324DT
SOIC-14-15V~-1.5V、1.5V~15V 0℃~+70℃ 1.2mA 1.3MHz 20nA 300nA 30uV/℃ 3V~30V 4 400V/ms 40nV/√Hz@1kHz 5mV 70mA 80dB Built-in compensation SOIC-14 Operational Amplifier ROHSSTMicroelectronicsOperational AmplifierMCP4728-E/UN
MSOP-10-40℃~+125℃ 12 2.7V~5.5V 2LSB 4 40nA 6us I2C Integrated buffer、Power-on reset、Power-down mode、Programmable gain Voltage Buffer MSOP-10 Digital to Analog Converters (DAC) ROHSMicrochip TechnologyDigital To Analog Converters (DAC)D882
TO-126-55℃~+150℃ 1 NPN 160 1uA 30V 3A 500mV 500mW 50MHz 6V NPN SOT-89-3L Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)B772
SOT-89-3L-55℃~+150℃ 1 PNP 160 1uA 30V 3A 500mV 500mW 50MHz 6V PNP SOT-89-3L Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)1N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching DiodesDMC3028LSD
SO-8-55℃~+150℃ 1 N-Channel + 1 P-Channel 1.8W 10.5nC@10V 28mΩ@10V 30V 3V 472pF 6.6A、6.8A SO-8 MOSFETs ROHSDiodes IncorporatedMOSFETs
Parts
83| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C10, C17, C20, C22, C25, C27, C30, C31 |
| 9 | 1k | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R17, R19, R20, R22, R23, R25 |
| 7 | 10u | Capacitor_SMD:C_0805_2012Metric | C1, C9, C11, C12, C13, C14, C15 |
| 6 | 100 | Resistor_SMD:R_0603_1608Metric | R6, R7, R11, R12, R14, R15 |
| 6 | 4u7 | Capacitor_SMD:C_1206_3216Metric | C16, C19, C21, C24, C26, C29 |
| 5 | D882 | Package_TO_SOT_SMD:SOT-89-3 | Q1, Q4, Q5, Q7, Q9 |
| 4 | 20 | Resistor_SMD:R_1206_3216Metric | R8, R13, R16, R26 |
| 4 | B772 | Package_TO_SOT_SMD:SOT-89-3 | Q3, Q6, Q8, Q10 |
| 4 | MountingHole | MountingHole:MountingHole_4.3mm_M4 | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_Array_Convex_4x0612 | RN1, RN2, RN3 |
| 3 | 220n | Capacitor_SMD:C_0603_1608Metric | C18, C23, C28 |
| 3 | 48,7 | Resistor_SMD:R_0603_1608Metric | R18, R21, R24 |
| 3 | INA851RGTR | magnode_footprints:VQFN-16-1EP_3x3mm_P0.5mm_EP1.68x1.68mm | U5, U6, U7 |
| 2 | 10u | Capacitor_SMD:C_1206_3216Metric | C5, C6 |
| 2 | 4k7 | Resistor_SMD:R_0603_1608Metric | R9, R10 |
| 1 | 1N4148WS | Diode_SMD:D_SOD-323 | D1 |
| 1 | 1n | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 20k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 220 | Resistor_SMD:R_2512_6332Metric | R2 |
| 1 | 220n | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | 528850274 | magnode_footprints:CON_528850274_MOL | J1 |
| 1 | DMC3028LSD | Package_SO:SO-8_3.9x4.9mm_P1.27mm | Q2 |
| 1 | HMC1001-RC | magnode_footprints:SIP8_HMC1001_HNW | U1 |
| 1 | HMC1002-TR | magnode_footprints:SOIC20_HNW | U2 |
| 1 | LM324DT | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U3 |
| 1 | MCP4728 | Package_SO:MSOP-10_3x3mm_P0.5mm | U4 |
More from Benjamin-girard-1/magnetometer-node-old
10- 4 layers190 × 110 mm

- 2 layers193 × 110 mm

- 4 layers190 × 110 mm

- 4 layers190 × 110 mm

- 4 layers190 × 110 mm

- 4 layers42 × 62 mm

- 4 layers65 × 42 mm

- 2 layers72 × 88 mm

- 4 layers72 × 106 mm

- 2 layers67 × 67 mm

Similar boards
- 2 layers121 × 75.5 mm

Jlctest
cjheath/jlcbasic
JLC Basic parts library for Kicad fetched and converted from EasyEDA
46 parts5 - 4 layers50 × 50 mm

MagneticSensors
Michalek007/MastersThesis
Investigation of magnetic field sensors for applications in low-frequency magnetic field measurements
56 parts - 6 layers254 × 130 mm

- 2 layers

Small-7
NVlabs/Cypress
Cypress is a scalable, GPU-accelerated PCB placement method inspired by VLSI. It incorporates tailored cost functions, constraint handling, and optimized techniques adapted for PCB layouts.
52 parts56Apache-2.0 - 2 layers177 × 91.6 mm

Power Charg AUTO 12V C
Aleksei327/STM32G474-Power-Charger
Experimental STM32G474-based high-current battery charger and programmable synchronous buck converter. KiCad hardware and STM32CubeIDE firmware.
160 parts3 - 4 layers99 × 93 mm

Piezo driver
cyntem/piezo_driver_stm32
3-axis PCB and schematics High Voltage Piezo actuator driver with 2 Step motor driver and optional blue-ray microscope (just for test)
280 parts - 2 layers

- 2 layers62.8 × 85 mm

Questions
How big is the Magnetic board PCB?
It measures 40 × 60 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Magnetic board use?
83 parts, built around the INA851RGTR, HMC1001-RC, HMC1002-TR and LM324DT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Magnetic board KiCad files?
From the Benjamin-girard-1/magnetometer-node-old repository on GitHub, at the commit this page was made from: the board is hardware/pcb/Expension_card_design/Commande mars 2026/magnetic_board/Untitled/Untitled.kicad_pcb and its schematic hardware/pcb/DAN_F10N_testboard/DAN_F10N_testboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Magnetic board design in my own project?
Its repository states no licence, so its author keeps all rights: ask Benjamin-girard-1 before reusing the design.