Skip to the content
2 layers68 × 59 mmTest podl led, the printed circuit board in 3D
Size
68 × 59 mm
Copper layers
2
Thickness
1.6 mm
Parts
53
Nets
26
Pads
120
Tracks, vias
194, 13
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
18 Mar 2026
Updated
5 May 2026

Overview

Test podl led is an open-source printed circuit board by ben5049, from the ben5049/phy-module-hardware repository on GitHub, published under the AGPL-3.0 licence. It is a 2-layer board of 68 × 59 mm with 53 parts on 26 nets, routed with 194 tracks and 13 vias.

It is built around the TLV7031QDCKRQ1, DMN21D2UFB-7B and DMP21D0UFB-7B, with the PMEG4002EL-QYL among its other parts. Its parts include 18 resistors, 9 transistors, 3 diodes, 2 capacitors and 1 IC.

Main components

4

README

README.md

PHY Module Hardware

10BASE-T1S v1

10base-t1s

Errata

1000BASE-T1 v1

1000base-t1

Errata

Parts

53
QtyValueFootprintReferences
153mmTestPoint:TestPoint_Pad_D3.0mmTP101, TP102, TP103, TP104, TP105, TP106, TP107, TP108, TP109, TP110, TP111, TP112, TP113, TP114, TP116
4100kResistor_SMD:R_0402_1005MetricR1, R3, R5, R2401
410kResistor_SMD:R_0402_1005MetricR7, R10, R419, R2402
4DMN21D2UFB-7Bproject_footprints:DMN21D2UFB7BQ3, Q301, Q302, Q303
4DMP21D0UFB-7Bproject_footprints:DMP21D0UFB7BQ2, Q4, Q5, Q6
3470kResistor_SMD:R_0402_1005MetricR416, R417, R418
210uCapacitor_SMD:C_0402_1005MetricC322, C323
22k2Resistor_SMD:R_0402_1005MetricR414, R415
2BZX884-C3V3,315project_footprints:BZX884Z101, Z102
118kResistor_SMD:R_0402_1005MetricR2
11kResistor_SMD:R_0402_1005MetricR8
133kResistor_SMD:R_0402_1005MetricR4
1470RResistor_SMD:R_0402_1005MetricR9
149R9Resistor_SMD:R_0402_1005MetricR6
1BZX884-C3V9,315project_footprints:BZX884Z1
1Conn_02x08_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_VerticalJ102
1DMN62D1LFD-7project_footprints:DMN62D1LFDQ1
1GREENLED_SMD:LED_0402_1005MetricD302
1Jumper_2_BridgedConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP101
1PMEG4002EL-QYLproject_footprints:PMEG4002EL-QYLD2402
1REDLED_SMD:LED_0402_1005MetricD301
1TLV7031QDCKRQ1project_footprints:SOT65P210X110-5NU1

More from ben5049/phy-module-hardware

3

Similar boards

  • 6 layers65 × 50 mmSwitch main v4, the printed circuit board in 3D

    Switch main v4

    ben5049/switch-v4-hardware

    KiCad design files for the 4th iteration of my single pair Ethernet (SPE) switch. The firmware can be found in unified-switch-firmware.

    471 parts33GPL-3.0
  • 6 layers93 × 50 mmSwitch main v5, the printed circuit board in 3D

    Switch main v5

    ben5049/switch-v5-hardware

    KiCad design files for the 5th iteration of my single pair Ethernet (SPE) switch. It is similar to v4 but with more ports and an RJ45 connector so an external media converter isn't needed to connect to regular Ethernet…

    646 parts25AGPL-3.0
  • 6 layers70 × 80 mmCm5-carrier v2, the printed circuit board in 3D

    Cm5-carrier v2

    ben5049/cm-carrier-hardware

    Compact CM5 carrier board with an M.2 E-key connector and a 1000BASE-T1 Ethernet PHY, as well as other optional IO.

    334 parts1AGPL-3.0
  • 2 layers59 × 59 mmLeft knob board, the printed circuit board in 3D

    Left knob board

    ben5049/Keyboard

    Features: - Wireless - 900mAh battery - Bluetooth (nRF52) - ZMK - 4 Port USB hub - BLDC Knob for haptic feedback - Kailh Choc V1 switches

    39 parts1Apache-2.0
  • 4 layers130 × 130 mmActuation, the printed circuit board in 3D

    Actuation

    liquid-rocketry-illinois/actuation-pcb

    324 parts1
  • 8 layers37 × 40.5 mmWatch main, the printed circuit board in 3D

    Watch main

    ben5049/Smart-Watch

    This project aims to take a cheap, common smart watch and upgrade it by replacing the screen and all internal electronics with custom hardware.

    206 partsApache-2.0
  • 4 layers100 × 90.4 mmMain PCB v2, the printed circuit board in 3D

    Main PCB v2

    ICRS/SSL-2024

    96 parts1Apache-2.0
  • 2 layers217.1 × 393.8 mmSweepv2, the printed circuit board in 3D

    Sweepv2

    davidphilipbarr/Sweep

    Sweep - a small promicro based keyboard inspired by the Ferris.

    53 parts2.1k

Questions

How big is the Test podl led PCB?

It measures 68 × 59 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Test podl led use?

53 parts, built around the TLV7031QDCKRQ1, DMN21D2UFB-7B, DMP21D0UFB-7B and PMEG4002EL-QYL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Test podl led KiCad files?

From the ben5049/phy-module-hardware repository on GitHub, at the commit this page was made from: the board is pcbs/test-podl-led/test-podl-led.kicad_pcb and its schematic pcbs/phy-module-10-base-t1s-v1/eth-conn-cdn.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Test podl led design in my own project?

Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).