2 layers80 × 50 mm
Eink clock
kaini/eink-clock
Source code and schematics for a clock using the ED060SC4 E-Ink display
81 parts11MIT
2 layers71.9 × 71.9 mm
Thermodraw
ben-barnes/thermodrawSchematic and PCB design for the thermodraw beer chiller
- Size
- 71.9 × 71.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 45
- Nets
- 50
- Pads
- 171
- Tracks, vias
- 563, 109
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 Jan 2017
- Updated
- 31 Jan 2017
Overview
Thermodraw is an open-source printed circuit board by ben-barnes, from the ben-barnes/thermodraw repository on GitHub. It is a 2-layer board of 71.9 × 71.9 mm with 45 parts on 50 nets, routed with 563 tracks and 109 vias.
It is built around the MKL05Z32VLC4, TPS71533DCKR-TP and DMP3098L, with the SA05-11EWA and CUS520,H3F among its other parts. Its parts include 16 resistors, 7 capacitors, 5 connectors, 3 ICs and 3 transistors. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
5
MKL05Z32VLC4
LQFP-32(7x7)-40℃~+105℃ 1.71V~3.6V 12bit 12bit 28 32 Bit 32KB 48MHz 4KB ARM Cortex-M0+ Built-in FLASH LQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSNXP SemiconductorsMicrocontrollers (MCU/MPU/SOC)
TPS71533DCKR-TP
SC-70-5-40℃~+85℃ 1 24V 3.3V 50mA 60dB@(100kHz) Fixed Positive Short Circuit Protection、Thermal Shutdown SC-70-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
DMP3098L
SOT-23-55℃~+150℃ 1 P-Channel 1.08W 120mΩ@4.5V 147pF 2.1V 210pF 3.8A 30V 336pF 8nC@4.5V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
SA05-11EWA
DIP-100.5 1 19mmx12.7mmx8mm 7 Segment 75mW Common Anode Red DIP-10 LED Segment Displays ROHSKingbrightLED Segment Displays
CUS520,H3F
SC-76(SOD-323)1A 200mA 280mV@10mA 30V 5uA@30V Standalone SC-76(SOD-323) Schottky Diodes ROHSToshibaSchottky Diodes
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 270 | Resistors_SMD:R_0603_HandSoldering | R5, R8, R9, R10, R11, R12, R13, R14, R15 |
| 7 | 47k | Resistors_SMD:R_0603_HandSoldering | R1, R2, R3, R4, R6, R7, R16 |
| 3 | 1500 uF | Custom:c_elec_18x22 | C3, C5, C6 |
| 3 | DMP3098L | TO_SOT_Packages_SMD:SOT-23_Handsoldering | Q1, Q2, Q3 |
| 3 | MountingHole_3.2mm_M3 | Mounting_Holes:MountingHole_3.2mm_M3 | M1, M2, M3 |
| 3 | SA05-11EWA | Displays_7-Segment:7SegmentLED_LTS6760_LTS6780 | AFF1, AFF2, AFF3 |
| 2 | 100 nF | Capacitors_SMD:C_0603_HandSoldering | C1, C7 |
| 2 | 470 nF | Capacitors_SMD:C_0603_HandSoldering | C2, C4 |
| 1 | BARREL_JACK | Connect:BARREL_JACK | CON1 |
| 1 | CONN-10-DIL | Pin_Headers:Pin_Header_Straight_2x05_Pitch1.27mm | J1 |
| 1 | CONN_01X02 | Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-2pol | P2 |
| 1 | CONN_01X03 | Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-3pol | P3 |
| 1 | CUS520,H3F | Diodes_SMD:SOD-323 | D2 |
| 1 | MKL05Z32VLC4 | Housings_QFP:LQFP-32_7x7mm_Pitch0.8mm | U3 |
| 1 | Molex 47053-1000 | Connectors_Molex:Molex_KK-6410-04_04x2.54mm_Straight | P1 |
| 1 | RESET | Buttons_Switches_SMD:SW_SPST_PTS645 | SW3 |
| 1 | SET | LEDs:LED_0603 | D1 |
| 1 | TLE52062G | Custom:TO-263-7Lead | U2 |
| 1 | TPS71533DCKR | TO_SOT_Packages_SMD:SC-70-5 | U1 |
| 1 | T_DOWN | Buttons_Switches_SMD:SW_SPST_PTS645 | SW2 |
| 1 | T_UP | Buttons_Switches_SMD:SW_SPST_PTS645 | SW1 |
Questions
How big is the Thermodraw PCB?
It measures 71.9 × 71.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Thermodraw use?
45 parts, built around the MKL05Z32VLC4, TPS71533DCKR-TP, DMP3098L and SA05-11EWA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Thermodraw KiCad files?
From the ben-barnes/thermodraw repository on GitHub, at the commit this page was made from: the board is PCB/thermodraw.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Thermodraw design in my own project?
Its repository states no licence, so its author keeps all rights: ask ben-barnes before reusing the design.
Similar boards
- 2 layers26.9 × 112.4 mm
Pov
Muriukidavid/KiCAD-boards
My KiCAD designs of circuits am making over time. They are not all final versions, some are work in progress
33 parts5GPL-3.0 - 2 layers48.3 × 40.6 mm
- 2 layers77.5 × 45.7 mm
- 2 layers115.2 × 78.6 mm
- 2 layers101.5 × 53.3 mm
- 2 layers68.5 × 53.3 mm
- 8 layers66 × 35.6 mm
SH RPi test jig hardware
hatlabs/SH-RPi-test-jig
Test jig software and hardware for SH-RPi
44 partsApache-2.0