2 layers101.5 × 53.3 mm
2 layers68.5 × 53.3 mm
Arduino Uno replacement based on Microchip SAMC21
- Size
- 68.5 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 73
- Nets
- 69
- Pads
- 275
- Tracks, vias
- 738, 124
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20210424)
- Created
- 23 Jul 2020
- Updated
- 4 May 2021
Overview
Uno is an open-source printed circuit board by fortytwosystems, from the fortytwosystems/Uno repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 68.5 × 53.3 mm with 73 parts on 69 nets, routed with 738 tracks and 124 vias.
It is built around the ATSAMC21G18A-AU, LMV358 and FT231XQ-R, with the LP2985-33DBV, USBLC6-2SC6 and DMP3098L among its other parts. Its parts include 26 capacitors, 13 resistors, 9 connectors, 6 ICs and 5 diodes. It belongs with the SAM D and SAM boards of this library.
Main components
8
ATSAMC21G18A-AU
TQFP-48(7x7)-40℃~+85℃ 10bit 12bit、16bit 2.7V~5.5V 256KB 32 Bit 32KB 38 48MHz ARM Cortex-M0+ Built-in FLASH TQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
LMV358
SOP-8-40℃~+125℃ 10pA 10pA 1MHz 2 2.5V~5.5V 20mA 20nV/√Hz@10kHz 2uV/℃ 40uA 5mV 600V/ms 65dB EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SOP-8 Operational Amplifier ROHSTECH PUBLICOperational Amplifier
FT231XQ-R
QFN-20-EP(4x4)-40℃~+85℃ 125uA 3.3V~5V 8mA USB 2.0 USB to UART QFN-20-EP(4x4) USB Converters ROHSFTDIUSB Converters
LP2985-33DBV
SOT-23-5-40℃~+125℃@(Tj) 1 150mA 16V 3.3V 30uVrms 45dB@(1kHz) 575mV@(150mA) 850uA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Noise bypass terminal Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
DMP3098L
SOT-23-55℃~+150℃ 1 P-Channel 1.08W 120mΩ@4.5V 147pF 2.1V 210pF 3.8A 30V 336pF 8nC@4.5V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
MF-MSMF050-2
1812-40℃~+85℃ 100A 150mΩ 15V 1A 1Ω 3.2mm 5.4mm 500mA 1812 Resettable Fuses ROHSBournsResettable Fuses
PJ-202A
插件-25℃~+85℃ 2.5A 24V 2mm 6.5mm DC Power Jack Right Angle 插件 DC Power Connectors ROHSCUIDC Power Connectors
Parts
73| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C6, C7, C8, C9, C10, C15, C18, C19, C20, C23, C24, C25, C27 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R10, R11, R12, R13 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R3, R4, R5 |
| 3 | 330r | Resistor_SMD:R_0603_1608Metric | R1, R8, R9 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C4, C12 |
| 2 | 15pF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 27r | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 2 | 470r | Resistor_SMD:R_0603_1608Metric | FB1, FB2 |
| 2 | 47pF | Capacitor_SMD:C_0603_1608Metric | C16, C17 |
| 2 | 47uF | Capacitor_SMD:CP_Elec_6.3x5.4 | C21, C22 |
| 2 | Fiducial | Fiducial:Fiducial_0.75mm_Mask1.5mm | FID1, FID2 |
| 2 | YELLOW | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 2 | YLW | LED_SMD:LED_0603_1608Metric | D3, D4 |
| 1 | 0.01uF | Capacitor_SMD:C_0603_1608Metric | C13 |
| 1 | 100pF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C26 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_MicroCrystal_CC7V-T1A-2Pin_3.2x1.5mm | Y1 |
| 1 | 4.7uF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C14 |
| 1 | ANALOG | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | ATSAMC21G18A | Package_QFP:TQFP-48_7x7mm_P0.5mm | U1 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J5 |
| 1 | DIGITAL-HIGH | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J6 |
| 1 | DIGITAL-LOW | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J7 |
| 1 | DMP3098L | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | FT231XQ | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U4 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | JTAG | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical | J1 |
| 1 | LMV358 | Package_SO:VSSOP-8_3.0x3.0mm_P0.65mm | U2 |
| 1 | LP2985-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U6 |
| 1 | M7 | Diode_SMD:D_SMA | D5 |
| 1 | MF-MSMF050-2 | Fuse:Fuse_1812_4532Metric | F1 |
| 1 | NCP1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | PJ-202A | FortyTwoLabs:Barrel-Jack-PJ-202A | J9 |
| 1 | POWER | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J2 |
| 1 | RESET-EN | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | SW_SPST | FortyTwoLabs:Button-CK-PTS525 | SW1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | USB_B | FortyTwoLabs:USB-B-Amphenol-61729-1011BLF | J8 |
Questions
How big is the Uno PCB?
It measures 68.5 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Uno use?
73 parts, built around the ATSAMC21G18A-AU, LMV358, FT231XQ-R and LP2985-33DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Uno KiCad files?
From the fortytwosystems/Uno repository on GitHub, at the commit this page was made from: the board is Uno.kicad_pcb and its schematic Power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Uno design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers101.6 × 53.3 mm
- 2 layers68.6 × 53.3 mm
Arduino board pcb
marrynrv/Custom-Arduiono-Board
Custom Arduino-compatible microcontroller development board designed in KiCad based on the classic Uno reference schematic
57 parts - 2 layers56.6 × 62.2 mm
ArduinoR3
Morethanmany2/Arduino-Uno
As a part of my day-to-day use, i tried to design the Arduino UNO dev board using all the datasheet materials and footprints required for precise design.
59 parts - 4 layers124 × 89.4 mm
ATMega 328 PU Board
olexsu/ATmega328_control_Board
Custom ATmega328 embedded control board designed in KiCad with Arduino firmware.
140 parts - 2 layers70 × 50.5 mm
- 4 layers105.4 × 57.5 mm
- 4 layers55.5 × 48 mm
