2 layers189.5 × 204.9 mm
SmartSpin2k Panelized
doudar/SmartSpin2k
Transform your spin bike into a Smart Trainer!
749 parts292GPL-2.0
2 layers40.5 × 37.5 mm
UART TTL Flipper Zero
Bemmy-projects/UART-TTL-Flipper_Zero1TTL to RS232 Serial Adapter for the Flipper Zero
- Size
- 40.5 × 37.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 25
- Pads
- 45
- Tracks, vias
- 34, 4
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 9 Jul 2024
- Updated
- 9 Jul 2024
Overview
UART TTL Flipper Zero is an open-source printed circuit board by Bemmy-projects, from the Bemmy-projects/UART-TTL-Flipper_Zero repository on GitHub. It is a 2-layer board of 40.5 × 37.5 mm with 7 parts on 25 nets, routed with 34 tracks and 4 vias.
It is built around the MAX3232ID. Its parts include 4 capacitors, 2 connectors and 1 IC. It belongs with the interfaces and adapters boards of this library.
Main components
1README
README.mdUART-TTL-Flipper_Zero
TTL to RS232 Serial Adapter for the Flipper Zero
CC BY-NC-SA 4.0 Free for non-commercial use. No warranties or support, express or implicit, are provided. Use as is.
This is a simple UART TTL to RS232 Serial Adapter based on the MAX2323 chip for the Flipper Zero. All necessary files are provided. After building; the standard values in the Flipper UART Adapter are sufficient for use.
BOM: 1 MAX3232CSE+ 5 0.1uF capacitors 0805 1 90deg 1x10 pin strip, 2.54mm pitch 1 D-SUB 9 Connector, 7.70mm offset
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | .1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4 |
| 1 | DE9_Receptacle_MountingHoles | Connector_Dsub:DSUB-9_Female_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm | J2 |
| 1 | FlipperCon | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J1 |
| 1 | MAX3232 | MAX327CSE:SOIC127P600X175-16N | U1 |
Questions
How big is the UART TTL Flipper Zero PCB?
It measures 40.5 × 37.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the UART TTL Flipper Zero use?
7 parts, built around the MAX3232ID. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the UART TTL Flipper Zero KiCad files?
From the Bemmy-projects/UART-TTL-Flipper_Zero repository on GitHub, at the commit this page was made from: the board is UART-TTL-Flipper_Zero.kicad_pcb and its schematic UART-TTL-Flipper_Zero.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the UART TTL Flipper Zero design in my own project?
Its repository states no licence, so its author keeps all rights: ask Bemmy-projects before reusing the design.
Similar boards
- 2 layers193 × 113 mm
- 2 layers81.6 × 44.5 mm
ELTerm
zephray/ELTerm
ANSI/VT100-compatible serial terminal built with Raspberry Pi Pico and EL640.480-AM/AG screen
31 parts92MIT - 2 layers87 × 71 mm
- 2 layers100 × 93 mm
Speeduino base
Tjeerdie/SPECTRE
Speeduino compatible engine control unit (ECU) based around black STM32F407VET6 board.
213 parts59GPL-3.0 - 2 layers33.1 × 43.8 mm
ThrottleBlaster
scrapcomputing/ThrottleBlaster
A Turbo circuit with a MHz display that can slow down the CPU speed
34 parts57GPL-2.0 - 2 layers127.3 × 54.1 mm
ESP32 SolarBox
cole8888/SRNE-Solar-Charge-Controller-Monitor
Read data from SRNE solar charge controllers.
34 parts42 - 4 layers98.8 × 85.1 mm
