
Hub
BCIT-BAJA/BCIT-BAJA-DAQ
The telemetry system for BCIT-BAJA car, collects strain across suspension components of car to allow BAJA to optimize material and reinforce weak areas of suspension.

The telemetry system for BCIT-BAJA car, collects strain across suspension components of car to allow BAJA to optimize material and reinforce weak areas of suspension.
Amplifier is an open-source printed circuit board by BCIT-BAJA, from the BCIT-BAJA/BCIT-BAJA-DAQ repository on GitHub. It is a 2-layer board of 27.5 × 8.8 mm with 13 parts on 12 nets, routed with 97 tracks and 3 vias.
It is built around the TLV9061SQDBVRQ1, INA333AIDGKR and MCU08050D1001BP500, with the CL21B104KBCNNWC, RG2012P-103-B-T5 and RG2012P-203-B-T5 among its other parts. Its parts include 6 resistors, 2 capacitors, 2 ICs and 2 switches. It belongs with the audio and music boards of this library.
During the last BAJA competition,The BAJA team was unable to measure dynamic forces applied onto the suspension of the car. As a result, during the last competition, it bent.
The telemetry system for BCIT-BAJA car, collects strain across suspension components of car to allow BAJA to optimize material and reinforce weak areas of suspension. As well as collect other data such as linear/angular acceleration.
There consists of 2 parts of this project.
PART B the amplification of the (-15-15mV) analog strain signal to (0-3.0V) which is then routed to
PART A, which collects the 8 conditioned analog signals and is transmitted/received over a 915MHz antenna
Power supply circuitry
Conditioning of analog signals
Additional peripherals used
Example of LTSPICE simulation used for amplifier board + signal conditioning
Verified amplifier board working
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1K +-0.1% | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R4 |
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 1 | 10K +-0.1% | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 20K +-0.1% | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 500 ± 5% | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | CONN_01X03_2.54MM | Lib:AdamTech_BHR-06-VUA | S1 |
| 1 | CONN_01X04_StrainGauge | Lib:CONN_01X04 | S2 |
| 1 | INA333AIDGKR | Lib:INA333AIDGKR_SOP65P490X110-8N | U1 |
| 1 | LOGO | Lib:BCIT-Racing-Logo_20mm_8mm8 | G*** |
| 1 | TLV9061SQDBVRQ1 | Package_TO_SOT_SMD:TSOT-23-6 | U2 |

BCIT-BAJA/BCIT-BAJA-DAQ
The telemetry system for BCIT-BAJA car, collects strain across suspension components of car to allow BAJA to optimize material and reinforce weak areas of suspension.

stockmann-lab/shim_amp_hardware_linear
Hardware related to open-source shim amplifier development for MRI research


JitterCompany/debug-tools
Collection of useful utility PCBs for development purposes

node9909/Graduation-project-files
design of a HD-SEMG system, using ads1298, Arduino DUE, ST32F4, INA333 adn AD8232

jobitjoseph/Precision-Digital-Micro-Current-Meter
Keeping track of extremely low current levels is often essential when developing or testing low-power devices, especially in the field of embedded systems and battery-operated electronics.

Swapnil007-Curious/NeuroVox-v2.0
NeuroVox v2.0 is a conformal 220×50mm forearm wearable PCB. Powered by an ESP32-S3, it captures high-res 4-channel EMG via AD8232, INA333, and ADS1299 ICs using leadless, integrated dry Ag/AgCl edge electrodes.

Capstone-Group-C1/weight-sensor-pcb
Converts Load Cell(s) analog signal into CAN signal.

CaseyyWu/Hybrid-Thermoelectric-Piezoelectric-Energy-Monitoring-System
Kicad Projects
It measures 27.5 × 8.8 mm and has 2 copper layers, 1.6 mm thick.
13 parts, built around the TLV9061SQDBVRQ1, INA333AIDGKR, MCU08050D1001BP500 and CL21B104KBCNNWC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the BCIT-BAJA/BCIT-BAJA-DAQ repository on GitHub, at the commit this page was made from: the board is Revision01/Hardware/Amplifier/Amplifier.kicad_pcb and its schematic Revision01/Hardware/Amplifier/Amplifier.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask BCIT-BAJA before reusing the design.