Skip to the content
2 layers50.5 × 30.6 mmMCU Data Logger, the printed circuit board in 3D

An ATmega328P-based data logger PCB designed in KiCad 9, featuring both 2-layer and 4-layer layout versions from the same schematic for direct comparison.

Size
50.5 × 30.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
30
Nets
34
Pads
117
Tracks, vias
337, 34
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
15 May 2026
Updated
15 May 2026

Overview

MCU Data Logger is an open-source printed circuit board by BBIkal, from the BBIkal/ATmega328P-MCU-Data-Logger repository on GitHub. It is a 2-layer board of 50.5 × 30.6 mm with 30 parts on 34 nets, routed with 337 tracks and 34 vias.

It is built around the 24LC1025-I/P and DS1337S+T&R. Its parts include 7 resistors, 5 capacitors, 4 ICs, 4 connectors and 2 diodes. It belongs with the sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

An ATmega328P-based data logger PCB designed in KiCad 9, featuring both 2-layer and 4-layer layout versions from the same schematic for direct comparison.

Parts

30
QtyValueFootprintReferences
4MountingHoleMountingHole:MountingHole_2.1mmH1, H2, H3, H4
310KResistor_SMD:R_0805_2012MetricR1, R2, R6
222pFCapacitor_SMD:C_0805_2012MetricC2, C3
224LC1025Package_SO:SOIC-8_5.3x5.3mm_P1.27mmU1, U3
2330Resistor_SMD:R_0805_2012MetricR5, R7
24.7KResistor_SMD:R_0805_2012MetricR3, R4
2Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1, J3
2LEDLED_SMD:LED_0805_2012MetricD1, D2
10.1uFCapacitor_SMD:C_0805_2012MetricC4
10.1ufCapacitor_SMD:C_0805_2012MetricC1
1100nFCapacitor_SMD:C_0805_2012MetricC5
116 MHzCrystal:Crystal_SMD_5032-2Pin_5.0x3.2mm_HandSolderingY2
132.768 KHzCrystal:Crystal_SMD_5032-2Pin_5.0x3.2mm_HandSolderingY1
1ATMEGA328P-AU_SL044footprints:QFP80P900X900X120-32NU4
1BatteryConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalBT1
1Conn_01x09_PinConnector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_VerticalJ2
1Conn_02x03_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ4
1DS1337S_footprints:SOIC127P600X175-8NU2

The 29 most common of 30 parts.

Similar boards

  • 2 layers50.2 × 31.2 mmMCU Datalogger, the printed circuit board in 3D

    MCU Datalogger

    futureshocked/KLP4e_MCU-Datalogger

    This is the repository for the "MCU Datalogger" project.

    31 parts138MIT
  • 2 layers42.7 × 24.4 mmBACEE, the printed circuit board in 3D

    BACEE

    futureshocked/KicadLikeAPro-Project-3-BACEE

    This is one of the PCB projects from the Kicad Like a Pro book. It contains a two and four layer board that implements an Arduino clone with external EEPROM and a clock.

    20 parts19MIT
  • 4 layers49.3 × 34.1 mmDattalogger Board, the printed circuit board in 3D

    Dattalogger Board

    DevMajed/DataLogger-Board

    Hardware PCB Design for AVR-based Datalogger using KiCAD

    30 parts4
  • 2 layers41.4 × 27.7 mmDuinoClone, the printed circuit board in 3D

    DuinoClone

    ARHollisSr/DuinoClone

    Arduino Clone with extended EEPROM

    20 parts1MIT
  • 4 layers49 × 27.9 mmMCU Datalogger, the printed circuit board in 3D

    MCU Datalogger

    elCowboyLuigi/MCU_datalogger_project_study

    This is a PCB project of a MCU Datalogger with EEPROM and Clock from section 11 of PCB Design with Kicad course for use as a learning experience

    31 parts1
  • 4 layers50 × 30 mmDatalogger v1, the printed circuit board in 3D

    Datalogger v1

    GildardoRestrepo/course_electronics_design

    Repositorio de actividades entregables del curso de diseño electrónico. UPB 2026-02

    35 parts1MIT
  • 2 layers52.2 × 34.4 mmMCU DataLoggerPCB, the printed circuit board in 3D

    MCU DataLoggerPCB

    lologog/MCU_DataLogger

    A microcontroller-based device for logging and storing data from external sensors. The data is saved to EEPROM memory for later retrieval and analysis

    30 parts1MIT

Questions

How big is the MCU Data Logger PCB?

It measures 50.5 × 30.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the MCU Data Logger use?

30 parts, built around the 24LC1025-I/P and DS1337S+T&R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the MCU Data Logger KiCad files?

From the BBIkal/ATmega328P-MCU-Data-Logger repository on GitHub, at the commit this page was made from: the board is MCU Data Logger.kicad_pcb and its schematic Connectors.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the MCU Data Logger design in my own project?

Its repository states no licence, so its author keeps all rights: ask BBIkal before reusing the design.