2 layers120.6 × 29 mm
PillPCB
andreq/iSpindel-Gravitymon-Pill-PCB
A PCB used to build an iSpindel or GravityMon hydrometer that fit into a *popular brand* Pill casing instead of a PETling container
13 parts8GPL-3.0
2 layers34 × 133.3 mm
Ispindle rwb
bathoorn/ispindel_kicad1- Size
- 34 × 133.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 14
- Pads
- 31
- Tracks, vias
- 248, 6
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 2 Jun 2022
- Updated
- 2 Jun 2022
Overview
Ispindle rwb is an open-source printed circuit board by bathoorn, from the bathoorn/ispindel_kicad repository on GitHub. It is a 2-layer board of 34 × 133.3 mm with 9 parts on 14 nets, routed with 248 tracks and 6 vias.
It is built around the DS18B20, BAT43 and EG1218. Its parts include 3 ICs, 2 resistors, 2 switches and 1 diode.
Main components
3
DS18B20
TO-92-55℃~+125℃ 12bit 3V~5.5V 750ms Single-bus ±0.4℃ TO-92 Temperature Sensors ROHSUMWTemperature Sensors
BAT43
DO-204AH-65℃~+125℃ 1 Independent 1V@0.2A 200mA 30V 4A 500nA@25V DO-204AH Schottky Diodes ROHSSTMicroelectronicsSchottky Diodes
EG1218
插件-20℃~+70℃ 11.6mm 200mA 30V 4mm 7.4mm Black PC Pin Rectangular Columnar SPDT Through Hole Plugin Slide Switches ROHSE-SwitchSlide Switches
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 220k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 4.7k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | BAT43 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_1042_1x18650 | BT1 |
| 1 | DS18B20 | Package_TO_SOT_THT:TO-92_Inline_Wide | U2 |
| 1 | EG1218 | Button_Switch_THT:SW_CuK_OS102011MA1QN1_SPDT_Angled | SW2 |
| 1 | GY-521 | libs:GY-521-minimal | U3 |
| 1 | SW_Push | libs:Reset_1x02_P2.54mm_Vertical | SW1 |
| 1 | TP4056Module | libs:TP4056-18650 | U4 |
Similar boards
- 4 layers120 × 113 mm
Voron Klipper Board
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
360 parts1.1kGPL-3.0 - 2 layers30 × 100 mm
- 2 layers100 × 100 mm
- 2 layers54 × 64 mm
DonConIOmini
ravinrabbid/DonCon2040
RP2040 based firmware and hardware for DIY Taiko no Tatsujin Drum Controllers
96 parts66MIT - 2 layers19.7 × 99.1 mm
Main pcb
Testbild-synth/HAGIWO_arduino_oscillator
4HP through hole version of the HAGIWO FM/additive/chord oscillator with mode switch and gain input.
40 parts57MIT - 2 layers29 × 99.8 mm
Main pcb
Testbild-synth/Hagiwo_009_030_sequencer
A through-hole PCB conversion of HAGIWO's 6 channel eurorack gate sequencer. Includes Gerbers, Code and building instructions.
26 parts49MIT - 2 layers63 × 46 mm
Pi485
bvarner/pi485
An open-source TTL UART <-> RS485 converter, intended for a Raspberry Pi or Arduino
31 parts41MIT
Questions
How big is the Ispindle rwb PCB?
It measures 34 × 133.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ispindle rwb use?
9 parts, built around the DS18B20, BAT43 and EG1218. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ispindle rwb KiCad files?
From the bathoorn/ispindel_kicad repository on GitHub, at the commit this page was made from: the board is ispindle_rwb.kicad_pcb and its schematic ispindle_rwb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ispindle rwb design in my own project?
Its repository states no licence, so its author keeps all rights: ask bathoorn before reusing the design.