
Uncut Gem
QuantumVillage/UncutGem
A prototype Full Stack fully Open Source NV Center Diamond Magnetometer

Projeto da disciplina de Desenho Tecnico Aplicado da UTFPR-CT
PCB Oximetro is an open-source printed circuit board by Batheusz, from the Batheusz/PCB_Oximetro repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 61.2 × 57.9 mm with 14 parts on 36 nets, routed with 58 tracks and 0 vias.
It is built around the LM1117MP-3.3. Its parts include 5 capacitors, 3 connectors, 2 resistors, 2 ICs and 1 diode. It belongs with the ESP32 boards of this library.
Projeto da disciplina de Desenho Tecnico Aplicado da UTFPR-CT
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C3 |
| 2 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C4, C9 |
| 1 | 1K | Resistor_SMD:R_1206_3216Metric | R2 |
| 1 | 1N4002 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 22uF | Capacitor_THT:CP_Radial_Tantal_D5.0mm_P2.50mm | C2 |
| 1 | 2K2 | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | Conn_01x05 | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J1 |
| 1 | Conn_01x08 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J2 |
| 1 | ESP32-DEVKIT-V1 | Espressif:MODULE_ESP32_DEVKIT_V1 | U5 |
| 1 | LM1117MP-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | SW_Push | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx58-2LFS | SW1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10104110_Horizontal | J3 |

QuantumVillage/UncutGem
A prototype Full Stack fully Open Source NV Center Diamond Magnetometer

NYDEREK/LineFollower_GRUZIK2.0-light
GRUZIK2.0 is simple light construction made for "line follower light" competition

BG6LH/FT-81x-BT-DIGI-Adaptor
A PCB Design of Bluetooth DIGI Adaptor for Yaesu FT-817/818 Series Transceivers

shufps/vfd-night-projector-clock
The VFD Night Projector Clock is the first and only (at the moment and to my knowledge 😁) night projecting clock that uses a VFD display.


95lux/aware01
Aarebot is a dynamic realtime sampler built as a Eurorack module. At its core is a stereo tape-style engine with a hot-swapping record/playback buffer - this enables to record and play simultaneously.

porast1/suspension-telemetry
Suspension telemetry system for mountain bike or dirt bike

It measures 61.2 × 57.9 mm and has 2 copper layers, 1.6 mm thick.
14 parts, built around the LM1117MP-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Batheusz/PCB_Oximetro repository on GitHub, at the commit this page was made from: the board is PCB_Oximetro.kicad_pcb and its schematic PCB_Oximetro.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).