2 layers28.3 × 39.8 mm
LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
21 parts5.1kGPL-3.0
2 layers
Kotel
BASM/sh_termsh_term
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 17
- Pads
- 86
- Tracks, vias
- 262, 0
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 29 Sep 2013
- Updated
- 24 Jun 2014
Overview
Kotel is an open-source printed circuit board by BASM, from the BASM/sh_term repository on GitHub, published under the MIT licence. It is a 2-layer board with 21 parts on 17 nets, routed with 262 tracks and 0 vias.
It is built around the MAX6634MSA+. Its parts include 6 resistors, 5 capacitors, 4 connectors, 3 ICs and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdsh_term
sh_term
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | R4.7 | SM1206 | R1, R3, R6, R7 |
| 2 | 0.1uF | SM0805 | C4, C6 |
| 2 | C22 | SM0805 | C1, C2 |
| 1 | 12mHz | SM1210 | X1 |
| 1 | 1k | SM1206 | R8 |
| 1 | 2.2mF | SM1812 | C5 |
| 1 | 200 | SM1206 | R2 |
| 1 | 7805 | LM78XX | U2 |
| 1 | ATMEGA328P-TQFP32 | TQFP32 | IC1 |
| 1 | LED | LED-0805 | D1 |
| 1 | MAX6634 | SO8E | U1 |
| 1 | MOS_N | SOT23GDS | Q1 |
| 1 | Power | SIL-2 | P1 |
| 1 | RELE CONNECTOR | SIL-2 | P2 |
| 1 | TWI SW | SIL-4 | P4 |
| 1 | UART_RST | SIL-5 | P3 |
Questions
What parts does the Kotel use?
21 parts, built around the MAX6634MSA+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Kotel KiCad files?
From the BASM/sh_term repository on GitHub, at the commit this page was made from: the board is circuts/kotel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Kotel design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers171.2 × 72.9 mm
Amiga gfxcard before pour
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
21 parts1k - 2 layers93.9 × 46 mm
- 2 layers45.5 × 42.9 mm
Esphome han reader
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
21 parts915 - 2 layers31.8 × 14.5 mm
Esp prog
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
21 parts744MIT - 2 layers23.5 × 15.8 mm
QuiverAttachPCB
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
21 parts617CERN-OHL-S-2.0 - 2 layers69.9 × 41.3 mm
- 2 layers161.3 × 111.8 mm
