

CabControlPWM
- Size
- 38 × 43.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 16
- Pads
- 91
- Tracks, vias
- 197, 84
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Mar 2023
- Updated
- 20 May 2026
Overview
CabControlPWM is an open-source printed circuit board by bask185, from the bask185/Train-Science-DIY repository on GitHub. It is a 2-layer board of 38 × 43.5 mm with 35 parts on 16 nets, routed with 197 tracks and 84 vias.
It is built around the ATTINY85-20SU, 1N4148WS and AO3400A. Its parts include 9 capacitors, 8 resistors, 4 diodes, 4 connectors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATTINY85-20SU
SOIC-8-208mil-40℃~+85℃ 10bit 2.7V~5.5V 20MHz 512Byte 512Byte 6 8 Bit 8KB AVR Built-in FLASH SOIC-8-208mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)1N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching DiodesAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nF | Capacitor_SMD:C_0402_1005Metric | C201, C401, C402, C501 |
| 3 | 0R1 | Resistor_SMD:R_1206_3216Metric | R501, R502, R503 |
| 2 | 1N4148WS | Diode_SMD:D_SOD-323 | D501, D502 |
| 2 | 470uF | Capacitor_SMD:CP_Elec_8x10 | C304, C305 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C302 |
| 1 | 100uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C303 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R201 |
| 1 | 220R | custom_kicad_lib_sk:R_0603_smalltext | R301 |
| 1 | 22R | custom_kicad_lib_sk:R_0603_smalltext | R505 |
| 1 | 22k | custom_kicad_lib_sk:R_0603_smalltext | R504 |
| 1 | 330nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C301 |
| 1 | 680R | custom_kicad_lib_sk:R_0603_smalltext | R202 |
| 1 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q501 |
| 1 | ATtiny85-20S | Package_SO:SOIC-8W_5.3x5.3mm_P1.27mm | U201 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J201 |
| 1 | D | Diode_SMD:D_SMA | D401 |
| 1 | G6K-2F-Y-TR DC12 | Relay_SMD:Relay_DPDT_Omron_G6K-2F-Y | K501 |
| 1 | Jack-DC | Connector_BarrelJack:BarrelJack_Horizontal | J301 |
| 1 | L78L05_SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U301 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D201 |
| 1 | RJ12 | custom_kicad_lib_sk:RJ12 | J401 |
| 1 | Screw_Terminal_01x02 | Connector_Phoenix_MC:PhoenixContact_MC_1,5_2-G-3.5_1x02_P3.50mm_Horizontal | J501 |
| 1 | default_switch | custom_kicad_lib_sk:default_switch | SW201 |
The 30 most common of 35 parts.
More from bask185/Train-Science-DIY
12- 2 layers75 × 106.5 mm

- 2 layers68.5 × 130.5 mm

- 2 layers153.2 × 127.5 mm

- 2 layers54.5 × 73 mm

- 2 layers99.5 × 61 mm

- 4 layers70 × 83.5 mm

- 2 layers105.5 × 63.5 mm

- 2 layers78 × 58.5 mm

- 2 layers83.5 × 50.3 mm

- 2 layers81 × 71.2 mm

- 2 layers54 × 94.5 mm

- 2 layers100 × 45 mm

Similar boards
- 2 layers

- 2 layers

Tx kick
ngalin/JillTrak
Open-source replacement collar for Deben ferret finders, compatible with existing Deben receivers.
22 parts - 4 layers140 × 100 mm

Dc usv
TobleMiner/DC-UPS
A small DC UPS, designed to keep small appliances like consumer network equipment running during power outages
351 parts223CERN-OHL-P-2.0 - 4 layers118 × 117 mm

Cm4-robot
Twisted-Fields/acorn-robot-electronics
PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.
268 parts81 - 4 layers55 × 100.5 mm

OSS Radio Hardware Design
Arkos-Engineering/HT-15_hardware
We can split this out into separate repos later, right now its very convenient to have everything here.
256 parts72 - 4 layers41.4 × 108 mm

- 2 layers

- 4 layers115.5 × 96.2 mm

Closed deck x4
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
245 parts19
Questions
How big is the CabControlPWM PCB?
It measures 38 × 43.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CabControlPWM use?
35 parts, built around the ATTINY85-20SU, 1N4148WS and AO3400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CabControlPWM KiCad files?
From the bask185/Train-Science-DIY repository on GitHub, at the commit this page was made from: the board is PCB_SOURCE/CabControlPWM/CabControlPWM.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CabControlPWM design in my own project?
Its repository states no licence, so its author keeps all rights: ask bask185 before reusing the design.