

TrainCatcher
- Size
- 55.5 × 55 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 60
- Nets
- 58
- Pads
- 197
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Mar 2023
- Updated
- 20 May 2026
Overview
TrainCatcher is an open-source printed circuit board by bask185, from the bask185/Train-Science-DIY repository on GitHub. It is a 2-layer board of 55.5 × 55 mm with 60 parts on 58 nets.
It is built around the ATMEGA328-AU, EL814 and SS53, with the AO3400A among its other parts. Its parts include 15 resistors, 10 capacitors, 10 diodes, 7 connectors and 5 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4ATMEGA328-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)EL814
DIP-4-55℃~+110℃ 1.2V 11us 20% 200mW 300% 50mV@20mA,1mA 5kV 60mA 7us@2mA,100Ω 80V AC,DC Phototransistor DIP-4 Transistor, Photovoltaic Output Optoisolators ROHSEverlight ElectronicsTransistor, Photovoltaic Output OptoisolatorsSS53
SMA(DO-214AC)-55℃~+150℃ 1 Independent 100A 200uA@30V 30V 550mV@5A 5A SMA(DO-214AC) Schottky Diodes ROHSDIYI Elec TechSchottky Barrier Diodes (SBD)AO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
Parts
60| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C202, C301, C701, C901, C1201 |
| 6 | SS53 | Diode_SMD:D_SMA | D5, D6, D8, D10, D1201, D1401 |
| 3 | 22R | custom_kicad_lib_sk:R_0603_smalltext | R13, R1201, R1401 |
| 3 | 22k | custom_kicad_lib_sk:R_0603_smalltext | R12, R1202, R1402 |
| 3 | 2A bridge | Diode_SMD:Diode_Bridge_Diotec_ABS | D2, D3, D4 |
| 3 | 47R | custom_kicad_lib_sk:R_0603_smalltext | R3, R4, R5 |
| 3 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q3, Q1201, Q1401 |
| 3 | EL814 | Package_DIP:SMDIP-4_W9.53mm | U26, U27, U28 |
| 3 | Screw_Terminal_01x03 | Connector_Phoenix_MC:PhoenixContact_MC_1,5_3-G-3.5_1x03_P3.50mm_Horizontal | J601, J1401, J1601 |
| 2 | 0R1 | Resistor_SMD:R_1206_3216Metric | R8, R1203 |
| 2 | 10k | Potentiometer_THT:Potentiometer_Runtron_RM-065_Vertical | RV701, RV901 |
| 2 | 12pF | Capacitor_SMD:C_0603_1608Metric | C302, C303 |
| 2 | 1k5 | custom_kicad_lib_sk:R_0603_smalltext | R15, R1601 |
| 2 | NPN_TOR | Package_TO_SOT_SMD:SOT-23 | Q4, Q1601 |
| 1 | 100uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C203 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R302 |
| 1 | 330nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C201 |
| 1 | 6k2 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R301 |
| 1 | ATmega328-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U301 |
| 1 | Conn_01x06_Pin | custom_kicad_lib_sk:connector_3.50mm_6P horizontal_MALE | J1101 |
| 1 | Conn_01x06_Socket | Connector_Phoenix_MC:PhoenixContact_MC_1,5_6-G-3.5_1x06_P3.50mm_Horizontal | J1301 |
| 1 | Crystal_GND2 | custom_kicad_lib_sk:crystal_arduino | Y301 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J301 |
| 1 | L78L05_SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U201 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D301 |
| 1 | SW_DIP_x06 | Button_Switch_SMD:SW_DIP_SPSTx05_Slide_Omron_A6S-510x_W8.9mm_P2.54mm | SW1501 |
| 1 | Screw_Terminal_01x02 | Connector_Phoenix_MC:PhoenixContact_MC_1,5_2-G-3.5_1x02_P3.50mm_Horizontal | J3 |
The 56 most common of 60 parts.
More from bask185/Train-Science-DIY
12- 2 layers75 × 106.5 mm

- 2 layers68.5 × 130.5 mm

- 2 layers153.2 × 127.5 mm

- 2 layers54.5 × 73 mm

- 2 layers99.5 × 61 mm

- 4 layers70 × 83.5 mm

- 2 layers105.5 × 63.5 mm

- 2 layers78 × 58.5 mm

- 2 layers83.5 × 50.3 mm

- 2 layers81 × 71.2 mm

- 2 layers54 × 94.5 mm

- 2 layers100 × 45 mm

Similar boards
- 2 layers54.5 × 73 mm

OS servo decoder-8
Open-Source-Model-Railway-Electronics/OS-Servo-Decoder
The OS-Servo-Decoder is a simple and robust DCC accessory decoder designed for driving up to 8 servo motors. It supports modern model railroads with flexible configuration options, external relay modules for polarity…
79 parts - 2 layers

- 2 layers

- 2 layers96.8 × 81.5 mm

- 2 layers91.8 × 23.6 mm

- 2 layers85.1 × 85.1 mm

- 2 layers50 × 100 mm

Airtap
ajkumar-1907/POWER-ELECTRONICS-LIB
Open-source library of power electronics converter topologies — KiCad schematics, working principles, use cases, and design notes for DC-DC, AC-DC, DC-AC, and AC-AC converters. Free to use, modify, and build on.
62 parts1MIT - 2 layers70 × 60 mm

Questions
How big is the TrainCatcher PCB?
It measures 55.5 × 55 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TrainCatcher use?
60 parts, built around the ATMEGA328-AU, EL814, SS53 and AO3400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TrainCatcher KiCad files?
From the bask185/Train-Science-DIY repository on GitHub, at the commit this page was made from: the board is PCB_SOURCE/blockModules/analog/trainCatcher PCB/trainCatcherSMD/trainCatcher.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TrainCatcher design in my own project?
Its repository states no licence, so its author keeps all rights: ask bask185 before reusing the design.