

RelayHat
- Size
- 81.5 × 16.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 26
- Pads
- 81
- Tracks, vias
- 172, 12
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Mar 2023
- Updated
- 20 May 2026
Overview
RelayHat is an open-source printed circuit board by bask185, from the bask185/Train-Science-DIY repository on GitHub. It is a 2-layer board of 81.5 × 16.5 mm with 18 parts on 26 nets, routed with 172 tracks and 12 vias.
It is built around the ATTINY85-15M, 74HC595 and LM7805. Its parts include 4 capacitors, 4 resistors, 4 ICs, 3 connectors and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATTINY85-15M
WQFN-20-EP(4x4)-40℃~+85℃ 16MHz 2.7V~5.5V 512Byte 512Byte 6 8 Bit 8KB AVR Built-in FLASH WQFN-20-EP(4x4) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontroller Units (MCUs/MPUs/SOCs)74HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift RegistersLM7805
TO-2630℃~+125℃ 1 1A 20V 2V 42uV 5V 62dB@(120Hz) 8mA Fixed Over Temperature Protection、Short Circuit Protection Positive TO-263 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSYONGYUTAIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100nf | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C2, C3, C4 |
| 3 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2, R3, R4 |
| 1 | 100uf | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 1k5 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 6N137 | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | 74HC595 | Package_DIP:DIP-16_W7.62mm | U4 |
| 1 | ATtiny85 | Package_DIP:DIP-8_W7.62mm | U3 |
| 1 | Conn_01x10_Socket | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J2 |
| 1 | D_Bridge_+A-A | Diode_THT:Diode_Bridge_Round_D8.9mm | D1 |
| 1 | D_Small | Diode_THT:D_DO-34_SOD68_P7.62mm_Horizontal | D2 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | LM7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | Screw_Terminal_01x04 | Connector_Phoenix_MC:PhoenixContact_MC_1,5_4-G-3.5_1x04_P3.50mm_Horizontal | J1 |
| 1 | config | custom_kicad_lib_sk:SW_NO_SILK | SW1 |
More from bask185/Train-Science-DIY
12- 2 layers75 × 106.5 mm

- 2 layers68.5 × 130.5 mm

- 2 layers153.2 × 127.5 mm

- 2 layers54.5 × 73 mm

- 2 layers99.5 × 61 mm

- 4 layers70 × 83.5 mm

- 2 layers105.5 × 63.5 mm

- 2 layers78 × 58.5 mm

- 2 layers83.5 × 50.3 mm

- 2 layers81 × 71.2 mm

- 2 layers54 × 94.5 mm

- 2 layers100 × 45 mm

Similar boards
- 2 layers41.3 × 109.5 mm

Multi vu eurorack
jjradler/multi-vu-eurorack
Buffered multiple with an AVR-controlled VU meter and various available artistic panels.
130 parts1CC0-1.0 - 2 layers66 × 66 mm

Attiny85 7seg
Spac3y/seg7-85
A 4-digit 7-segment display driven by an ATtiny85, scrolling a text message across the display.
31 parts - 4 layers80 × 40 mm

ThreeMan HW
znibb/ThreeMan_HW
According to Hardware Semantic Versioning (MAJOR.MINOR.PATCH), increment: MAJOR - when changing mechanical or connector interfaces MINOR - when changing schematic or layout PATCH - when changing BOM or sourcing data
77 parts - 2 layers88.9 × 80 mm

- 2 layers68.2 × 41.8 mm

Shift register control panel
EHMD28/shift-register-control-panel
A control panel PCB for a 74HC595 8-bit SIPO shift register. The panel comes with built in inputs as well as output indicators.
33 parts - 2 layers100 × 70 mm

Red pitaya mux board
svenclawdbot-ai/acoustic-research
Multi-frequency shear wave elastography research
90 parts - 2 layers

- 2 layers108 × 57.5 mm

Questions
How big is the RelayHat PCB?
It measures 81.5 × 16.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RelayHat use?
18 parts, built around the ATTINY85-15M, 74HC595 and LM7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RelayHat KiCad files?
From the bask185/Train-Science-DIY repository on GitHub, at the commit this page was made from: the board is PCB_SOURCE/DECODERS_N_OCCUPANCY/relayHat/relayHat.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RelayHat design in my own project?
Its repository states no licence, so its author keeps all rights: ask bask185 before reusing the design.