

OSSD-8A
- Size
- 99.5 × 61 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 124
- Nets
- 77
- Pads
- 315
- Tracks, vias
- 729, 301
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Mar 2023
- Updated
- 20 May 2026
Overview
OSSD-8A is an open-source printed circuit board by bask185, from the bask185/Train-Science-DIY repository on GitHub. It is a 2-layer board of 99.5 × 61 mm with 124 parts on 77 nets, routed with 729 tracks and 301 vias.
It is built around the ATMEGA328-AU, AMS1117-5.0 and TM10N06SI, with the MB10S among its other parts. Its parts include 47 resistors, 25 diodes, 19 transistors, 11 capacitors and 10 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4ATMEGA328-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)AMS1117-5.0
SOT-223-40℃~+125℃ 1 1.3V 15V 1A 5V 60dB Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTM10N06SI
SOT-89-3L-55℃~+175℃ 1 N-channel 1.6V 10A 14nC@10V 40mΩ@10V、47mΩ@4.5V 41pF 49pF 4W 60V 725pF N-Channel SOT-89-3L MOSFETs ROHSTritech-MOSMOSFETsMB10S
MBS-55℃~+150℃ 1.1V@400mA 1A 1kV 35A 5uA@1kV Single-Phase Rectifier MBS Bridge Rectifiers ROHSMDDBridge Rectifiers
Parts
124| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 10k | custom_kicad_lib_sk:R_0603_smalltext | R3, R4, R13, R14, R23, R24, R33, R34, R43, R44, R53, R54, R63, R64, R73, R1506 +3 |
| 16 | 22R | custom_kicad_lib_sk:R_0603_smalltext | R11, R12, R21, R22, R31, R32, R41, R42, R51, R52, R61, R62, R71, R72, R81, R82 |
| 16 | TM10N06SI | Package_TO_SOT_SMD:SOT-89-3 | Q11, Q12, Q21, Q22, Q31, Q32, Q41, Q42, Q51, Q52, Q61, Q62, Q71, Q72, Q81, Q82 |
| 16 | ~ | Diode_SMD:D_SMA | D11, D12, D21, D22, D31, D32, D41, D42, D51, D52, D61, D62, D71, D72, D81, D82 |
| 8 | ~ | Connector_Phoenix_MC:PhoenixContact_MC_1,5_3-G-3.5_1x03_P3.50mm_Horizontal | J11, J21, J31, J41, J51, J61, J71, J81 |
| 6 | D | Diode_SMD:D_SMA | D501, D502, D503, D504, D1501, D1503 |
| 4 | 0R1 | Resistor_SMD:R_1206_3216Metric | R101, R102, R103, R104 |
| 3 | 2200uF | Capacitor_SMD:CP_Elec_18x17.5 | C1501, C1502, C1503 |
| 3 | NPN_TOR | Package_TO_SOT_SMD:SOT-23 | Q1501, Q1502, Q1503 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C302, C501 |
| 2 | 100nF | Capacitor_SMD:C_0402_1005Metric | C3, C101 |
| 2 | 12pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2 |
| 2 | 1R | Resistor_SMD:R_1206_3216Metric | R1503, R1504 |
| 1 | 100uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C303 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2 |
| 1 | 10k | custom_kicad_lib_sk:R_0805_handsolder-smalltext | R1501 |
| 1 | 1k | custom_kicad_lib_sk:R_0805_handsolder-smalltext | R1502 |
| 1 | 1k5 | custom_kicad_lib_sk:R_0603_smalltext | R5 |
| 1 | 330nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C301 |
| 1 | 47k | custom_kicad_lib_sk:R_0603_smalltext | R1505 |
| 1 | 6N137 | Package_SO:SOP-8_6.62x9.15mm_P2.54mm | U3 |
| 1 | 6k2 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U301 |
| 1 | ATmega328-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | Crystal_GND2 | custom_kicad_lib_sk:crystal_arduino | Y1 |
| 1 | D | Diode_SMD:D_SOD-323 | D1 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | LOGO | custom_kicad_lib_sk:Train-Science logo small | G*** |
| 1 | LOGO | custom_kicad_lib_sk:OSSD_QR | G*** |
| 1 | MB10S | Package_TO_SOT_SMD:TO-269AA | D301 |
| 1 | SW_SPST | Button_Switch_SMD:SW_SPST_SKQG_WithStem | SW1 |
| 1 | Screw_Terminal_01x04 | Connector_Phoenix_MC:PhoenixContact_MC_1,5_4-G-3.5_1x04_P3.50mm_Horizontal | J62 |
The 119 most common of 124 parts.
More from bask185/Train-Science-DIY
12- 2 layers75 × 106.5 mm

- 2 layers68.5 × 130.5 mm

- 2 layers153.2 × 127.5 mm

- 2 layers54.5 × 73 mm

- 4 layers70 × 83.5 mm

- 2 layers105.5 × 63.5 mm

- 2 layers78 × 58.5 mm

- 2 layers83.5 × 50.3 mm

- 2 layers81 × 71.2 mm

- 2 layers54 × 94.5 mm

- 2 layers100 × 45 mm

- 2 layers81 × 71.5 mm

Similar boards
- 2 layers70 × 130 mm

Frequency Generator A
joshishreyas320/Frequency-Generator-PCB-Design-KiCAD
DDS-based frequency generator PCB designed in KiCad. AD9833 waveform IC controlled by ATmega328A over SPI generates sine, triangle, and square waves.
37 parts - 2 layers82 × 94 mm

LIBV
LIBVproject/LIBV-ventilator-pcb
Low Resource Ventilator Project to fight against COVID-19.
127 partsMIT - 2 layers499.7 × 124.5 mm

Controller
VoltMusic/OB-SX-Programmer-and-Interface
This contains the Arduino code and KiCAD project file for creating a OB-SX Programmer and Interface.
157 parts - 2 layers25.4 × 25.7 mm

- 4 layers80 × 42 mm

Handle module
shm-dmitry/auto_close_window
This IOT project allows you to open and close your window from any smart house. For example - you can setup rules like a "If night and noise greater then expected -> close window" and "Noise reduced -> open window"
114 parts1Apache-2.0 - 4 layers128.5 × 40 mm

Scalenode cm4-baseboard
antmicro/scalenode-cm4-baseboard
Baseboard for Raspberry Pi 4 Compute Module optimized for clustering
146 parts152Apache-2.0 - 8 layers118 × 100 mm

Kria k26-devboard
antmicro/kria-k26-devboard
Open source AMD Xilinx Kria UltraScale+ SoM baseboard
660 parts83Apache-2.0 - 6 layers100 × 70 mm

Sa800u baseboard hw
antmicro/snapdragon-845-baseboard
https://antmicro.com/blog/2022/04/open-source-snapdragon-845-baseboard/
616 parts70Apache-2.0
Questions
How big is the OSSD-8A PCB?
It measures 99.5 × 61 mm and has 2 copper layers, 1.6 mm thick.
What parts does the OSSD-8A use?
124 parts, built around the ATMEGA328-AU, AMS1117-5.0, TM10N06SI and MB10S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the OSSD-8A KiCad files?
From the bask185/Train-Science-DIY repository on GitHub, at the commit this page was made from: the board is PCB_SOURCE/DECODERS_N_OCCUPANCY/OSSD/src/PCB/OSSD-8A/OSSD-8A.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the OSSD-8A design in my own project?
Its repository states no licence, so its author keeps all rights: ask bask185 before reusing the design.