basic-bitch-foundation/TrafficHandle bar is an open-source printed circuit board by basic-bitch-foundation, from the basic-bitch-foundation/Traffic repository on GitHub. It is a 2-layer board of 48.5 × 48.6 mm with 18 parts on 24 nets, routed with 168 tracks and 7 vias.
It is built around the XIAO ESP32C3 and WS2812B. Its parts include 6 connectors, 4 capacitors, 3 diodes, 2 resistors and 2 ICs. It belongs with the ESP32 and RISC-V boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3 |
| 2 | 4.7 | Capacitor_THT:C_Disc_D6.0mm_W2.5mm_P5.00mm | C2, C3 |
| 1 | 10uf | Capacitor_THT:C_Disc_D7.5mm_W5.0mm_P5.00mm | C1 |
| 1 | 220ko | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 22uf | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C4 |
| 1 | 2kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | BAT | solderwirepad_1_02_SMD:SolderWirePad_1x02_SMD_5x5mm | J4 |
| 1 | HRN_SW | solderwirepad_1_02_SMD:SolderWirePad_1x02_SMD_5x5mm | J3 |
| 1 | MAX98357A 3V3 | solderwirepad_1_02_SMD:SolderWirePad_1x07_SMD_1x3mm | J2 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | PS2 | solderwirepad_1_02_SMD:SolderWirePad_1x05_SMD_1x3mm | J5 |
| 1 | PWR_SLIDE | solderwirepad_1_02_SMD:SolderWirePad_1x02_SMD_5x5mm | J3 |
| 1 | SW_SPST | solderwirepad_1_02_SMD:SolderWirePad_1x02_SMD_5x5mm | PWR1 |
| 1 | USB | solderwirepad_1_02_SMD:SolderWirePad_1x02_SMD_5x5mm | J6 |
| 1 | XIAO_ESP32C3 | XIAO_ESP32C3:MODULE_XIAO_ESP32C3 | U1 |
It measures 48.5 × 48.6 mm and has 2 copper layers, 1.6 mm thick.
18 parts, built around the XIAO ESP32C3 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the basic-bitch-foundation/Traffic repository on GitHub, at the commit this page was made from: the board is handle_bar/handle_bar.kicad_pcb and its schematic handle_bar/handle_bar.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask basic-bitch-foundation before reusing the design.
AID-IOT/IOT-Memento-Design
A keepsake PCB built at the AICTE IDEA Lab, Poornima College of Engineering. It is a working board as well as a memento: a Seeed XIAO ESP32C3 drives four WS2812B LEDs and reads a BMP280 pressure/temperature sensor, and…
slogic3d-cloud/heart
Ein herzförmiges PCB mit 46 RGB-LEDs (WS2812B), das eine Lichtshow abspielt. Ein Taster auf der Rückseite schaltet zwischen den Effekten um, Strom kommt per USB-C.
0rax/esphome-xiao-base
XIAO base board PCB & configuration for ESPHome based sensors.
