

Esp32 wled hub
- Size
- 70 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 40
- Pads
- 118
- Tracks, vias
- 77, 5
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 21 Sep 2022
- Updated
- 17 Jan 2025
Overview
Esp32 wled hub is an open-source printed circuit board by bartlammers, from the bartlammers/esp32_wled_hub repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 70 × 60 mm with 13 parts on 40 nets, routed with 77 tracks and 5 vias.
It is built around the 74LS125DC. Its parts include 5 connectors, 2 ICs and 1 capacitor. It belongs with the ESP32 boards of this library.
Main components
1Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 1 | 1000uF | Capacitor_THT:C_Radial_D10.0mm_H16.0mm_P5.00mm | C1 |
| 1 | 74LS125 | ESP32_Wled_hub:SOIC-14-DIP-14-combo | U1 |
| 1 | ESP32-DEVKITC-32D | ESP32-DEVKITC-32D:MODULE_ESP32-DEVKITC-32D | U2 |
| 1 | LOGO | ESP32_Wled_hub:VoronLogo_20mm_silkScreen | G*** |
| 1 | OUT 1 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J4 |
| 1 | OUT 2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J6 |
| 1 | OUT 3 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J5 |
| 1 | OUT 4 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J7 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
Similar boards
- 2 layers231.1 × 106.7 mm

- 2 layers98 × 38 mm

Bldc control ver3
pekkaroi/bldc-drive
Cheap and simple brushless DC motor driver designed for CNC applications using STM32 microcontroller
68 parts199GPL-2.0 - 2 layers40 × 100 mm

Back pcb
ZeroPhone/ZeroPhone-PCBs
PCB files for ZeroPhone - for gerbers and schematics, go to "Releases" tab!
118 parts148GPL-3.0 - 2 layers128.3 × 50.8 mm

CD32 Controller
BleuLlama/AmigaSchematics
Schematics of various Commodore Amiga related items
33 parts58MIT - 4 layers337.6 × 105.7 mm

ISA CGA
hkzlab/CGA_Redux
The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics
170 parts56 - 2 layers170.2 × 100 mm

Z80-SBC
skiselev/zeta_sbc
Zeta SBC is an Zilog Z80 based single board computer. It is inspired by Ampro Little Board Z80 and N8VEM project. Zeta SBC is software compatible with RomWBW Firmware
75 parts53GPL-3.0 - 2 layers68.6 × 53.3 mm

Fdshield
yas-sim/floppy_disk_shield_2d
This is a project to retain 2D/2DD floppy disk data as a raw bit-stream data. The project includes both HW and SW.
30 parts49Apache-2.0 - 4 layers231.1 × 340.4 mm

Sun3 60 layout2 routing2
54weasels/sun3_60
Notes on each section: - CPU - 68030 support left out entirely - 68881 in the schematics but left out of the PCB - MMU - U2001 which would be needed to support any video, either P4 or built-in not in the PCB - U314…
225 parts35
Questions
How big is the Esp32 wled hub PCB?
It measures 70 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp32 wled hub use?
13 parts, built around the 74LS125DC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp32 wled hub KiCad files?
From the bartlammers/esp32_wled_hub repository on GitHub, at the commit this page was made from: the board is ESP32_Wled_hub.kicad_pcb and its schematic ESP32_Wled_hub.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp32 wled hub design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).