Skip to the content
2 layers65.8 × 38.5 mmSms cartridge basic, the printed circuit board in 3D

A simple cartridge PCB for making Sega Master System (US) games that don't use a mapper

Size
65.8 × 38.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
48
Pads
86
Tracks, vias
184, 36
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
20 Jan 2023
Updated
4 Mar 2025

Overview

Sms cartridge basic is an open-source printed circuit board by barbeque, from the barbeque/sms-u-simple-cartridge repository on GitHub. It is a 2-layer board of 65.8 × 38.5 mm with 6 parts on 48 nets, routed with 184 tracks and 36 vias.

It is built around the 27C256-17/J. Its parts include 2 ICs and 1 capacitor. It belongs with the retro computing and games boards of this library.

Main components

1

README

README.md

SMS-U Simple

A PCB for Sega Master System games. It's "simple" because it does not include any mapper (page switching, save RAM) logic, which means it only supports most Sega games up to 48K.

Note that this will not work on a Mark III/Japanese Master System; that system's pinout and cartridge shape is totally different.

Current Status

In development

Tested With

  • Snail Maze ROM hack

Bill of Materials

  • PCB
  • (E)EPROM containing your software - 27c64, up to 27c256. 27c512 may work, but only the lower half of the ROM will be accessible.
  • 0.1uF through-hole bypass capacitor

Assembly Instructions

  1. Submit the gerbers from the Releases page to a PCB fabricator. Suggested settings: gold fingers (ENIG or ideally hard gold,) 45 degree bevel.
  2. If you didn't get edge connector beveling (45-degree fingers) from your PCB fabricator, it may make sense to do the beveling yourself with a sanding block.
  3. Place components onto board. If you are socketing your ROM, the socket may add too much additional height and keep a stock case from fitting.
  4. If you are using a 27c64 for your EPROM (rare,) cut the A14 jumper in the top right of the board and connect the +5V jumper instead. Verify with a multimeter.

Parts

6
QtyValueFootprintReferences
2Jumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP2, JP3
10.1µFCapacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mmC1
127C256Package_DIP:DIP-28_W15.24mmU1
1Jumper_2_BridgedJumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP1
1SMSUCartEdgeMasterSystem:SMS_CartridgeU2

Similar boards

  • 4 layers184.9 × 243.8 mmProject NuXT, the printed circuit board in 3D

    Project NuXT

    monotech/NuXT

    MicroATX Turbo XT Motherboard, with VGA, Floppy, CF, Serial

    223 parts121GPL-3.0
  • 2 layers104.1 × 87.6 mmIsa svga, the printed circuit board in 3D

    Isa svga

    skiselev/isa-super-vga

    Trident TVGA9000i based Super VGA board

    62 parts81
  • 2 layers237.7 × 146.1 mmTipi peb, the printed circuit board in 3D

    Tipi peb

    jedimatt42/tipi

    TI-99/4A to Raspberry PI messaging through console sideport

    51 parts77
  • 4 layers318.4 × 124.5 mmN2360, the printed circuit board in 3D

    N2360

    jasonsbeer/Amiga-N2630

    A re-imagining of the Amiga A2630 processor card.

    248 parts69
  • 2 layers100 × 77.5 mmSmartDiskII, the printed circuit board in 3D

    SmartDiskII

    btb/SmartDiskII

    An hybrid Disk ][ and SmartPort controller

    42 parts60Apache-2.0
  • 4 layers337.6 × 105.7 mmISA CGA, the printed circuit board in 3D

    ISA CGA

    hkzlab/CGA_Redux

    The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics

    170 parts56
  • 2 layers162.2 × 134.6 mmSg1000, the printed circuit board in 3D

    Sg1000

    barbeque/sg1000

    A homebrew Sega SG-1000, with an eye towards SC-3000 compatibility

    89 parts33
  • 2 layers20.3 × 47.6 mmC64-Kernal Switcher, the printed circuit board in 3D

    C64-Kernal Switcher

    tebl/C64-Kernal-Switcher

    Switchless kernal switcher for the common breadbin Commodore 64, "longboards". Reuses power LED for easier use.

    12 parts33

Questions

How big is the Sms cartridge basic PCB?

It measures 65.8 × 38.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Sms cartridge basic use?

6 parts, built around the 27C256-17/J. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Sms cartridge basic KiCad files?

From the barbeque/sms-u-simple-cartridge repository on GitHub, at the commit this page was made from: the board is sms-cartridge-basic.kicad_pcb and its schematic sms-cartridge-basic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Sms cartridge basic design in my own project?

Its repository states no licence, so its author keeps all rights: ask barbeque before reusing the design.