
S100 ColorMagic-1.1-006
RichCini/LomasBoards
Small repository of files/data related to Lomas Data Products S-100 boards.

Z80 SoftCard clone for Apple II
A2card template is an open-source printed circuit board by barbeque, from the barbeque/apple-ii-softcard repository on GitHub. It is a 2-layer board of 158.8 × 76.4 mm with 19 parts on 130 nets, routed with 8 tracks and 0 vias.
It is built around the 74LS367PC, 74LS373SC and 74LS74PC, with the 74LS00SC, 74LS32SC and 74LS86 among its other parts. Its parts include 12 ICs, 3 resistors, 1 diode and 1 switch. It belongs with the retro computing and games boards of this library.
First version in development. Please check back later.
plpg created the original board edge and connector, which got the project off to a great start. Thank you!
Patrick Schäfer created a cleaned-up version of the official Microsoft schematics (docs/apple_schematics_softcard.pdf in this repo.)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 74LS367 | Package_DIP:DIP-16_W7.62mm | U9, U14, U16, U17 |
| 2 | 74LS74 | Package_DIP:DIP-14_W7.62mm | U5, U6 |
| 1 | 10kΩ | Resistor_THT:R_Array_SIP9 | R13 |
| 1 | 10kΩ | Resistor_THT:R_Array_SIP5 | RN9 |
| 1 | 2.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 680Ω | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8 |
| 1 | 74LS00 | Package_DIP:DIP-14_W7.62mm | U1 |
| 1 | 74LS283 | Package_DIP:DIP-16_W7.62mm | U8 |
| 1 | 74LS32 | Package_DIP:DIP-14_W7.62mm | U3 |
| 1 | 74LS373 | Package_DIP:DIP-20_W7.62mm | U15 |
| 1 | 74LS86 | Package_DIP:DIP-14_W7.62mm | U7 |
| 1 | Connector_Apple-Apple_ii_68008-cache | Apple_ii_card:AppleII_card_edge | BUS1 |
| 1 | LED | LED_THT:LED_D5.0mm | D1 |
| 1 | PLCCZ80 | Package_LCC:PLCC-44_THT-Socket | U10 |
| 1 | SW_DIP_x04 | Button_Switch_THT:SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mm | S1 |

RichCini/LomasBoards
Small repository of files/data related to Lomas Data Products S-100 boards.




misterblack1/zenith_zt1
Information gathered on the Zenith ZT-1 / ZT-10 / ZT-11 and ZTX/ZT-x-A variants

felipesanches/Itautec_I7000_KICAD
Esquemáticos do computador Itautec I-7000 G desenhados a partir de inspeção do circuito das PCBs

roberto314/EVA-1_Reproduction
Recreation of the very rare K-K Systems EVA-1 Display Adapter for the Epson HX-20 Computer

tebl/C64-CPM-Cartridge
A recreation of the CP/M cartridge for the Commodore 64.
It measures 158.8 × 76.4 mm and has 2 copper layers, 1.6 mm thick.
19 parts, built around the 74LS367PC, 74LS373SC, 74LS74PC and 74LS00SC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the barbeque/apple-ii-softcard repository on GitHub, at the commit this page was made from: the board is a2card_template.kicad_pcb and its schematic a2card_template.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask barbeque before reusing the design.