
Hbridge
BalderHolst/linefollower
The goal was to drive around the track as quickly as possible.

The goal was to drive around the track as quickly as possible.
Linefollower is an open-source printed circuit board by BalderHolst, from the BalderHolst/linefollower repository on GitHub. It is a 2-layer board with 6 parts on 16 nets, routed with 95 tracks and 1 via.
It is built around the 74HC4051. Its parts include 3 connectors, 2 resistors and 1 IC.
This project was developed while teaching 1. semester robotics students at SDU to see what I achieve with the same robots as the students.
The goal was to drive around the track as quickly as possible.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5, J6 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11 |
| 1 | 150 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R12 |
| 1 | 74HC4051 | Package_DIP:DIP-16_W7.62mm_Socket | U2 |
| 1 | Conn_01x07_Pin | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J3 |

BalderHolst/linefollower
The goal was to drive around the track as quickly as possible.

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

eddyem/stm32samples
Code samples and ready projects based on bare-metal STM32




sporkus/le_capybara_keyboard
Capactive sensing (EC) pcb for Le Chiffre keyboard

ginjake/ec_helix_build
商用利用したい場合は twitter @sirojake にご相談ください please contact me for commercial use. ## developer ginjake

6 parts, built around the 74HC4051. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the BalderHolst/linefollower repository on GitHub, at the commit this page was made from: the board is kicad/kicad.kicad_pcb and its schematic kicad/kicad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask BalderHolst before reusing the design.