
Back Panel Board
baldengineer/WiFi9600-Modem
Retro-cyling a Practical Peripherals 9600SA into a WiFiModem

Retro-cyling a Practical Peripherals 9600SA into a WiFiModem
Front Panel Driver is an open-source printed circuit board by baldengineer, from the baldengineer/WiFi9600-Modem repository on GitHub, published under the MIT licence. It is a 2-layer board of 57.7 × 27.7 mm with 33 parts on 47 nets, routed with 268 tracks and 47 vias.
It is built around the 74HCT245, 74HCT595D and 74HCT74D. Its parts include 6 resistors, 5 capacitors, 4 ICs, 3 connectors and 2 transistors.
Retro-cyling a Practical Peripherals 9600SA into a WiFiModem
Design files and code for WiFi9600.
As a kid, I had a Practical Peripherals 9600SA. For years I used it to connect to BBSes and then the Internet. At least, until I upgraded to a 56K USR Sportser.
This project removes the original electronics and replaces them with an ESP8266, MP3 Player, and some relays. It allows classic computers with a RS-232 port to connect to the internet via telnet.
The MP3 player enables authentic fake modem sounds. And the relays are there for authentic real clicky-clicks.
Live stream archive of the project work is available here: https://www.twitch.tv/baldengineer/videos
Watch the stream and help out in chat here: https://twitch.tv/baldengineer
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C5 |
| 5 | 4k7 | Resistor_SMD:R_0805_2012Metric | R1, R3, R4, R5, R6 |
| 2 | 74HCT595 | Package_SO:SO-16_3.9x9.9mm_P1.27mm | U2, U3 |
| 2 | P-NMOS | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 74HCT245 | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U4 |
| 1 | 74HCT74 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U5 |
| 1 | Clock | My Libraries:Harwin-S1751-46-Test-Point | TP4 |
| 1 | Data | My Libraries:Harwin-S1751-46-Test-Point | TP3 |
| 1 | Front_Panel | My Libraries:Edge_10mil_2x10 | J9 |
| 1 | G*** | My Libraries:BE5 | svg2mod |
| 1 | Latch | My Libraries:Harwin-S1751-46-Test-Point | TP5 |
| 1 | PWR_HDR | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J10 |
| 1 | SH_HDR | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J11 |
| 1 | TP_14_VCC | My Libraries:Harwin-S1751-46-Test-Point | TP7 |
| 1 | TP_244_VCC | My Libraries:Harwin-S1751-46-Test-Point | TP2 |
| 1 | TP_74_Data | My Libraries:Harwin-S1751-46-Test-Point | TP6 |
| 1 | TP_GND1 | My Libraries:Harwin-S1751-46-Test-Point | TP9 |
| 1 | TP_GND2 | My Libraries:Harwin-S1751-46-Test-Point | TP10 |
| 1 | TP_Panel_EN | My Libraries:Harwin-S1751-46-Test-Point | TP1 |
| 1 | TP_VCC | My Libraries:Harwin-S1751-46-Test-Point | TP8 |
The 31 most common of 33 parts.

baldengineer/WiFi9600-Modem
Retro-cyling a Practical Peripherals 9600SA into a WiFiModem

baldengineer/WiFi9600-Modem
Retro-cyling a Practical Peripherals 9600SA into a WiFiModem



schlae/snark-barker-mca
A Sound Blaster compatible sound card for Micro Channel bus computers

polpo/imagescribbler
A Clone of Apple's ImageWriter II/LQ LocalTalk Option card



roberto314/EVA-1_Reproduction
Recreation of the very rare K-K Systems EVA-1 Display Adapter for the Epson HX-20 Computer

michaelkamprath/minimal-64x4-expansion-cards
A set of expansion boards for the Minimal 64x4 Home Computer
It measures 57.7 × 27.7 mm and has 2 copper layers, 1.6 mm thick.
33 parts, built around the 74HCT245, 74HCT595D and 74HCT74D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the baldengineer/WiFi9600-Modem repository on GitHub, at the commit this page was made from: the board is KiCad Design Files/Front Panel Driver/Front Panel Driver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).