2 layers299 × 82.5 mm
PixelWave
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
663 parts915
2 layers299 × 82.5 mm
PixelWave
Badbird5907/PixelWave- Size
- 299 × 82.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 663
- Nets
- 379
- Pads
- 2,078
- Tracks, vias
- 3,294, 749
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Apr 2025
- Updated
- 30 Apr 2025
Overview
PixelWave is an open-source printed circuit board by Badbird5907, from the Badbird5907/PixelWave repository on GitHub. It is a 2-layer board of 299 × 82.5 mm with 663 parts on 379 nets, routed with 3,294 tracks and 749 vias.
It is built around the ESP32-S3-WROOM-1-N8, XL4016E1 and HT7533-1, with the SK6812, STL6P3LLH6 and 1N5819W among its other parts. Its parts include 321 capacitors, 315 diodes, 17 resistors, 5 ICs and 2 transistors. It belongs with the ESP32 boards of this library.
Main components
8
ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
XL4016E1
TO-220-5-40℃~+125℃ 1 1.25V~32V 12A 144kHz~216kHz 2.1mA 8V~36V Adjustable Buck Buck Built-in No TO-220-5 DC-DC Converters ROHSXLSEMIDC-DC Converters
HT7533-1
SOT-23-5-40℃~+85℃@(Ta) 1 100mA 2.5uA 25mV@(1mA) 3.3V 30V Fixed Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHOLTEKVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
SK6812
SMD-4P,5.4x5mm-40℃~+85℃ 0.6mA 1.6mm 120° 160mcd~320mcd 1kHz 2000V 280mcd~515mcd 3.7V~5.5V 460nm~470nm 520nm~530nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Built-in power-on reset circuit Semi-transparent lens SMD-4P,5.4x5mm RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
STL6P3LLH6
PowerFLAT-8(3.3x3.3)1 P-Channel 1.45nF 120pF 12nC@24V 1V 2.9W 30V 30mΩ@10V 6A PowerFLAT-8(3.3x3.3) MOSFETs ROHSSTMicroelectronicsMOSFETs
1N5819W
SOD-12313A 350mA 40V 5uA@30V 600mV@200mA Standalone SOD-123 Schottky Diodes ROHSJSMSEMISchottky Diodes
ESDA5V3L
SOT-23-40℃~+125℃@(Tj) 15A@2.5us 2 220pF 2uA 300W 3V 5.3V 5.3V ESD IEC 61000-4-2 Unidirectional SOT-23 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)
MBR1545
TO-220-2-55℃~+150℃ 1 Independent 15A 1mA@45V 240A 45V 700mV@15A TO-220-2 Schottky Diodes ROHSSMCSchottky Diodes
Parts
663| Qty | Value | Footprint | References |
|---|---|---|---|
| 310 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C10, C11, C100, C101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C111, C112 +294 |
| 310 | SK6812 | Components:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112, D113, D114, D115 +294 |
| 4 | 1uF | Capacitor_SMD:C_1206_3216Metric | C312, C313, C314, C315 |
| 3 | 100k | Resistor_SMD:R_1206_3216Metric | R6, R10, R15 |
| 3 | 1uF | Capacitor_SMD:C_0805_2012Metric | C318, C319, C320 |
| 3 | 4.7k | Resistor_SMD:R_1206_3216Metric | R5, R9, R18 |
| 2 | 10k | Resistor_SMD:R_1206_3216Metric | R7, R13 |
| 2 | 1k | Resistor_SMD:R_1206_3216Metric | R4, R17 |
| 2 | NC | Resistor_SMD:R_1206_3216Metric | R11, R12 |
| 2 | STL6P3LLH6 | Components:STL6P3LLH6 | Q1, Q2 |
| 2 | ~ | Components:DFN1610-2_L1.6-W1.0-P1.05-RD | D1, D4 |
| 1 | 100 | Resistor_SMD:R_1206_3216Metric | R16 |
| 1 | 1000uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C321 |
| 1 | 100nF | Capacitor_SMD:C_1206_3216Metric | C316 |
| 1 | 1N5819W | Diode_SMD:D_SOD-323 | D2 |
| 1 | 22k | Resistor_SMD:R_0805_2012Metric | R14 |
| 1 | 3.3k | Resistor_SMD:R_1206_3216Metric | R8 |
| 1 | 330 | Resistor_SMD:R_1206_3216Metric | R3 |
| 1 | 4.7uF | Capacitor_SMD:C_1206_3216Metric | C311 |
| 1 | 470 | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | 470uF/50V | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C317 |
| 1 | 47uH/12A | Components:IND-TH_L33.0-W15.6-P15.00-D1.5 | L1 |
| 1 | Conn_01x06 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J1 |
| 1 | ESDA5V3L | Package_TO_SOT_SMD:SOT-23-3 | D3 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U3 |
| 1 | HT7533-1 | Package_TO_SOT_SMD:SOT-89-3 | U1 |
| 1 | MBR1545 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | D5 |
| 1 | STUSB4500QTR | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm | U5 |
| 1 | XL4016 | Components:TO-220-5L_L10.2-W4.5-P1.71-L | U4 |
| 1 | ~ | Components:USB-C-SMD_G-SWITCH_GT-USB-7010ASV | U2 |
| 1 | ~ | Components:SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL_H1.5 | SW1 |
Questions
How big is the PixelWave PCB?
It measures 299 × 82.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PixelWave use?
663 parts, built around the ESP32-S3-WROOM-1-N8, XL4016E1, HT7533-1 and SK6812. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PixelWave KiCad files?
From the Badbird5907/PixelWave repository on GitHub, at the commit this page was made from: the board is PCB/PixelWave.kicad_pcb and its schematic PCB/PixelWave.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PixelWave design in my own project?
Its repository states no licence, so its author keeps all rights: ask Badbird5907 before reusing the design.
Similar boards
- 2 layers120 × 100 mm
- 2 layers73.2 × 99.1 mm
EVAL SCS001V1
eguerm-png/usb-C-STUSB4500
This is the evaluation board for the STUSB4500, based on the datasheet in /datasheets/DBeval-scs001v1.pdf.
25 partsMIT - 4 layers66.8 × 150 mm
Cooee Big brains
DetectiveMittens/Cooee
An open-source phone that can operate without GSM or LTE coverage. Utilising LoRa modulation and mesh networking to enable long range "off-grid" communication
200 parts3GPL-2.0 - 2 layers25.6 × 44.5 mm
Esp32-chungus lipo
ayan4m1/esp-chungus
Chungus is an ESP32-S3 development board created as a learning exercise in KiCad.
27 parts2MIT - 2 layers81 × 62 mm
LoRaESP32
Sosenteam/LoRa-ESP32-Pager
This is a ESP-32 and SX1262 based pager, It contains full battery charging and management as well as an input keypad and encoder. It uses a 0.96" Oled (SSD1306).
61 parts - 2 layers
Robot MGR
rayvburn/diff_drive_mapping_robot
ROS driver for the Raspberry Pi based differential drive robot
95 parts27 - 2 layers134.5 × 70 mm
6dof
Ramahabir/6-DOF-Robotics-Arm-Dynamixel
Open-source 6-DOF robot arm controller using STM32F411, Dynamixel servos, custom KiCad PCB, PWM gripper control, data logging, and planned ESP32-C3 wireless communication.
17 parts19MIT