
Gbg pcb
gobabygocarswithjoysticks/gbg-pcb
A PCB for controlling the motors in a go baby go car with joystick control

CW iambic keyer with WPM control, radio passthrough, and 7-segment display output
Tt08 cw keyer is an open-source printed circuit board by b-etz, from the b-etz/tt08-morse-keyer repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 20.3 × 46.2 mm with 26 parts on 27 nets, routed with 148 tracks and 18 vias.
It is built around the MBT3904DW1, ASJ-200-B-HT and TS11-674-55-BK-100-RA-D, with the C5SMF-RJF-CT0W0BB1 and PS1720P02 among its other parts. Its parts include 14 resistors, 3 transistors, 3 connectors, 2 capacitors and 2 switches. It belongs with the radio and wireless boards of this library.
Tiny Tapeout is an educational project that aims to make it easier and cheaper than ever to get your digital and analog designs manufactured on a real chip.
To learn more and get started, visit https://tinytapeout.com.
Please see docs/info.md for a description of this project. An application schematic is shown below.
This design is a CW keyer taking paddle (Iambic) inputs and outputting dits and dahs to a radio/LED/buzzer for training and play. WPM control and Iambic/Straight key selection are done with inputs 7:4 and 0:1, respectively. It also outputs active-high LED controls for a 7-segment display on the board. This design takes advantage of input dip switches and an output seven-segment display present on the demo PCB kit provided with most Tiny Tapeout orders. For more, see: https://www.tinytapeout.com/specs/pcb/
If you'd like to use this HDL in your own system, be sure to check the I/O mappings shown in src/project.v and adjust accordingly.
The cocotb testbench is admittedly sparse. More rigorous testing has been performed with a Spartan 7 FPGA with no noticeable issues.


| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 2k2 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5, R6, R10, R11, R12, R13, R14 |
| 5 | 220R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R7, R8, R9 |
| 3 | MBT3904DW1 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q1, Q2, Q3 |
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | ASJ-200-B-HT | b-etz:ASJ-200-B-HT | J1, J2 |
| 2 | TS11-674-55-BK-100-RA-D | b-etz:TS11-674-55-BK-100-RA-D | SW1, SW2 |
| 1 | C5SMF-RJF-CT0W0BB1 | LED_THT:LED_Oval_W5.2mm_H3.8mm | D1 |
| 1 | Conn_02x06_PMOD | b-etz:PinHeader_2x06_P2.54mm_Horizontal_Flipped | J3 |
| 1 | PS1720P02 | b-etz:Buzzer_TDK_PS1720P02 | BZ1 |

gobabygocarswithjoysticks/gbg-pcb
A PCB for controlling the motors in a go baby go car with joystick control


thanassisfrank/pcb-touch-piano
A project to create a small piano style synth on a pcb with capacitive touch input, powered by a coin cell. The MCU is the Atmega328pb with firmware written in C.

Nigel-Grommen/EGB-240-Alternating-Relaxation-Oscillator
Two-tone audio alert circuit built with CD40106B Hex Schmitt Trigger ICs; PCB designed in KiCad from schematic to fabrication.



martinroger/ipodesp32
An iPod emulator for 2006-2013 BMW Mini Coopers that need Bluetooth

It measures 20.3 × 46.2 mm and has 2 copper layers, 1.63 mm thick.
26 parts, built around the MBT3904DW1, ASJ-200-B-HT, TS11-674-55-BK-100-RA-D and C5SMF-RJF-CT0W0BB1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the b-etz/tt08-morse-keyer repository on GitHub, at the commit this page was made from: the board is pcb/tt08_cw_keyer.kicad_pcb and its schematic pcb/tt08_cw_keyer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).