
Doorman
AzonInc/Doorman
ESP32-S3 based Intercom Gateway (TCS / Koch / Niko / Scantron / Analogue Systems)

ESP32-S3 based Intercom Gateway (TCS / Koch / Niko / Scantron / Analogue Systems)
Doorman slot programmer is an open-source printed circuit board by AzonInc, from the AzonInc/Doorman repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 33 × 32 mm with 13 parts on 12 nets, routed with 41 tracks and 32 vias.
It is built around the 70AAJ-4-M0. It belongs with the home automation and IoT and interfaces and adapters boards and the ESP32 boards of this library.
This directory contains everything PCB related. You can also find an interactive BOM here.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 70AAJ-4-M0 | footprints:70AAJ4M0 | J2, J3 |
| 1 | 3.3V TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | 5V TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | BUS TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP8 |
| 1 | Conn_01x06_Socket | Connector_PinSocket_2.54mm:PinSocket_1x09_P2.54mm_Horizontal | J1 |
| 1 | GND TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP9 |
| 1 | GPIO0 TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP10 |
| 1 | Identity TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | LED TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | RX TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | TX TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | VD TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP7 |

AzonInc/Doorman
ESP32-S3 based Intercom Gateway (TCS / Koch / Niko / Scantron / Analogue Systems)

AzonInc/Doorman
ESP32-S3 based Intercom Gateway (TCS / Koch / Niko / Scantron / Analogue Systems)

MicroCoreLabs/Projects
Ted Fried's MicroCore Labs Projects - FPGA CPU cores and emulators for the 8088, 8086, 8051, 6502, 68000, Z80, Risc-V, and also Typewriter and EPROM Emulator projects.

loxodes/vna
Under development open hardware microwave vector network analyzer


Protocentral/healthypi-move-hw
Hardware files for the HealthyPi Move


felixheld/qspimux
QSPI flash multiplexer - connect a SPI NOR flash to either an embedded system or a programmer for remote firmware tests

Unified-Daughterboard/UDB-C-EZM
For more details on the Unified Daughterboard project, see the main website.

efabless/caravel_board
This repo provides firmware examples, flash programming and diagnostic tools for testing Open MPW and chipIgnite projects using Caravel.
It measures 33 × 32 mm and has 4 copper layers, 1.6 mm thick.
13 parts, built around the 70AAJ-4-M0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AzonInc/Doorman repository on GitHub, at the commit this page was made from: the board is pcb_slot_programmer/doorman_slot_programmer.kicad_pcb and its schematic pcb/doorman.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).