
Kup lulz
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
Qsfp to arc6 is an open-source printed circuit board by azonenberg, from the azonenberg/misc-devboards repository on GitHub, published under the BSD-3-Clause licence. It is a 4-layer board of 90 × 43 mm with 45 parts on 67 nets, routed with 662 tracks and 152 vias.
It is built around the TCA6424ARGJ, ARF6-08-S-D-A-K-TR and MI0603J601R-10. Its parts include 10 capacitors, 9 resistors, 5 connectors, 4 diodes and 3 inductors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1 uF | azonenberg_pcb:EIA_0402_CAP_NOSILK | C2, C6, C7, C8 |
| 4 | 22 uF | azonenberg_pcb:EIA_1210_CAP_NOSILK | C1, C3, C4, C5 |
| 4 | 33K | azonenberg_pcb:EIA_0402_RES_NOSILK | R7, R8, R9, R10 |
| 4 | GREEN | azonenberg_pcb:EIA_0402_LED | D1, D2, D3, D4 |
| 4 | SCREWHOLE | azonenberg_pcb:MECHANICAL_CLEARANCEHOLE_4_40 | M1, M2, M3, M4 |
| 3 | 1 uH | azonenberg_pcb:EIA_0805_INDUCTOR_NOSILK | L1, L2, L3 |
| 3 | 10K | azonenberg_pcb:EIA_0402_RES_NOSILK | R1, R2, R4 |
| 3 | U.FL | azonenberg_pcb:CONN_U.FL_TE_1909763-1 | TP1, TP2, TP3 |
| 2 | 0.47 uF | azonenberg_pcb:EIA_0402_CAP_NOSILK | C9, C10 |
| 2 | 4.7K | azonenberg_pcb:EIA_0402_RES_NOSILK | R3, R5 |
| 1 | 2A | azonenberg_pcb:EIA_0603_CAP_NOSILK | F1 |
| 1 | ARF6-08-S-D-A-K-TR | azonenberg_pcb:CONN_SAMTEC_ARF6-08-S-D-A-K-TR | J1 |
| 1 | BARREL_JACK | azonenberg_pcb:CONN_CUI_PJ-058BH_HIPWR_BARREL_NOSLOT | J4 |
| 1 | CONN_QSFP_HOST | azonenberg_pcb:CONN_ZQSFP+_TE_1551920-2 | J2 |
| 1 | LOGO | w_logo:Logo_silk_ROHS_5x2.8mm | M6 |
| 1 | LOGO | azonenberg_pcb:LONGTHING-1200DPI | M5 |
| 1 | LOGO | w_logo:Logo_silk_OSHW_6x6mm | M7 |
| 1 | LOGO | w_logo:Logo_silk_WEEE_3.4x5mm | M8 |
| 1 | MI0603J601R-10 | azonenberg_pcb:EIA_0603_INDUCTOR_NOSILK | FB1 |
| 1 | PMOD_DEVICE | azonenberg_pcb:CONN_HEADER_2.54MM_2x6_RA_PMOD_MODULE | J5 |
| 1 | QSFP_CAGE | azonenberg_pcb:CONN_ZQSFP+_CAGE_TE_4-2170705-5 | J3 |
| 1 | TCA6424A | azonenberg_pcb:QFN_32_0.5MM_5x5MM | U1 |

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

azonenberg/latentred
Open hardware 48x 1000baseT + 2x 25G SFP28 Ethernet switch

azonenberg/stm32mp2-baremetal-tests
Experimenting with bare metal STM32MP2 development

azonenberg/triggercrossbar
Rack mountable crossbar matrix for T&M trigger in/out signals, allowing dynamic reconfiguration of an experiment without recabling



azonenberg/starshipraider
Open hardware test equipment


It measures 90 × 43 mm and has 4 copper layers, 1.6 mm thick.
45 parts, built around the TCA6424ARGJ, ARF6-08-S-D-A-K-TR and MI0603J601R-10. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the azonenberg/misc-devboards repository on GitHub, at the commit this page was made from: the board is qsfp-to-arc6/qsfp-to-arc6.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).