2 layers31.4 × 44 mm
2 layers56 × 28.1 mm
Luminography
ayuusweetfish/Luminography(🚧 ETA 2024.09) « Jeu de luminographie » — An electronic toy encouraging outdoor exploration
- Size
- 56 × 28.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 145
- Nets
- 129
- Pads
- 614
- Tracks, vias
- 744, 321
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 11 Aug 2024
- Updated
- 11 Sep 2025
Overview
Luminography is an open-source printed circuit board by ayuusweetfish, from the ayuusweetfish/Luminography repository on GitHub. It is a 2-layer board of 56 × 28.1 mm with 145 parts on 129 nets, routed with 744 tracks and 321 vias.
It is built around the BH1750FVI-TR, MAX98357AETE+T and MMC5603NJ, with the TPS61220DCK, W25Q16JVUXIQ and BMI270 among its other parts. Its parts include 60 ICs, 46 capacitors, 26 resistors, 2 diodes and 2 connectors. It belongs with the STM32 boards of this library.
Main components
12
BH1750FVI-TR
WSOF-6-40℃~+85℃ 2.4V~3.6V 65.535klx I2C Light Intensity WSOF-6 Ambient Light Sensors ROHSROHM SemiconductorAmbient Light Sensors
MAX98357AETE+T
TQFN-16-EP(3x3)-40℃~+85℃ 2.4mA 2.5V~5.5V 3.2Wx1@4Ω 77dB 92% Automatic mute/no-noise switch、Enable/shutdown function、Filterless architecture Class D TQFN-16-EP(3x3) Audio Amplifiers ROHSMaxim Integrated (Analog Devices)Audio Amplifiers
MMC5603NJ
WLP-4(0.8x0.8)-40℃~+85℃ 1.62V~3.6V 20bit 750uA、1.3mA、2.4mA、3.4mA I2C ±3mT ±3mT WLP-4(0.8x0.8) 3D Magnetic Sensors ROHSMEMSIC3D Magnetic Sensors
TPS61220DCK
SC-70-6(SOT-363)-40℃~+125℃@(TJ) 1 1.8V~6V 200mA 2MHz 5.5uA 700mV~5.5V Adjustable Boost Boost Built-in Yes SC-70-6(SOT-363) DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
W25Q16JVUXIQ
USON-8-EP(2x3)-40℃~+85℃ 100,000 cycles 10uA 133MHz 16Mbit 2.7V~3.6V 20 Years 3ms SPI USON-8-EP(2x3) NOR FLASH ROHSWinbond ElecNOR FLASH
BMI270
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 16bit 2KB 3.5uA Accelerometer Gyroscope SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps LGA-14(2.5x3) Accelerometers ROHSBosch SensortecAccelerometers
LTC4054ES5-4.2#PBF
SOT-23-5-40℃~+85℃ 1 200uA 4.25V~6.5V 4.2V 800mA Charging IC Lithium Battery Not supported Not supported SOT-23-5 Battery Management ROHSAnalog DevicesBattery Management
MAX17048G+T10
DFN-8-EP(2x2)-40℃~+85℃ 1 2.5V~4.5V 3uA I2C Lithium Battery Not supported Not supported DFN-8-EP(2x2) Battery Management ROHSMaxim Integrated (Analog Devices)Battery ManagementSPX3819M5-L-3-3
SOT-23-5-40℃~+85℃@(Ta) 1 20V 3.3V 420mV@(100mA) 500mA 5uA 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
TXS0102DCT
SSOP82-Bit Bidirectionnal Voltage-Level Translator for Open-Drain and Push-Pull ApplicationsTexas InstrumentsUncategorised
XS3A1T3157GMX
XSON-6(1x1.5)-40℃~+125℃ 1.4V~4.3V 120ns 130pF 2 2:1 40MHz 40ns 500mΩ 90ns XSON-6(1x1.5) Analog Switches, Multiplexers ROHSNexperiaAnalog Switches, Multiplexers
SMBJ5.0A
DO-214AA(SMB)-65℃~+150℃ 5V 600W@10/1000us 65.3A@10/1000us 7V 800uA 9.2V TVS Unidirectional DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHSMDDESD And Surge Protection (TVS/ESD)
Parts
145| Qty | Value | Footprint | References |
|---|---|---|---|
| 34 | 100n | Capacitor_SMD:C_0402_1005Metric | C10, C100, C101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C111, C112, C113, C114 +18 |
| 24 | BH1750FVI-TR | BH1750FVI-TR:WSOF6 | U100, U101, U102, U103, U104, U105, U106, U107, U108, U109, U110, U111, U112, U113, U114, U115 +8 |
| 24 | HD107S | Luminography_footprints:HD107S_2020_6 | U200, U201, U202, U203, U204, U205, U206, U207, U208, U209, U210, U211, U212, U213, U214, U215 +8 |
| 12 | 1.8k | Resistor_SMD:R_0402_1005Metric | R12, R100, R102, R104, R106, R108, R110, R112, R116, R118, R120, R122 |
| 5 | 1M | Resistor_SMD:R_0402_1005Metric | R5, R6, R7, R10, R14 |
| 4 | 10u | Capacitor_SMD:C_0402_1005Metric | C2, C5, C6, C21 |
| 4 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C1, C4, C8, C20 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 6.8p | Capacitor_SMD:C_0402_1005Metric | C11, C12 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1, SW2 |
| 1 | 1.8M | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 100 | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 107 | Resistor_SMD:R_0402_1005Metric | R114 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 10u | Inductor_SMD:L_Sunlord_SWPA252012S | L1 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R13 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C16 |
| 1 | 220k | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | 2k | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 32MHz 12pF | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 6.8k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | BMI270 | BMI270:QFN50P300X250X87-14N | U10 |
| 1 | Conn_01x04 | Luminography_footprints:TestPoints_1x04_P2.0 | J2 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | LTC4054ES5-4.2 | Package_TO_SOT_SMD:TSOT-23-5 | U1 |
| 1 | LiPo | Luminography_footprints:Pads_1x02_P2.5 | BT1 |
| 1 | MAX17048G+T10 | MAX17048G+T10:SON50P200X200X80-9N-D | U5 |
| 1 | MAX98357AETE+ | MAX98357AETE+:QFN50P300X300X80-17N | U12 |
| 1 | MMC5603NJ | MMC5603NJ:MMC5603NJ | U11 |
| 1 | SMBJ5.0A | Diode_SMD:D_SMB | D1 |
| 1 | SPX3819M5-L-3-3 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | STM32G030C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U6 |
| 1 | Speaker | Luminography_footprints:Pads_1x02_P2.5 | LS1 |
| 1 | TPS61220DCK | Package_TO_SOT_SMD:Texas_R-PDSO-G6 | U4 |
| 1 | TXS0102DCT | Package_SO:SSOP-8_2.95x2.8mm_P0.65mm | U8 |
| 1 | USB_C_Receptacle_PowerOnly_6P | Luminography_footprints:USB_C_Receptacle | J1 |
| 1 | W25Q16JVUXIQ | W25Q16JVUXIQ:SON50P300X200X60-9N | U9 |
| 1 | XS3A1T3157GMX | XS3A1T3157GMX:XS3A1T3157GMX | U2 |
| 1 | ZJY128R-IG01 | Luminography_footprints:FPC_12_P0.7 | U7 |
Questions
How big is the Luminography PCB?
It measures 56 × 28.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Luminography use?
145 parts, built around the BH1750FVI-TR, MAX98357AETE+T, MMC5603NJ and TPS61220DCK. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Luminography KiCad files?
From the ayuusweetfish/Luminography repository on GitHub, at the commit this page was made from: the board is hw/Luminography.kicad_pcb and its schematic hw/Luminography.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Luminography design in my own project?
Its repository states no licence, so its author keeps all rights: ask ayuusweetfish before reusing the design.
Similar boards
- 2 layers63.2 × 23.8 mm
Wand
ayuusweetfish/Malletwand
A pendulum as a hands-on musical interface for all · NIME 2024 Short Paper
68 parts1CERN-OHL-S-2.0 - 4 layers69.1 × 57.4 mm
Leggiero imported
hjafari890/passive-rf-backscatter-tag
Single-Sided FR-4 Passive RF Backscatter Tag System: Hardware, SDR Software, and Electrodynamic Modeling
24 partsMIT - 4 layers78 × 67.5 mm
Unified pcb
starduststorm/motionhexa
PCB designs and code for a motion-reactive, battery-powered hexagonal glowy object.
387 parts14 - 2 layers41.2 × 10.5 mm
- 4 layers122.1 × 95.5 mm
Boat PCB V3
ka1e27/dreams
Autonomous survey catamaran: CV-based obstacle avoidance, environmental sensing, and cellular telemetry to a web dashboard.
140 parts - 2 layers45 × 95 mm
Airquality
MorgenWebDigital/airquality
A battery-powered indoor air quality monitor. Real CO₂ from a photoacoustic sensor, VOC and NOx, temperature, humidity and ambient light, shown on a 2.13" e-paper display and sent over Bluetooth LE.
78 parts - 2 layers115.6 × 106.7 mm
ErgoSNM v3 left
siderakb/ergo-snm-keyboard
ErgoSNM is a split ergonomic keyboard integrated with trackball, wireless is in beta
90 parts172CERN-OHL-P-2.0