2 layers65 × 64 mm
2 layers34 × 36 mm
Buildbutton
ayoy/kicad-projects2- Size
- 34 × 36 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 11
- Pads
- 46
- Tracks, vias
- 101, 8
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 15 Jan 2018
- Updated
- 17 Oct 2018
Overview
Buildbutton is an open-source printed circuit board by ayoy, from the ayoy/kicad-projects repository on GitHub. It is a 2-layer board of 34 × 36 mm with 17 parts on 11 nets, routed with 101 tracks and 8 vias.
It is built around the IRLIZ44N. Its parts include 5 connectors, 4 ICs and 1 transistor. It belongs with the ESP32 boards of this library.
Main components
1Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10k | Resistors_SMD:R_1206_HandSoldering | R_BTN1, R_EN1 |
| 1 | 100nF | Capacitors_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C_PWR1 |
| 1 | 100uF | Capacitors_SMD:CP_Elec_6.3x7.7 | C_BLK1 |
| 1 | 1nF | Capacitors_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C_IO0 |
| 1 | 1nF | Capacitors_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C_EN1 |
| 1 | 4.7k | Resistors_SMD:R_1206_HandSoldering | R_IO0 |
| 1 | BATTERY | Socket_Strips:Socket_Strip_Angled_1x02_Pitch2.54mm | J1 |
| 1 | BUTTON | Socket_Strips:Socket_Strip_Angled_1x02_Pitch2.54mm | J3 |
| 1 | ESP32_DATA | Socket_Strips:Socket_Strip_Straight_2x01_Pitch2.54mm | U3 |
| 1 | ESP_UART | buildbutton2:ESP_UART_Socket_Strip | U4 |
| 1 | IO0 | Socket_Strips:Socket_Strip_Straight_1x01_Pitch2.54mm | J2 |
| 1 | IRLIZ44N | TO_SOT_Packages_SMD:TO-252-2 | Q1 |
| 1 | LED | TerminalBlocks_Phoenix:TerminalBlock_Phoenix_PT-3.5mm_2pol | J4 |
| 1 | S7V8F3 | pololu:S7V8F3 | U1 |
| 1 | U3V12F9 | pololu:U3V12F9 | U2 |
| 1 | USB | Socket_Strips:Socket_Strip_Angled_1x04_Pitch2.54mm | J5 |
Questions
How big is the Buildbutton PCB?
It measures 34 × 36 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Buildbutton use?
17 parts, built around the IRLIZ44N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Buildbutton KiCad files?
From the ayoy/kicad-projects repository on GitHub, at the commit this page was made from: the board is buildbutton/v2/buildbutton.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Buildbutton design in my own project?
Its repository states no licence, so its author keeps all rights: ask ayoy before reusing the design.
More from ayoy/kicad-projects
9- 2 layers65 × 64 mm
- 2 layers73 × 75 mm
- 2 layers34 × 33 mm
- 2 layers52 × 42.5 mm
- 2 layers65 × 30 mm
- 2 layers40 × 40 mm
- 2 layers36 × 20 mm
- 2 layers35 × 20 mm
Similar boards
- 2 layers
Led kitchen light controller
mattwach/avr_pico
My AVR libraries I've created over the years. Many of them have been augmented to be usable with Pi Pico as well.
15 parts6 - 2 layers
- 2 layers102.9 × 105.4 mm
- 2 layers160 × 100 mm
PCB multi-160x100
mkeller0815/MOSFET-RGB-PWM-Control
A small controllerboard that can be used by microcrontrollers to control bigger loads with MOSFET drivers
121 parts1CC0-1.0 - 2 layers70 × 80 mm
- 2 layers80 × 40 mm
- 2 layers120 × 76.1 mm
Temperature Activated Fan Controller
jiroegbu-eng/Temperature_Activated_Fan_Controller
A 12V fan controller circuit designed in KiCad. The board turns a cooling fan on or off based on temperature using a 10k NTC thermistor, an LM358 comparator, and an IRLIZ44N MOSFET.
15 parts - 2 layers79.9 × 40.1 mm
Openmv breakout
opinau/cv-2
Projekt je sufinancirala Europska unija iz Europskog fonda za regionalni razvoj
14 partsGPL-3.0