2 layers
Led kitchen light controller
mattwach/avr_pico
My AVR libraries I've created over the years. Many of them have been augmented to be usable with Pi Pico as well.
15 parts6
2 layers79.9 × 40.1 mm
Openmv breakout
opinau/cv-2Projekt je sufinancirala Europska unija iz Europskog fonda za regionalni razvoj
- Size
- 79.9 × 40.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 19
- Pads
- 38
- Tracks, vias
- 72, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Dec 2021
- Updated
- 6 Dec 2021
Overview
Openmv breakout is an open-source printed circuit board by opinau, from the opinau/cv-2 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 79.9 × 40.1 mm with 14 parts on 19 nets, routed with 72 tracks and 0 vias.
It is built around the IRLIZ44N. It belongs with the interfaces and adapters boards of this library.
Main components
1README
README.mdOPINAU-FILLER-CV-2
Europska unija
Zajedno do fondova EU
Projekt je sufinancirala Europska unija iz Europskog fonda za regionalni razvoj
Inovacijski vaučeri za MSP-ove
Operativni program: Konkurentnost i Kohezija 2014. - 2020.
Naziv projekta: OPINAU-FILLER-CV-2
OPINAU-FILLER-CV-2 projekt odnosi se na razvoj sklopovlja i popratne programske podrške (unutar Python/C++/ROS okruženja) za prototip sustava za beskontaktno mjerenje razine tekućine u boci prilikom punjenja u open-source punionici piva temeljen na principima računalnog vida sa mogućim odstupanjima od maksimalno 10%.
Partneri na projektu: Open Book d.o.o. i Fakultet elektrotehnike, strojarstva i brodogradnje Sveučilišta u Splitu
Ukupna vrijednost projekta: 72.000,00 HRK
Iznos koji sufinancira EU: 54.000,00 HRK
Razdoblje provedbe projekta: 09.08.2021. - 03.12.2021.
Kontakt osoba: Igor Cota
Repozitorij se sastoji od dva modula:
- OpenMV modul
- RaspberryPi modul
Prije korištenja pročitajte dokumentaciju.
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_Pad | H1, H2, H3, H4 |
| 3 | Conn_01x02_Female | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | inpput_5v1, J_LED_izlaz1, J_LED12V1 |
| 2 | Conn_01x08_Male | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1, J2 |
| 2 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R_mosfet1, R_mosfet1kohm1 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | Jumper_setup1 |
| 1 | Conn_01x03_Female | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Juart1 |
| 1 | IRLIZ44N | Package_TO_SOT_THT:TO-220F-3_Vertical | MOSFET1 |
Questions
How big is the Openmv breakout PCB?
It measures 79.9 × 40.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Openmv breakout use?
14 parts, built around the IRLIZ44N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Openmv breakout KiCad files?
From the opinau/cv-2 repository on GitHub, at the commit this page was made from: the board is modul 1 - openmv/Kodovi/kicad_nacrt/openmv_breakout/openmv_breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Openmv breakout design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers
- 2 layers102.9 × 105.4 mm
- 2 layers160 × 100 mm
PCB multi-160x100
mkeller0815/MOSFET-RGB-PWM-Control
A small controllerboard that can be used by microcrontrollers to control bigger loads with MOSFET drivers
121 parts1CC0-1.0 - 2 layers70 × 80 mm
- 2 layers80 × 40 mm
- 2 layers120 × 76.1 mm
Temperature Activated Fan Controller
jiroegbu-eng/Temperature_Activated_Fan_Controller
A 12V fan controller circuit designed in KiCad. The board turns a cooling fan on or off based on temperature using a 10k NTC thermistor, an LM358 comparator, and an IRLIZ44N MOSFET.
15 parts - 2 layers73.2 × 67.1 mm
