2 layers100 × 100 mm
2 layers80 × 40 mm
Current sensors, FC short and Current control
- Size
- 80 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 26
- Pads
- 108
- Tracks, vias
- 381, 5
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 23 Apr 2025
- Updated
- 27 May 2025
Overview
Test2 is an open-source printed circuit board by HydrogreenPollub, from the HydrogreenPollub/pcb-fuel-cell-module repository on GitHub, published under the MIT licence. It is a 2-layer board of 80 × 40 mm with 25 parts on 26 nets, routed with 381 tracks and 5 vias.
It is built around the 2EDN8534FXTMA1, IRFP4468PBF and IRLIZ44N, with the MUR860 among its other parts. Its parts include 6 resistors, 5 capacitors, 4 transistors, 4 connectors and 2 ICs.
Main components
4
2EDN8534FXTMA1
SOIC-8-40℃~+150℃ 1.9V~2.3V 1V~1.4V 2 4.5V~20V 5A 5A 6ns 8.6ns Low Side MOSFET Under Voltage Protection、Enable shutdown、Interleaved conduction protection SOIC-8 Gate Drivers ROHSInfineon TechnologiesGate Drivers
IRFP4468PBF
TO-247AC-55℃~+175℃ 1 N-channel 1.36nF 100V 19.86nF 2.6mΩ@10V 290A 4V 520W 540nC@10V 540pF N-Channel TO-247AC MOSFETs ROHSInfineon TechnologiesMOSFETs
IRLIZ44N
TO-220-FP1 N-channel 1.7nF@25V 22mΩ@17A,10V 2V@250uA 30A 48nC@5V 55V TO-220-FP MOSFETsInfineon TechnologiesMOSFETs
MUR860
TO-220-2-65℃~+175℃ 1 Independent 1.5V@8A 100A 10uA@600V 600V 60ns 8A TO-220-2 Fast Recovery / High Efficiency Diodes ROHSonsemiFast Recovery / High Efficiency Diodes
README
README.mdView this project on CADLAB.io.
FC_Module
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 20R | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P5.08mm_Vertical | R5, R7 |
| 2 | 47n | Capacitor_SMD:C_1206_3216Metric | C2, C4 |
| 2 | HallSensor | Library:LTS-25-NP_1 | LTS_25-NP_8A1, LTS_25-NP_25A1 |
| 2 | IRFP4468PBF | Library:TO546P531X1558X2499-3P | Q1, Q4 |
| 2 | IRLIZ44N | Package_TO_SOT_THT:TO-220F-3_Vertical | Q2, Q3 |
| 2 | XT 60 | Connector_AMASS:AMASS_XT60PW-M_1x02_P7.20mm_Horizontal | J6, J8 |
| 1 | 0 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P5.08mm_Vertical | R8 |
| 1 | 0R | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P5.08mm_Vertical | R6 |
| 1 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | 1nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5 |
| 1 | 20R | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P7.62mm_Vertical | R1 |
| 1 | 2EDN8534FXTMA1 | Library:SOIC127P602X173-8N | IC1 |
| 1 | 4,7n | Capacitor_SMD:C_1206_3216Metric | C3 |
| 1 | 50k | Resistor_SMD:R_1206_3216Metric | R2 |
| 1 | FCCU | Connector_Molex:Molex_Mini-Fit_Jr_5569-10A1_2x05_P4.20mm_Horizontal | J9 |
| 1 | HO 25-P | footprints:HO 25-P_LEM | U1 |
| 1 | MUR860 | Package_TO_SOT_THT:TO-220-2_Vertical | D2 |
| 1 | Master | Connector_Molex:Molex_Mini-Fit_Jr_5569-10A1_2x05_P4.20mm_Horizontal | J10 |
The 24 most common of 25 parts.
Questions
How big is the Test2 PCB?
It measures 80 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Test2 use?
25 parts, built around the 2EDN8534FXTMA1, IRFP4468PBF, IRLIZ44N and MUR860. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Test2 KiCad files?
From the HydrogreenPollub/pcb-fuel-cell-module repository on GitHub, at the commit this page was made from: the board is test2.kicad_pcb and its schematic test2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Test2 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers
ZVS
bharat-ops77/Zero-Voltage-Switching-Circuit
An astable-multi-oscillator circuit that can be used to generate sine wave in order to drive transformers or induction coils.
16 parts1GPL-3.0 - 8 layers276.6 × 155.9 mm
- 2 layers99.5 × 99.5 mm
Carico elettronico
dario0603/electronic_load
Un progetto open-source per la progettazione e simulazione di un Carico Elettronico Bipolare (Electronic Load), ideato per il test e la caratterizzazione di alimentatori, batterie e circuiti di potenza.
92 parts - 2 layers219 × 135.5 mm
- 2 layers90 × 100 mm
- 2 layers137.2 × 66 mm
- 2 layers280 × 120 mm
Softstart
Synthron/SymAsym
High Power Audio Amplifier based on the Red Devil SymAsym PCBs from audiopcb.de
94 parts2