Skip to the content
2 layers70.9 × 41 mmKeyboardSecurity, the printed circuit board in 3D

The compiled firmware will be placed in the .pio/build/promicro16/ directory.

Size
70.9 × 41 mm
Copper layers
2
Thickness
1.6 mm
Parts
28
Nets
58
Pads
112
Tracks, vias
143, 54
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
15 Feb 2025
Updated
26 May 2025

Overview

KeyboardSecurity is an open-source printed circuit board by aykutozdemir, from the aykutozdemir/K810_Security repository on GitHub. It is a 2-layer board of 70.9 × 41 mm with 28 parts on 58 nets, routed with 143 tracks and 54 vias.

It is built around the HC-05, BC847 and IRLML5103TRPBF. Its parts include 13 resistors, 5 connectors, 3 capacitors, 3 ICs and 2 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

3

README

README.md

K810_Security

PlatformIO Build Instructions

Prerequisites

  • Python and pip installed
  • PlatformIO installed (pip install platformio)

Compilation

To compile the project, use one of these commands:

bash
pio run
# or
platformio run

Additional Useful Commands

  • pio run -t upload - Compile and upload to the board
  • pio run -t clean - Clean the build directory
  • pio run -t program - Compile and program the board
  • pio device monitor - Open the serial monitor

The compiled firmware will be placed in the .pio/build/promicro16/ directory.

Build Scripts

The project includes several Python scripts that enhance the build process:

generate_version.py

Automatically increments and manages build version numbers. The version is stored in version.txt and is included in the firmware as a build flag.

asembly_analyzer.py

Analyzes the assembly code of the compiled firmware, providing:

  • Disassembly of the firmware
  • Analysis of Interrupt Service Routines (ISRs)
  • Register usage statistics
  • Stack push/pop balance checking

Usage:

bash
pio run -t disasm  # Generate and analyze disassembly

map_analyzer.py

Analyzes the memory map of the compiled firmware, showing:

  • Symbol sizes and addresses
  • Memory usage by function
  • Type of memory (code, data, BSS)

Usage:

bash
python map_analyzer.py [--file path/to/firmware.elf] [--filter tTbBdD]

custom_build.py

Applies custom build flags and optimizations:

  • Disables unused parameter warnings
  • Applies C++ specific optimizations
  • Configures build environment for Arduino framework

Parts

28
QtyValueFootprintReferences
5470RResistor_SMD:R_0805_2012MetricR3, R4, R6, R7, R11
310kRResistor_SMD:R_0805_2012MetricR5, R8, R10
2100nFCapacitor_SMD:C_0805_2012MetricC1, C3
21kResistor_SMD:R_0805_2012MetricR12, R13
1100kRResistor_SMD:R_0805_2012MetricR9
110uFCapacitor_SMD:C_1812_4532MetricC2
11k5RResistor_SMD:R_0805_2012MetricR2
11kRResistor_SMD:R_0805_2012MetricR1
1BC847Package_TO_SOT_SMD:SOT-23Q2
1Control ButtonConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalSW1
1DMConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ5
1DPConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ4
1HC-05hc-05:XCVR_HC-05U2
1IRLML5103TRPBFirlml5103:SOT95P237X112-3NQ1
1LD1117S33TR_SOT223Package_TO_SOT_SMD:SOT-223-3_TabPin2U3
1LED_Dual_AKAConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalD1
1PowerConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ1
1SCLConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ3
1SDAConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ2
1Sparkfun_Pro_MicroArduino:Sparkfun_Pro_MicroU1

Similar boards

  • 2 layers122 × 88 mmLipo drainer schematic, the printed circuit board in 3D

    Lipo drainer schematic

    mattwach/battery_drainer

    Hardware to safely discharge LIPO batteries to storage levels

    64 parts11Apache-2.0
  • 4 layers80 × 100 mmNuBiHo atmega328P, the printed circuit board in 3D

    NuBiHo atmega328P

    clover-clever/NuBiHo_Quad_Drone

    Microprocessor Quad Drone System, based on SPRacing R3 w/Arduino PPM Control Signal

    81 parts
  • 4 layers126.6 × 37.7 mmGruzik2.0, the printed circuit board in 3D

    Gruzik2.0

    NYDEREK/LineFollower_GRUZIK2.0-light

    GRUZIK2.0 is simple light construction made for "line follower light" competition

    50 parts101MIT
  • 2 layers100 × 100 mmMain board V2, the printed circuit board in 3D

    Main board V2

    Resaj/cyclops-project

    Robot de carreras open source con cámara

    31 parts53
  • 2 layers90.9 × 38.4 mmSnaaur v1, the printed circuit board in 3D

    Snaaur v1

    duongngochoan/Self_balancing_robot_PID

    Used a PID control algorithm and MPU605 sensor to balance a two-wheeled robot.

    58 parts7
  • 2 layers56.8 × 68.6 mmEmg, the printed circuit board in 3D

    Emg

    leikoilja/muscle-imbalance-detection

    A device to assist patients with the rehabilitation of the knee joint after a knee surgery using EMG biofeedback. The device can reliably detect muscle activity and display it in an easy-to-use mobile application.

    84 parts6MIT
  • 2 layers135.8 × 56.1 mmPower board, the printed circuit board in 3D

    Power board

    xtarke/automated_buggy

    This shield connects microcontroller (MSP-EXP430FR2355) pins to the car's power board. Go to Power Board for more hardware information.

    87 parts5GPL-3.0
  • 2 layers33 × 58.8 mmFusion, the printed circuit board in 3D

    Fusion

    chungyu710/Fusion

    Capstone Design Project

    36 parts4

Questions

How big is the KeyboardSecurity PCB?

It measures 70.9 × 41 mm and has 2 copper layers, 1.6 mm thick.

What parts does the KeyboardSecurity use?

28 parts, built around the HC-05, BC847 and IRLML5103TRPBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the KeyboardSecurity KiCad files?

From the aykutozdemir/K810_Security repository on GitHub, at the commit this page was made from: the board is KiCAD/KeyboardSecurity/KeyboardSecurity.kicad_pcb and its schematic KiCAD/KeyboardSecurity/KeyboardSecurity.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the KeyboardSecurity design in my own project?

Its repository states no licence, so its author keeps all rights: ask aykutozdemir before reusing the design.