

RBS HC2019
- Size
- 96.8 × 80.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 55
- Pads
- 134
- Tracks, vias
- 162, 5
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Aug 2019
- Updated
- 3 Sep 2019
Overview
RBS HC2019 is an open-source printed circuit board by awkwardbunny, from the awkwardbunny/RBS-HC2019 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 96.8 × 80.9 mm with 33 parts on 55 nets, routed with 162 tracks and 5 vias.
It is built around the NCP1117ST. Its parts include 9 connectors, 7 capacitors, 5 resistors, 3 ICs and 2 transistors.
Main components
1README
README.mdRBS-HC2019
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3, R4, R5 |
| 5 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C4, C5, C6, C7 |
| 2 | 47u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2 |
| 2 | LM741 | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U1, U2 |
| 2 | Q_PMOS_GDS | Package_TO_SOT_SMD:TO-252-2 | Q1, Q2 |
| 1 | 10u | Inductor_SMD:L_Wuerth_HCI-1365 | L1 |
| 1 | Alarm | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J5 |
| 1 | Battery_Cell | custom:Keystone_1048_2x18650 | BT1 |
| 1 | Coil | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J9 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J6 |
| 1 | D | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D1 |
| 1 | Fan_Power | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J7 |
| 1 | LEDs | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J3 |
| 1 | LOGO | custom:HackCooper | G*** |
| 1 | LOGO | custom:RBS_1.5in | G*** |
| 1 | NCP1117 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | RPi_Header | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J1 |
| 1 | SW_DIP_x01 | Button_Switch_THT:SW_DIP_SPSTx01_Slide_6.7x4.1mm_W7.62mm_P2.54mm_LowProfile | SW1 |
| 1 | Smoke_Sensor | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J2 |
| 1 | Temp_Sensor | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J4 |
| 1 | USB_Power | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8 |
The 32 most common of 33 parts.
More from awkwardbunny/RBS-HC2019
1- 2 layers25 × 21.3 mm

Similar boards
- 2 layers100.1 × 63.1 mm

Fg99
endlos99/finalgrom99
A cartridge for the TI 99/4A that runs ROM and GROM images from an SD card
34 parts96GPL-3.0 - 2 layers61.8 × 18.5 mm

- 2 layers67.4 × 54.3 mm

- 2 layers66 × 26 mm

STM32-udemy
facens-omegabotz/stm32-board
KiCad Projet of PCB design for a development board for the STM32f446 MCU
31 parts3Apache-2.0 - 2 layers35.8 × 70.1 mm

- 2 layers95 × 50 mm

- 2 layers64.8 × 32 mm

- 4 layers50 × 100 mm

Questions
How big is the RBS HC2019 PCB?
It measures 96.8 × 80.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RBS HC2019 use?
33 parts, built around the NCP1117ST. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RBS HC2019 KiCad files?
From the awkwardbunny/RBS-HC2019 repository on GitHub, at the commit this page was made from: the board is board/board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RBS HC2019 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).